TURTLE BEACH TBS-0285-01 Ear Force Headset Audio Controller User Guide
- June 9, 2024
- TURTLE BEACH
Table of Contents
TURTLE BEACH TBS-0285-01 Ear Force Headset Audio Controller
Package Contents
Ear Force Headset Audio Controller Plus
- Short Press = Mute*/Unmute
- Long Press = Mic Monitor Off/Low/High
Game Presets
- Natural Sound
- Bass Boost
- Bass and Treble Boost
- Voice Enhancer
Microphone Presets
- Quiet Room
- Normal Room
- Loud Room
- LEDs pulse when features are active
- using the Loud Room Preset can cause Mic Drop-outs when used in a quiet environment. Always match your Mic Preset to the noise level of your surroundings.
The Headset Audio Controller was designed to fit tightly into the Xbox One
controller. You may need to apply gentle upward pressure to the bottom of the
audio adapter while inserting into the controller. If it does not connect
easily, do not force it. Make sure the Audio Controller is well aligned (do
not angle the Audio Controller) and try again.
To remove the Audio Controller, apply gentle downward pressure to disengage the tab on the bottom of the controller.
Xbox One Setup
- Follow the on-screen prompts to update your controller.
- Take this time to update additional controllers if necessary.
Compliance
Regull1ory Complilnut StewmentJ; for the Ear Force Hffdtet Audio Controller Plus
Fedenl Communication, Commission (FCC) CompUance Notice
Class B Interference Statement: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15,
Subpart B of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Canadian ICES Statements:
Canadian Department of Communications Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio-noise
emissions from a digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications. This Class B digital
apparatus complies with Canadian ICES-003.
Declaration of Conformity
Marking by this symbol:
Indicates compliance with the Essential Requirements of the EMC Directive
of the European Union (2004/108/EC).
This equipment meets the following conformance standards:
Safety:
EN 60950-1:2006+ A11 + A1 + A12 (T-Mark License] Also Licensed for Standards:
IEC 60950-1: 2005+ A1:2009, (CB Scheme Report/Certificate, UL60950-1 (NRTL
License), CSA22.2, 60950-1 (SCC License).
Additional licenses are issued for specific countries and are available on request.
- Emissions: EN 55022: 2010, 2003 CISPR 22: 2008.
- Immunity: EN 61000-4-2: (2008-12), EN 61000-4-3: (2010-04): 12009-09). The products are licensed, as required, for additional country-specific standards for the International Marketplace. Additional issued licenses are available upon request.
- Environmental: Low Voltage Directive 2006/95/EC, RoHS 2011/65/EU, REACH 2006/1907/EC, WEEE 2002/96/EC, Packaging 94/62/EC
Warning!
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case, the user may be required to take
appropriate measures.
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling. please contact your local authority, or where you purchased your product.
WARRANTY SERVICE FOR PURCHASES IN AUSTRALIA
Voyetra Turtle Beach, Inc. (“VTB”) warrants to the original end-user purchaser (“Purchaser”) that the retail Turtle Beach hardware product herein (“Product”] will be free of defects in materials and workmanship for a period of one year from the date of purchase by the Purchaser (“Warranty Period”).
If a defect should occur during the Warranty Period in Australia, the following procedures apply:
To make a warranty claim, Purchaser should contact VTB’s Australian distributor whose contact details are as follows:
QV SOFTWARE INTERNATIONAL LTD
- PO Box 6567, Silverwater NSW, 2128 Australia
- Phone: +61 2 9748 2555
- E-mail: tbsupportldqvsoftware.com.au.
QV is responsible for servicing warranty claims for purchases made in Australia. The purchaser will bear the expense of sending the Product back to the Australian distributor to claim the Warranty.
Our goods come with guarantees, in addition to this Warranty, that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. To the fullest extent permitted by law VTB’s liability under this Warranty and any other statutory guarantees imposed at law is expressly limited to the replacement of the Product or the supply of equivalent Product, the payment of the cost of replacing the Product or of acquiring an equivalent product, or the repair of the Product or payment of the cost of having the Product repaired, at the discretion of VTB.
VTB is the maker of this warranty.
VTB’s contact details are:
Voyetra Turtle Beach, Inc.
100 Summit Lake, Drive Suite 100
Valhalla, NY 10595 United States
Phone: 914.345.2255
E-mail: supportdturtlebeach.com.
This warranty does not apply to any Product that has had its serial number altered, removed, or defaced, or any Product damage caused by shipping, improper storage, accident, problems with electrical power, abuse, misuse, neglect, ordinary wear, acts of God (e.g. flood), failure to follow directions, improper maintenance, use not in accordance with product instructions, unauthorized modification or service of the Product or damage resulting from the use of the Product with hardware, software or other products not provided by or specifically recommended by VTB.
2014, Voyetra Turtle Beach, Inc. (VTB). All rights reserved. No part of this document may be reproduced without permission. Turtle Beach and the Turtle Beach logo are registered trademarks of VTB.
For Additional Product Information Visit:
www.TurtleBeach.com/hacplus.
For US Warranty Information Visit:
www.TurtleBeach.com/warranty.