alzapower APW-PS400 Portable Power Station User Manual

alzapower APW-PS400 Portable Power Station

THANK YOU FOR CHOOSING US!
We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase. We are environmentally conscious, therefore we use special eco- friendly packaging. Please recycle! Recycling and Environmental Protection We try to avoid using plastic packaging and film and only use them when they are absolutely neces­sary to protect the product. So how are we different?
Packaging you can eat … Well, almost. 🙂

• We use ink made from soybeans as opposed to classic petroleum-based ink.
• The majority of our packaging is made from 100% recyclable paper.
• We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones.

We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place the findings of the scientific community into practice. We don’t just try to meet quotas and mandates, we aim to exceed them.

TECHNICAL PARAMETERS

1228.8 Wh (3.2 V/384 800 mAh) i 100-120V~,60Hz
Input| AC| 6 00W|
1220-240 V~, 50 Hz
XT60 (for solar panel)| 12-30 V/max. 7 A (max. 200 W); built-in solar charging controller MPPT
DC 5521| 12-30 V/max. 7 A (max. 200 W)
Inverter waveform| Pure sine wave
AC outlet| Rated power: 1,000W| 100-120V~,60Hz
Peak power: 2,000 w| 220-240 V~, 50 Hz
2x USB-C output| PD 100 W (5 V/9 V/12 V/15 V/20 V, max. 5 A)
4x USB-A output| OC3.0 (5 V/3 A; 9 V/2 A; 12 V/2 A) for 1 output; max. 18 W
1x cigarette connector| 13.6 V/8 A, max. 108.8W| Total share 8 A max.
2x DC5521| 13.6 V/8 A, max. 108.8W

OVERVIEW

1. DC button Turns the DC power on/off .
2. DC output connectors Connect to DC-powered devices.
3. Cigarette connector Used to connect the cigarette connector.
4. DC input connector Used to connect to a DC station charging adapter
5. AC input connector Used to connect to AC station charging adapter.
6. Solar panel inputs Used to connect the station charging adapter from a solar panel
7. AC button Used to turn on/off AC power.
8. Power outlets Used to connect the power plug of an electrical appliance.
9. Display Displays station operating status data.
10. USB button Turns on / off charging the device via USB.
11. 4x USB-A port QC3.0
12. 2x USB-C port PD1 OOW
13. Main power switch Used to turn on / off the station.
14. Grounding connector

DISPLAY

INSTRUCTIONS

Only charge the station with the supplied charging adapter. Charge the station fully before use. Input connectors intended for charging are:

• AC input connector for charging from an AC outlet; super fast charging (max. power 600 W);
• XT60 input connector for charging from the solar panel (solar panel not included); or
• input connector DC5521 for charging e.g. from a car battery.

Note: If you will not be using the station for a long time, we still recommend charging it regularly, at least every 3 months. This will extend the life of the built-in battery.

Serial/ parallel charging via solar panel
The portable station supports charging via a solar panel with a maximum output of 200 W. The solar panel is not included in the package and must be purchased separately, including a con­necting cable, which will be equipped with a terminal suitable for connection to the station. This is the only way to achieve fast and efficient charging.

WARNING: The maximum voltage of the solar panels that the portable station supports is 30 V and the maximum current is 7 A.

Attention: The portable station must be charged via solar panels with a voltage of less than 30 V. An input voltage exceeding 30 V can seriously damage the station.

Station use – alternating current
The portable station allows to supply up to 4 appliances with alternating current at the same time, provided that the total power output does not exceed 1,000 W.

1. Press and hold the power switch to turn on the station. The power switch indicator and the display light up. The station switches to standby mode.
2. Insert the plug of the appliance into the power outlet in the station.
3. Press the AC button to turn on the AC power for the appliance.
4. After use, press the AC button to turn off the power. The station switches to standby mode. Un­plug the appliance from the power outlet.
5. To switch off the station completely, press and hold the main switch.

Station use direct current

1. Press and hold the power switch to turn on the station. The power switch indicator and the display light up. The station switches to standby rnode.
2. Plug the cable end of the device you want to charge to the DC connector.
3. Press the DC button to turn on the DC power of the device.
4. After use, press the DC button to turn off the power. The station switches to standby rnode. Pull out the connector frorn the port.
5. To switch off the station completely, press and hold the main switch.

Station use – USB output

1. Press and hold the power switch to turn on the station. The power switch indicator and the display light up. The station switches to standby mode.
2. Press the USB button to turn on the device via USB.
3. Plug the end of the USB connecting cable into the USB port. Plug the other end of the USB con necting cable into a port on your device.
4. After use, press the USB button to turn off the power. The station switches to standby mode. Pull the terminal out of the USB port.
5. To switch off the station completely, press and hold the main switch.

Use of the UPS backup function

1. Connect the portable station to the power outlet using the supplied power adapter. The station turns on automatically and starts charging.
2. Plug the appliance into the power outlet in the station.
3. Press the AC button to start the alternate current. The connected equipment enters UPS backup mode.
4. If you disconnect the portable station from the electrical outlet, the station will continue to supply power to the connected device.

Attention: Make sure that the portable station is plugged into a properly grounded AC outlet with a stable and normal voltage.

To ensure that the UPS backup function is used correctly, the total power of the connected devices must be less than 800 W. If the power is greater than 800 W, the portable station will automatically shut down power and charging from the electrical outlet and will only supply power to the connected devices.

CLEANING AND STORING

Keep the portable station clean. Before cleaning, make sure that the station is disconnected from the power supply and that all connectors of the connected devices are disconnected. Use only a soft, dry cloth to clean the station. Do not use a cloth soaked in clean water or water con­taining detergent to clean it. If the station is very dirty, we recommend using a piece of a cotton swab with a small amount of high-percentage pure alcohol to wipe the surface of the station. Do not use chemicals, harsh cleaners, solvents, gasoline or other similar substances to clean the portable station.
Warning: Never immerse the portable station in water or any other liquid. Do not rinse the portable station under running water or any other liquid.
Storage If you are not going to use the portable station, store it in a dry and well-ventilated place.
Charge the portable station regularly, at least once every three months. This will extend the life of the built-in battery.

FREQUENT QUESTIONS

contains a lithium battery and according to the valid international rules of air transport, only equipment with a lithium battery with a total power not exceeding 100 W can be transported on board the aircraft.
It does not charge the station, even though the total power of the connected devices is within the total power of the station.| The station is not fully charged. Charge it and then you can use it.
The station emits noises sometime.| The station is equipped with an air cooling sys­ tem. This makes it easier for the built-in fan to dissipate heat, so you may hear the sound of the fan during use. This is a normal occurrence.

SAFETY INFORMATION

• This product is for domestic use only.
• This product is not a toy. It may contain small components. Please keep away from children.
• Read the operating instructions carefully before use.
• Please check compatibility with the information specified on the product before use.
• Unplug the product from power sources when not in use.
• Only use the product for the specified purpose of use.
• Take extra care when using the product near children.
• Incorrect use of the product can lead to a risk of fire, explosion or other hazard and can result in a voided warranty.
• Do not insert fingers, hands or objects into any openings in the product.
• Use only accessories supplied with the product or recommended by the manufacturer. Otherwise, there is a risk of fire, electric shock or injury.
• Use only the supplied adapters to charge the product.
• When charging and using the product, ensure that there is sufficient free space around the product for proper air circulation.
• Under no circumstances should you cover the product while it is charging or you are using it.
• Do not use or leave the product in dusty or otherwise contaminated environments.
• Do not expose the product to high temperatures or low temperatures. Keep the product in a dry environment.
• Do not expose the product or its accessories to moisture or immerse them in liquids. Do not expose them to dripping or splashing water. Do not place water containers, such as vases, on them.
• Do not expose the product or its accessories to fire, excessive heat or direct sunlight. It is forbidden to place sources of open fire on them, such as burning candles.
• Do not use or store the product in places where open flames are used, where flammable or explosive substances are used or stored.
• Do not disassemble, damage or short-circuit the product. Attempting to modify the power bank may damage the product and result in serious injury.
• Do not use the product if it is damaged or emits a suspicious odour.
• If battery fluid leaks, avoid direct contact with both fluid and battery. In case of skin contact, rinse the area with plenty of clean water. In case of contact of the liquid with eyes, seek medical help immediately.
• If the product needs to be repaired or maintenance is required that cannot be performed by the user, contact an authorized service center. The product does not contain parts serviceable by the user. Improper handling of the product may result in a risk of fire or electric shock.
• Use a soft, clean, dry towel for cleaning the surface of the product.
• Do not disassemble the product. Attempting to modify the power bank may damage the product and result in serious injury.

WARRANTY & SUPPORT

Your new product is protected by our 24-month warranty, or extended warranty (if stated), which you can apply at any of our points of sale. For inquiries, you can use the contact form or one of our international call centres.

This product meets all of the related basic EU regulatory requirements. The EU declaration of conformity is available on www.alzashop.com/Doc. This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item. “For indoor use only” symbol indicates that the product is not intended for outdoor use.

Co. Reg. No. 270824’10
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic It) 2021 Alza.cz a.s. All Rights Reserved.

www.alzapower.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>