LEEDARSON CAG1a100015W7P LED Luminaire User Manual
- June 9, 2024
- LEEDARSON
Table of Contents
Model CAG1a100015W7P
Product features:
Controlled by microwave 5.8 G to realize the Motion Detection.
| Product Name | LED Luminaire |
|---|---|
| Brand Name | LEEDARSON |
| Model No. | CAG1a100015W7P |
| Work Temperature | -20℃-40℃ |
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
This device comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC radiation exposure limits set forthfor an uncontrolled environment. This equipment should be installed andoperated with minimum distance of 20 cm between the radiator and yourbody.
luminaires Installation Height: Rated 3 m.
- Motion Sensor Detect Range: Rated 3 m.
- Motion Sensor Detect Angles: 90° based on 3m. installation height (the detect angle differs with the different installation height)
- Hold-time: Light will keep stay on 30s ±3 after motion stops
- When the luminaires powered on, the luminaires will lights on about 10s, then light off, the motion sensor starts to detect the react it based on the movement around.