MARVO Fit Pro G1W Wireless Gaming and Office Mouse User Manual

June 9, 2024
MARVO

MARVO Fit Pro G1W Wireless Gaming and Office Mouse

MARVO-Fit-Pro-G1W-Wireless-Gaming-and-Office-Mouse-PRO

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. Please contact the customer line if you have any questions or comments about the device.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer  Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Product Presentation

Features

  • Ergonomic design, two sizes of shell for different hand types, a variety of colors with a unique fashion
  • Nearly 16.8 million color palettes with 7 different lighting modes
  • Wired, 2.4G, Wireless three modes, 600mAh high-capacity battery, stable performance, low power consumption, long battery life

Technical Specifications

Sensor PAW3370
Buttons 7
Operating Distance 10 m
Connection modes wired, 2.4G, Wireless 5.1 (Supportable protocols)
DPI (wired & 2.4G) 1600-2400-3200-6400- 12000-19000
DPI (Wireless) 800-1200-1600-2400
Switch rating: 50 million clicks
Backlight RGB (no light in Wireless status)
Polling rate 1000 Hz (wired & 2.4G)
Polling rate 125 Hz (wireless)
Battery specifications 3.7V-600mAh
Charging time 3 h
Size (small shell) 11060.540.5 mm
Size (big shell) 126.563.540.5 mm
Weight 107g (big shell)

System Requirements

Wired and 2.4G mode support WIN 7/WIN 8/WIN 10/WIN 11/MAC OS 10.12 or above/iOS 13.6 or above/Android 6.0 or above; Wireless mode supports WIN 7/WIN 8/WIN 10/WIN 11/MAC OS 10.12 or above/iOS 13.6 or above/ Android 6.0 or above .MARVO-Fit-Pro-G1W-Wireless-Gaming-and-Office-Mouse-1

  • BT&2.4G Wired
  • Replaceable Grips
  • Pixart 3370 Sensors
  • Max DPI 19000
  • Omron Switch
  • PTFE Mouse Feet

Safety Notes

  • Keep the equipment dry. Keep away from precipitation, humidity, all types of liquids and condensation.
  • Do not use the product with wet hands.
  • Do not use or store the equipment in dusty or dirty areas.
  • Do not store the equipment under high-temperature or low-temperature conditions (this may damage it).
  • Do not drop, knock, or shake the equipment as it may damage it.

Installation

Connect the mouse to an available USB port on your computer. When connecting for the first time, wait 15 seconds until the generic driver is installed.

For advanced mouse configuration, please download and install the specialized driver at www.marvo-tech.com (an Internet connection is required):

  • download the driver and double-click the executable file
  • follow the on-screen instructions and install the application
  • after installing the application successfully, an icon will be displayed in the taskbar
  • double-click this icon to launch the application

Note: driver custom macro definition only supports WIN system installation; Wireless status does not support driver and light adjustment.

Use

  1. Press the buttons below the scroll wheel to change the sensitivity according to predefined DPI steps.
  2. Power switch: toggle backward to turn off all power, toggle forward to open the running light and mouse switch, toggle to the middle to close the running light.
  3. 2.4G & Wireless mode switch button: the light at the scroll wheel is green for 2.4G mode, blue for Wireless mode. In Wireless mode, press and hold the switch button for more than 3s, the blue light flashes for Wireless pair code.
  4. 2.4G pairing code: software to code, pressing the left, middle and right three keys at the same time, insert the receiver, until the code success.
  5. Wireless name: MARVO Z Fit Pro.
  6. Indicator light description.

LOGO light and scroll wheel light: when no receiver is inserted, the light effect is flashing, when the receiver is inserted, the light effect is corresponding to the DPI color. The yellow light flashes when charging, the DPI light is always on when full, and the red-light flashes when the power low (RGB light automatically turns off in low power state).MARVO-Fit-Pro-G1W-
Wireless-Gaming-and-Office-Mouse-3

Troubleshooting

In case of incorrect operation follow the steps below:

  • Check the integrity of the connectors.
  • Check the connection to the computer.
  • Check your computer settings.
  • Disconnect and reconnect the equipment; restart the computer.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This product complies with the essential requirements of Directives 2014/30/EU and 2011/65/EU including amendments 2015/863/EU.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

MARVO User Manuals

Related Manuals