COSTWAY HY10019 Children Bed User Manual
- June 4, 2024
- COSTWAY
Table of Contents
COSTWAY HY10019 Children Bed
Before You Start
Please read all instructions carefully and keep it for future reference.
General Security Warning
Caution: The Product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product away
from babies and children, otherwise they may pose a choking hazard.
Danger: Lack of attachment may cause a risk of tipping.
Warning for Assembly
-
Assembled only by adults
-
Remove all Packaging, separate and count all parts and hardware.
-
Read through each step carefully and follow the proper order.
-
We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during installation, and place the product always on a flat, steady and stable surface. -
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE
Due to the presence of small parts during assembly, keep out of reach of children until assembly is completed.
CAUTION
-
DO NOT use this bed without a mattress.
Infants who cannot get in and out of a bed without help can be trapped between a mattress and a wall and suffocate. NEVER place infants in the bed without guardrails in place. -
NEVER use bed for children under 3 years.
-
Never place bed near windows where cords from blinds or drapes may strangle a child.
-
Do not place items with a string, cord, or ribbon around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a child’s bed for any reason.
PARTS
ASSEMBLY INSTRUCTION
Attach the legs (D) to headboard (A) and footboard (B), fasten
completely.
Align side boards (F) with wooden center leg(C), fasten with washers (K), and
screws (P).
Align brackets (M) to the end of sideboards (F) , and fasten with washers (K)
and screws (J). 
-
Align assembled side frame to headboard (A), and attach with washers (K) and screws (J).
Do not tighten screws completely. -
Align assembled side frames to footboard (B), and attach with washers (K) and screws( J ).
Tighten all screws for steps 3 and 4.
Fasten wooden support(H) to the mattress support(E) with screws (N) by
household screwdriver.
Place the assembled mattress support on the bed frame. Ensure the middle slat
and end slats next to the headboard and footboard are tightened with screw
(L).
Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first. Replacements
for missing or damaged parts will be shipped ASAP !
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>