MARVO MH01 Headset and Mouse Gaming Combo User Guide
- June 5, 2024
- MARVO
Table of Contents
MH01 Headset and Mouse Gaming Combo
User Guide
MH01
HEADSET & MOUSE GAMING COMBO
TECH SPECS
Headset Specs:
Sound: stereo
Frequency response: 20 Hz – 20 KHz
Speaker size: 50 mm
Speaker impedance: 320-± 15%
Speaker sensitivity:120 dB ± 3 dB
Microphone type: omnidirectional
Microphone sensitivity: -38 dB ± 3 dB
Microphone size: 4×1.5 mm
Backlight: Rainbow
Connectors: 2x 3.5 mm jack, USB (for LED light)| Cable length: 2.0 m
Mouse Specs:
Sensor: Optical
DPI: 800-1600-2400-3200- 4800-6400 (default)
Buttons: 6 (programmable)
Switch rating: 3 million clicks
Backlight: RGB
Interface: USB 2.0
Cable length:1.5 m
Weight: 76 grams
Size: 125 x 64 x 40 mm
---|---
PRODUCT PRESENTATION
1. FEATURES
Headset features:
– Closed, over-ear design for powerful bass sounds
– Soft-cushioned leather ear cups
– Built-in volume controller
Mouse features:
– Ultra-lightweight, as low as 76 grams, thanks to a special perforated-
honeycomb chassis design.
– RGB backlight with multiple selectable lighting schemes – Advanced
customization software
2. SYSTEM REQUIREMENTS
PC system or compatible with the installed sound card, two USB ports available; Windows 7 or newer operating system.
SAFETY NOTES
-To prevent possible hearing problems, do not use the headphones at high volume for long periods of time.
– Keep the equipment dry. Keep away from precipitation, humidity, all types of
liquids, and condensation.
– Do not use the product with wet hands.
– Do not use or store the equipment in dusty or dirty areas.
– Do not store the equipment under high-temperature or low-temperature
conditions (this may damage it).
– Do not drop, knock or shake the equipment (use may result in breakage).
INSTALLATION
Each headphone audio jack is colored differently (green for headphones, pink
for microphone) or has an icon on it. Connect each jack to the matching input
on the sound card. Insert the USB connector into a USB port on your computer.
Connect the mouse to the available USB port on your computer and wait approx.
15 seconds until the generic driver is installed.
NOTE: The headset does not have a specialized driver and does not require
one for proper operation and functionality.
For advanced mouse configuration, please download and install the specialized
driver at www. Marvo-tech.HK (an Internet
connection is required):
– download the driver and double-click the executable file;
– follow the on-screen instructions and install the application;
– after installing the application successfully, an icon will be displayed in
the taskbar;
– double-click this icon to launch the application.
USE
Headset:
Use the knob on the headset to control the volume.
Mouse:
Press the buttons below the scroll wheel to change the sensitivity according
to predefined DPI steps.
MOUSE DRIVER USE
Key Setting Select the “mode Kor “Mode B” tab and set the user-defined function of each key as following graph. 1 for Left Click, 2 for Right Click, 3 for Mid click, 4 for forward, 5 for backward, and 6 for DPI Loop is kept as default.
One-click the key you want to set then chose a new function. Click “Apply” to
save the setting.
Advanced Setting
Select the “Advanced” tab and set Fire key Setting/Moving Speed/Double click
second/Rolling speed/DPI setting functions as the following graph. Click
“Apply” to save the setting.
DIP Setting
The default DPI: is 800-1600-2400-3200-4800-6400, you can set the DPI from
800-6400. Click ‘Apply” to save the setting.
User define color
Double click the color label, and choose the color you want. Click “Apply” to
save the setting.
Light Setting
Select the “LED” tab and set LED status/LED brightness/LED mode/Breathing
speed functions as following graph. Click “Apply” to save the setting.
Macro Setting
Macro management can record any keys on the keyboard, the time of keys
reaction, and the number of keys cycles. Click New macro” to create a new
file, Such aS a, b, c Select whether to increase the delay and the times of
cycles.
Click ‘start recording” and start recording any keys on the keyboard. The keys
you recorded will display in the macro edit box
After the recording, click “start recording”.
To revise the recording content, please make the following changes in the
macro options:
Choose to insert the event: insert relevant content in the selected location
After the recording is completed, just exit the macro recording interface, no
need to click the confirmation keys. Execute a macro, such as a mouse button
“4” key set to “macro functions’, after recording is complete, press the mouse
‘4’ key to play the recorded content.
TROUBLESHOOTING
In case of incorrect operation follow the steps below: – Check the integrity of the connectors; – check the connection to the computer; – Check your computer settings; – Disconnect and reconnect the equipment; restart the computer. If the problem persists, please contact your local seller.
GENERAL INFORMATION
– Unauthorized repairs or disassembly of the product will void the warranty
and may cause its damage.
– This product is safe and complies with Eli’s requirements.
– This product is manufactured conforming to the European RoHS standard. This
standard was introduced to reduce the amount of electrical and electronic
waste emitted into the atmosphere.
– Using the WEEE symbol (the crossed-out bin) indicates that the electrical
and electronic equipment inside the package can be recycled. When recycling
waste properly, you protect the environment and people’s health. Segregated
household waste collection, aids recycle materials and components used for the
production of this device. For detailed information about recycling, please
contact your retailer or local authority.
Warranty card
Product Model:…………………
Product Serial No:……………………….
Date of Purchase:………………….
Customer Name:………………….
TEL:……………………..
Address:…………………..
Distributor Name:…………………..
TEL:…………………………………..
A warranty Card is an important certificate for the after-sale service of
Marvo products, Please keep it appropriately.
|
---|---
https://www.facebook.com/Shenzhenmarvotechnology/| http://www.marvo-
tech.com