SUPERCHEAP AUTO PLU 630463 2 In 1 Convertible Garage Creeper and Seat Owner’s Manual
- June 9, 2024
- SUPERCHEAP AUTO
Table of Contents
2 IN 1 CONVERTIBLE GARAGE CREEPER AND SEAT
PRODUCT MANUAL
WARRANTY
Our product is guaranteed to be free from quality and manufacturing defects
for a period of 12 months.
If your product becomes defective during this period, SRGS PTY LTD will offer
you either a replacement, credit or refund where a product is faulty; wrongly
described; different from the sample shown to you or do not do what they are
supposed to do.
This warranty will not cover substantially modified product; misuse or abuse
of the product contrary to user instructions or packaging label; change of
mind and normal wear
and tear.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and failure does not amount to a major failure.
To claim the warranty, take the product to the front Service Desk of your
nearest store of purchase. You will need to show receipt or other proof of
purchase. Additional information may be required to process your claim. Should
you not be able to provide proof of purchase with a receipt or bank statement,
identification showing name, address and signature may be required to process
your claim.
Any expenses relating to the return of your product to the store will normally
have to be paid by you. For online store purchases, SRGS PTY LTD will pay for
the return freight for any product assessed as having a major failure.
The benefits to the customer given by this warranty are in addition to other
rights and remedies of the Australian Consumer Law in relation to the goods or
services to which this warranty relates.
This warranty is provided by SRGS PTY LTD, 6 Coulthards Avenue, Strathpine QLD
4500, Australia. Phone: 1300 175 010.
PREPARATION
Ensure that all parts are present before assembling your 2 in 1 Convertible Garage Creeper and Seat. Do not attempt to assemble or use the product if any parts are missing or damaged
| Part | Description | Qty |
|---|---|---|
| 1 | Foam Padded Creeper Section | 3 |
| 2 | Hex Key | 1 |
| 3 | Open End Wrench | 1 |
| 4 | M8 Hex Head Bolt (65mm) | 4 |
| 5 | M8 Flat Washer | 16 |
| 6 | M8 Hex Nut | 4 |
| 7 | 360° Swivel Castor Wheel (50mm) | 8 |
| 8 | Castor Wheel Fastener | 5 |
ASSEMBLY INSTRUCTIONS
- Place the Foam Padded Creeper Sections (1) face down on a flat surface (as shown in Figure 1), aligning all the outside and inside holes. Ensure the Middle Creeper Section is in the correct orientation.
- Place one M8 Flat Washer (5) through the head of the M8 Hex Head Bolt (4), then insert through the aligned hole, starting from the outside and pushing through the hole.
- Place one M8 Flat Washer (5) through the head of the aligned bolt and secure with one M8 Hex Nut (6). Tighten enough that the creeper seat can still fold freely, repeat step 2 and 3 for the remaining three holes.
- Middle & Rear Wheels: Insert one Castor Wheel Fastener (8) into the top of the frame, then place one M8 Flat Washer (5) through the Castor Wheel (7) and screw in from underneath the frame. Repeat for remaining four middle and rear wheels (see Figure 2).
- Head Frame Wheels: Place one M8 Flat Washer (5) through the Castor Wheel (7). Screw directly into hole underneath the Head Frame and tighten using Open End Wrench (3).
- Use Open End Wrench (3) to tighten all Castor Wheels (7) and use Hex Key (2) to tightly secure
- Do not use or operate the all Castor Wheel Fastener (8) assembled in above steps. until all castor wheels 2 in 1 Convertible Garage Creeper and Seat and bolts are tightly secure as injury may occur.
OPERATING INSTRUCTIONS
Maximum Weight Capacity: 100kg
Seat Mode
- Unlock the Locking Pin by pulling it out until disengaged from the Locking Hole, at the same time flip the Middle Frame towards the end of the Rear Frame until the Locking Pin can engage with the Locking Latch as shown in Figure 3. Ensure the Locking Pin is fully engaged with the Locking Hole before use.
- Flip the Head Frame towards the opposing end of the Rear Frame until it sits horizontally as shown in Figure 3.
Creeper Mode
- Unlock the Locking Pin by pulling it out until disengaged. Reverse the above steps 1 and 2 to convert the mechanics seat mode back into creeper mode as shown in Figure 4. Ensure the Locking Pin is fully engaged with the Locking Hole before use.
Failing to adhere to these operating instructions could result in injury.
Manufactured and packaged for SRGS PTY LTD ABN 23 113 230 050
6 Coulthards Avenue, Strathpine QLD 4500, Australia
MADE IN CHINA
Documents / Resources
|
SUPERCHEAP AUTO PLU 630463 2 In 1 Convertible Garage Creeper and
Seat
[pdf] Owner's Manual
PLU 630463 2 In 1 Convertible Garage Creeper and Seat, PLU 630463, 2 In 1
Convertible Garage Creeper and Seat, Convertible Garage Creeper and Seat,
Garage Creeper and Seat, Creeper and Seat, Seat
---|---