COSTWAY HW69767 Wicker Swing User Manual
- October 29, 2023
- COSTWAY
Table of Contents
COSTWAY HW69767 Wicker Swing
Before You Start
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise assembly difficulties
may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to
make sure all parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will
be used.
Keep the hand tools close at hand. Do not use power tools to assemble your
furniture. They may scratch or damage the parts.
Notice
- 50% tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
- Place the item on a flat ground to adjust and make sure it remains stable.
- Tighten up all screws with tools gradually.
- If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
- If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again.
- Note: If one or some screws are fully tightened during assembly, the others may not be aligned with the holes. In addition, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.
Parts List
Hardware List
Assembly
Care And Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting. Use of
furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area. Using
solvents of any kind on your furniture may damage the finish. Never use water
to clean your furniture as it may cause damage to the finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot
the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
Further Advice About Wood Furniture Care
Please protect your outdoor furniture with a cover when not in use since long-
term sunlight exposure will result in the damage on the surface.
In addition to sunlight damage, wood and metal frame suffers when exposed to
extremes in temperature and humidity.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.