RAKARG15 8dBi Fiberglass Antenna User Manual
- June 9, 2024
- RAK
Table of Contents
RAKARG15 8dBi Fiberglass Antenna User Manual
Warning
FCC Warning：
This device complies with part 15 of the FCC Rules. Operation is subject to
the
following two conditions.
- This device may not cause harmful interference;
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement:
“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.”
INTEGRATION INSTRUCTIONS
- This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna installation and operating configurations of this transmitter, including any applicable source-based time- averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of 2.1091. This equipment complies with FCC & Industry Canada exposure limits set forth for an uncontrolled environment.
- When the module is installed in the host device, the FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: ―Contains FCC ID: 2AF6B RAK5147.
- The Shenzhen Rakwireless Technology Co., Ltd. modular transmitter is only FCC authorized for the FCC Part15.247 listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. If the grantee markets their product as being Part 15 Subpart B compliant (when it also contains unintentional radiator digital circuity), then the grantee shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
RF Exposure:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
ISED Warning:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC & Industry Canada exposure limits set forth for an uncontrolled environment.
The host product shall be properly labelled to identify the modules within the host product. The ISED certification label of a module shall be clearly visible at all times when installed in the host product; otherwise, the host product must be labelled to display the ISED certification number for the module, preceded by the word “contains” or similar wording expressing the same meaning, as follows:
RSS-102 Statement
This equipment complies with IC RSS_102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your body.
Labelling
The proposed FCC IC label format is to be placed on the module. If it is not visible when the module is installed into the system, “Contains FCC ID: 2AF6B- RAK5147, Contains IC: 25908-RAK5147” shall be placed on the outside of final host system.
Labelling
- This radio transmitter [25908- RAK5147] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
Antenna #| Manufacturer| Model| Antenna Gain| Antenna
Type| Connector Type
---|---|---|---|---|---
1#| Shenzhen RAKwireless Technology Co., Ltd| RAKARG15| 8dBi| Fiber Glass
Antenna| N-type male connector
2#| RAKARG14| 5.8dBi| Fiber Glass Antenna| N-type male connector
3#| RAKARG19| 5.1dBi| Fiber Glass Antenna| N-type male connector
4#| RAKARJ14| 2.3 dBi| Dipole Antenna| RPSMA connector
5#| RAKARJ16| 2.3 dBi| Dipole Antenna| RPSMA connector
About RAKwireless:
RAKwireless is a pioneer in providing innovative and diverse Cellular and
LoRaWAN connectivity solutions for both Edge and Gateway IoT devices. We
believe that through easy to use and modular designs we can accelerate the
time to market for various IoT Applications in order to optimize system
deployment in both Developer and Commercial settings.