Comfee CDC22P2AWW Countertop Portable Dishwasher Instruction Manual

CDC22P2AWW Countertop Portable Dishwasher
Instruction Manual

Parts provided

You’ll soon be enjoying your new appliance

Quick connect hose components as follows：

• Inlet Hose
  

• Faucet Adapter
  

• Quick Connect
  

Common connect hose as follow：

• Inlet Hose
  

Inlet Water Connection

Bringing it all together
METHOD 1: Direct Connect with Faucet

1. Take the existing aerator off your faucet.

2. Screw the faucet adapter onto (or into) the faucet tap. Check for leaks (Use Teflon tape to eliminate if necessary).
   IMPORTANT:
   Please confirm whether the supplied adapter is suitable for your faucet tap.
   If not, please contact your local plumbing supply center where adapter is available for purchase .
   

3. Connect the star-shaped connection of the inlet hose onto the inlet port on the back of dishwasher.

4. Connect the circular connection of the inlet hose onto the shorter male of the quick connect.

5. Attach the quick connect onto the faucet adapter by pulling down the locking collar on the quick connect.

6. Slowly open the hot water line and check for any sign of water leaks at all hose connections.

IMPORTANT:
Once you open the water supply line, the inlet hose will be pressurized.
If you want to remove the quick connect from faucet adapter, please close the faucet first and then press the red pressure relief button to relieve water pressure before taking off the quick connect.

METHOD 2 : Connect Under Counter

1. Connect the water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place.
   MPORTANT:
   If your inlet hose is not a 3/4 inches male threaded, you’ll need an adapter to ensure a proper fit

2. Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure that the water drain hose is not kinked or crushed.

IMPORTANT:
If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance. Please securely fix the drain hose in either position A or position B.

Using Your Dishwasher

Let’s get started

Before first use : Fill the dispenser of rinse aid and detergent
IMPORTANT:
To get the best performance from your dishwasher, read all operating instructions before using it for the first time. Clean up any rinse aid spilled during with an absorbent cloth to avoid excessive foaming during the next wash. Don’t forget to replace the dispenser’s cap before you close dishwasher door.

Troubleshooting

We are always here to help
If you require any technical guidance or find that your washing machine is not operating as intended, a simple solution can often be found in the troubleshooting section of the Owner’s Manual.

Commonly seen error codes

or water pressure is too low.
E3| Not reaching required temperature.| Malfunction of heating element.
E4| Overflow| Some element of dishwasher leaks.
Ed| Failure of communication between main PCB with TFT PCB.| Open circuit or break of wiring for the communication.

For further assistance, feel free to contact us at 1-866-646-4332 with the following information ready:
Thank you so much for choosing Comfee’ appliances.
We really appreciate your choice and would love to  elp you get started.
Customer Assistance
1-866-646-4332

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>