Ratikon HS-QX-013 Roller Trainer User Manual

: June 9, 2024
: Ratikon

Table of Contents

Installation Method
Warranty Conditions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ratikon HS-QX-013 Roller Trainer User Manual

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

PRODUCT INSTRUCTION

Installation Method

Install (B) to (A). Combine (A) and (B) together. Fix it with (E).
Install pulley. Install the pulley with the deadlock switch to both ends of the base (A). Install it (without locking) to the middle position of (A).
Install (C) to (B). Align the interface of tray (C) with (B). Press down on the top position, then fix it with screws.
Height adjustment function. Press the “Adjust height” buttons at the same time.

USING OVERVIEW

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.