lytmi LPA10R LED Light Bar User Manual
- June 8, 2024
- lytmi
Table of Contents
lytmi LPA10R LED Light Bar
Introduction
- lmmersive lighting synchroniw tion
- Numerous scenes modes with RGB light ing
- Flexible & Friendly inslallalion: Slanding / Back Slickin!J
- Adjustable Color temperature: 2700K-6500K 1/./hite warm light with odJust1lble colour temperature * (adjust in PC Software & APP)
- Multiple control methods: Support APP and •Lytmi St;;ition” Desktop APP
- Smart Calibration: Select the posit ion you want to sync with the screen via the IIPP.
What’s in the box
- Lighl Rar 2
- Adapter 1
- DC Connector Cable 1
- Fixing Brackets 4
- Holder 2
- Stickers 4
- User Manuel 1
Specifications
- Brand Lytmi
- Model LPA10R
- LED Color RGBCW
- LED Color Temperature 2700K-6500K
- Max Voltage D DC12V
- Max Current 3A
- Working Temperature O’C-40’C
- Light Bar Dimension 46mm35mm350mm(LWH)
Overview
INSTALLATION
ways for Light Bars Position
- A. Use the holder the fix the light bar, then place it wherever you want.
- B. There are 2 types of fixing brackets tO clip the light bar on the wall or the back of the TV.
RESET THE LIGHT
- Remove the device from the APP manually. Tap in the “Smart TV light bar”, and remove it.
- Turn the device ON-OFF-ON-OFF-ON until the light blinks or breathes. (Each time ON should be in 2-5s)
CONTROL THE LIGHT
By the APP
- Download Lytmi APP.
- Make sure your WIFI is under 2.4Ghz; Turn on Bluetooth and GPS/Location on your phone.
- On the APP, register and log in. The APP will detect the “Smart TV light bar” automatically. Tap and add it.
- Tap setting -> Synchronize to customize the sync mode (NEO HDMI 2.0 sync box standard edition or Lytmi Station Desktop APP required)
- Tap Scene to select/change the mode and enjoy!
Voice Control
- Support Voice Assistant like: Alexa, Google Assistant and Smart Things.
By “Lytmi Station” Desktop APP
Download the software on our offhcial website: https://ilytmi.com/ (Only
supports WIN10 above)
notice
The sync mode requires Neo HDMI2.0 sync box standard edition or PC Screen
Strip Light; It also requires HDMI Sync Box or Lytmi Station Desktop APP in
the same WIFI router.
Troubleshooting
Cannot connect with Lytmi APP
- A. Make sure the light is well connected and powered on.
- B. Make sure the Bluetooth, GPS is on and your WIFl is under 2.4Ghz.
- C. Make sure the distance between the controller and the phone less thn 1 meter while connecting.
- D. Re-power on the strip and re-tun the Bluetooth in your phorne to try again.
Cannot use the sync mode.
Please make sure you have Neo HDMI2.0 sync box standard edition or Lytmi
Station Desktop APP for the sync mode.
The lights do not work.
Pull out each connective part, re-connect and re-power them. f you have any
problem about the item or something is unfounded in the paockage, feel free to
contact us.
Our email: support@ilytmi.com
Customer Service
- Warranty: 12-Month Limited Warranty
- Support: Lifetime Technical Support
- Email: support@ilytmi.com
- Offhcial website: www.ilytmi.com
- Facebook@Lytmi
- YouTube@Lytmi
- Tiktok@lytmi
- Instagram@lytmioffhicial
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>