ACEFAST D7 Car Mount Magnetic Holder User Manual

: June 9, 2024
: ACEFAST

Table of Contents

ACEFAST D7 Car Mount Magnetic Holder
Product Diagram
Specifications
Getting Started
Product Care & Use
Warranty Conditions
EU Declaration of Conformity
WEEE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ACEFAST D7 Car Mount Magnetic Holder

ACEFAST-D70-Car-Mount-Magnetic-Holder-PRODUCT

Dear customer, Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Product Diagram

ACEFAST-D70-Car-Mount-Magnetic-Holder-FIG-1

Specifications

Model D7
Size
- Magnetic pad size : 110 x 68.5 x 52.5 mm / 4.33 x 2.70 x 2.06 in
- Center console holder size : 167 x 72.5 x 40 mm / 6.57 x 2.85 x 1.57 in
- Air outlet clip size : 94 x 45 x 37 mm / 3.70 x 1.77 x 1.45 in
Weight Total weight of the product is about 190g / 6.70oz
Material ABS, silicone, hardware

Getting Started

A sticker base is included for use on leather or uneven surfaces. The mount itself can be adhered to the sticker base and more easily removed at a later time for use in another placeor vehicle. If reusing the mount in this way, you can slightly dampen the adhesive surface of the mount to renew stickiness before re applying.

Clean a preferably flat surface on your dashboard where you want to install the mountwith a mixture of equal parts (1:1) isopropyl alcohol and water. Let the surface dry.
If you want to attach the mount directly to the surface, skip this step. Otherwise, carefully peel off the sticker base backing paper and adhere the base to the surface. Press down firmly and hold for a few minutes to ensure tight adhesion. For best results, allow 24 hours or the adhesive to securely bond with the surface. Then remove the plastic film from the top side.
Lift the mount locking lever up towards the mount arm. Carefully peel off the mount base adhesive backing paper and adhere the mount to the sticker base (or directly to the surface if not using the sticker base). Press down firmly, hold while pushing the mount locking lever back down again, and continue to hold down for a few minutes to ensure tight adhesion. For best results, allow 24 hours for the adhesive to securely bond with the surface before using the mount.
Paste a round metal plate (for small phones) or a rectangular metal plate (for large phones) between the phone and the phone case (if necessary, please paste it on the phone case). If you do not use the protective case, please paste it on the back of the phone directly (you can paste the electrostatic sticker on the back of the phone first, and then paste the metal plate on the electrostatic sticker).
Put your phone on the car holder so that it has a magnetic connection

Air outlet clip : thanks to the design, it can be easily locked within 1 turn. Insert and rotate with one hand, easy to install and remove in one step.

Insert the blade into the clamp, insert it to the end, (turn clockwise) and lock it tightly.
It can be easily taken out by turning it to the end (counterclockwise rotation).

Product Care & Use

Don’t install the mount in front of the airbags.
The temperature, pressure, type & cleanness of the surface all affect the time the adhesive takes to bond.
The adhesive is designed for permanent adhesion. If you want to remove the sticker base from your car dashboard in the future, warm with a hair dryer and use a controlled prying & twisting action while holding the surface down. A sawing action with ordinary dental floss to cut through the adhesive layer can also work well. Alternatively, use dedicated adhesive removal products.
If the mount eventually comes unstuck from the sticker base, you can try slightly dampening the adhesive surface of the mount to renew stickiness before reapplying to the sticker base or directly to the surface.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:

Importer : Alza.cz a.s.
Registered office : Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN : 27082440

Subject of the declaration:
Title: Mobile phone holder Model / Type: Acefast- D7 The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s): Directive No. 2014/53/EU Directive No. 2011/65/EU as amended 2015/863/EU Prague, 8.3. 2022

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz