ASHLEY B095-772 Furniture Vintasso Full Upholstered Platform Bed Instruction Manual
- June 9, 2024
- Ashley
Table of Contents
B095-772 Furniture Vintasso Full Upholstered Platform Bed
Instruction Manual
B095-772 Furniture Vintasso Full Upholstered Platform Bed
IMPORTANT SAFETY NOTICE: READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Be sure to check all packing materials carefully for small parts may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- Some assembly may involve attaching glass or rnirrors. Be very careful handling the glass or mirrors, as severe injury may result if the gloss or mirror breaks. Never handle large pieces of glass or rnirrors by yourself.
- When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves—use a step ladder.
- Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
- Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR
DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY
INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN
THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
NOTE: ALL PARTS REQUIRED FOR ASSEMBLY OF THIS BED ARE PACKED IN THE OPEN
SPACE IN THE BACK OF THE HEADBOARD PANEL. NOTE: UNIT SHOULD BE ASSEMBLED
BY TWO OR MORE PEOPLE. DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN
STARTED!
NOTE: HARDWARE ARE STORED INSIDE THE BOX AS BELOW THE PARTS ARE LOCATED
INSIDE THE BOX AS BELOW Turn Adjustable Leveler on the bottom of the
Cross—Slat Support Leg leaving 6mm space between leveler and the floor.
NOTE: Always disassemble the bed prior to moving to a new location.
RTAParts@ashleyfurniture.com
www.ashleyfurniture.parts
1-844-966-0809
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>