Style SELECTIONS 070469 Traditional Porch Swing Instruction Manual
- June 9, 2024
- Style SELECTIONS
Table of Contents
STYLE SELECTIONS® is a registered trademark of LF, LLC.
All Rights Reserved.
** ITEMS #1096973
TRADITIONAL PORCH SWING
MODEL #070469
ATTACH YOUR RECEIPT HERE**
PRODUCT SPECIFICATIONS
SPECIFICATIONS
48in w x 17.7in h x 23.6 in D
Cedar construction
400 lb. maximum weight capacity
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Swing Seat Base | 1 |
| B | Left Armrest | 1 |
| C | Right Armrest | 1 |
| D | Front Arm Block | 2 |
| E | Backrest | 1 |
| F | Y Chain | 2 |
| G | Large Eye Bolt – 314mm | 2 |
HARDWARE CONTENTS (shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
IMPORTANT INFORMATION
The swing must be attached to porch framing, not just to the soffit or ceiling
boards. Due to varied structural layouts of porches, it will be necessary for
you to purchase hanging hardware to meet your structure requirements (chains &
carabiners provided). We strongly encourage you to evaluate structure, create
a plan, and purchase appropriate hardware before assembling the swing.
Consulting a carpentry professional may be appropriate if you don’t believe
that the project is within your scope, so as to insure the correct hanging and
safe use of the product.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 1 Hour
Additional time to install hangers on porch or structure modifications.
Tools Required for Assembly (not included): 10mm & 13mm wrench or socket and
ratchet
Helpful Tools (not included): power drill/driver may be needed when mounting
hardware to structural lumber
ASSEMBLY INSTRUCTIONS
-
Start by attaching the backrest to seat base. Align the holes in the backrest and the seat base. Insert a bolt in from each side and secure with nuts and washers. Do not fully tighten hardware at this stage. Parts need to be movable.
Hardware Used -
Next, add the armrests. Secure in place by inserting the short eye bolts through the side of the armrest, through the holes in the backrest. Use a nut and washer to secure. Do not fully tighten hardware.
Hardware Used -
Add the arm blocks under the front of the armrests. Then, insert large eye hooks down through the armrests and through the holes in the seat base. Secure with nuts with washers. Tighten all hardware that has been installed in steps 1-3. Hardware Used
-
Layout chains in inverted “Y” shape as shown. Identify the front and rear legs of the chain by locating the leg with 21 links(front) and 19 links (rear).
-
Hanging porch swing Attach chains to eye bolts with carabiners. Be sure to have chains in correct direction. Hang chair from hooks or roof structure. Additional carabiners provided may be used to attach chain to hooks or structure. Hanging points should be equal to the width of the chain legs (46in) and up to 12in wider than that measurement (58in). Chains may need to be cut or shortened for your application.
Additional hardware not included.
Hardware Used
CARE AND MAINTENANCE
- Wash with soap and water with a sponge or medium stiff brush
- For extra protection, Apply waterproof wood sealer with a paintbrush or sprayer every 3 to 5 years
WARRANTY
1-Year Limited Warranty
Serial Number…………………….
Purchase Date……………………..
Questions, problems, missing parts?
Before returning to your retailer, call our customer
service department at (877)888-8225, 8 a.m. – 8 p.m.,
EST, Monday – Sunday.
You could also contact us at
partsplus@lowes.com.
SC22321
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>