SEVERIN PG 8139 Electric Grill Instruction Manual

SEVERIN PG 8139 Electric Grill

INSTRUCTIONS FOR USE

Stand grill / Table grill
Dear customer, Please read the following instructions carefully before using the appliance and keep this manual for future reference. The appliance may only be used by persons familiar with this manual.

DESCRIPTION

1. Grill grate, 2 parts

2. Heating element with cable connection

3. Rotary controller with display and light ring

4. Power cord with plug

5. Reflector inserts

6. Reflector

7. Grill cover with cover

8. Core thermometer, 2 pieces

9. Cable connection for core thermometer (on both sides)
   Models with stand:

10. Side storage tables, 2 pieces

11. Grill cart frame

12. Support legs on the side of the wheels, 2 pieces

13. Wheels with wheel axles, 2 pieces each

14. Frame for storage rack

15. Support legs, 2 pieces

16. Storage rack

Not shown : 8 large bolts, 4 small bolts with nut 2, wheel covers 2 cotter pins

Important safety instructions

• The consumer should only be connected to an earthing socket installed in accordance with regulations.
• The consumer is also intended for outdoor use, and therefore must be operated with an additional current protector with a rated tripping current not exceeding 30 mA.
• Make sure that the supply voltage corresponds to the voltage indicated on the nameplate.
• The power cord should be checked regularly for signs of damage.
• If such damage is detected, the consumer must not be used any further.
• In order to avoid danger and to meet safety requirements, repairs to this electrical appliance or its power cable must be carried out by our customer service. In case of repair, please contact our customer department by phone or e-mail (see attachment).

Warning : This symbol indicates that the grill grate and the heating element can become very hot during operation – there is a risk of burns.

• Before cleaning the grill, make sure it is unplugged and has cooled down completely.
• To avoid the risk of electric shock, the heating element with sensor and power cable and the thermometer in the core must not be immersed in or come into contact with liquid.
• Clean the grill grate, reflective plate and tray inserts with hot soapy water or in the dishwasher. Detailed information on cleaning the appliance can be found in the Cleaning and care section.
• The appliance is not designed to be controlled by an external timer or a separate remote control system.
• Warning! Do not under any circumstances use charcoal or other solid or liquid fuels to operate the grill.
• Warning : Do not cover the grill grate with aluminum foil, grill pans or other objects, as the resulting heat build-up could seriously damage the grill.
• A maximum of 2 liters of water can be poured into the reflector bowl.
• This appliance is intended for domestic or similar uses such as
  • in staff kitchens, shops, offices and other similar work environments,
  • in agricultural work environments,
  • customers in hotels, motels, etc. and similar establishments
• This appliance can be used by children (over 8 years) and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are supervised or instructed in the use of the appliance and fully understand all associated hazards and safety precautions.
• Children must not be allowed to play with the appliance.
• Children must not carry out any cleaning or maintenance of the appliance unless they are under supervision and are over 8 years old.
• The appliance and its power cable must be kept out of the reach of children under 8 at all times.
• Warning : Keep all packaging materials out of the reach of children – they are a potential source of danger, e.g. suffocation.
• Before using the appliance, the main body and all installed accessories should be thoroughly checked for defects. If, for example, the appliance falls on a hard surface, it must not be used any further: even invisible damage can have an adverse effect on the operational safety of the appliance.
• During operation, the grill must be placed on a flat, heat-resistant surface that is resistant to splashes and stains. When grilling food with a high fat or moisture content, it is not always possible to prevent splatter.
• Do not place the grill against a wall or corner and ensure that no flammable materials are stored near it.
• Remember that foods with a high fat or moisture content may tend to catch fire; therefore, always fill the reflector bowl with water before use. Do not connect the grill to the mains until the hot plate is filled with water. Water helps cool the baffle, reduces smoke build-up and also makes cleaning easier.
• Continuously monitor the water level. Water should be topped up in a timely manner, ensuring that it does not come into contact with the heating element.

Warning: Unplug the grill before adding water.

• Before using the grill, always check that the heating element is correctly fitted in the cover and the reflector plate.
• The grill must be supervised at all times during operation.
• Do not allow the power cord to touch hot parts of the appliance.
• Route the power cord so that no one can trip over it.
• Always remove the plug from the outlet
  • before filling with water
  • after use
  • in case of any malfunction
  • during cleaning
• The use of an extension cable or a winch causes a loss of energy, possibly associated with the subsequent heating of the cable. Therefore, the cable must be completely unfolded before use. Make sure the cable is approved for outdoor use and for the specified power (see nameplate).
• Do not move the grill trolley by pushing on the side table. First remove the side table and always grasp the frame.
• Do not use the barbecue trolley to transport any objects.
• Never move the grill while it is in use.
• Remove water after use.
• Attention! Always make sure the grill has cooled completely before moving, cleaning, covering or storing it
• Attention! Whenever the grill is not in use, the heating element with cable connection must be removed from the grill and stored in a dry place inside.
• Do not store other parts of the grill outside or in an open area where they could be affected by the weather.
• The grill can only be used with the supplied thermometer or the spare SEVERIN ZB 8126 thermometer.
• We assume no responsibility for damages caused by improper use or failure to follow these instructions.
• This product complies with all mandatory CE marking directives.

Before first use

• Remove all packaging materials and stickers from the appliance.
• Clean the grill grate, the reflector container and the insert in the container with warm soapy water; then wipe thoroughly dry.
• Assemble the appliance as described in Unit Preparation.
• Let the grill heat up for approximately 10 minutes at maximum power without food (see ‘Boost-zone’ grilling). This will eliminate the smell that usually occurs when the grill is first turned on. A little smoke may escape; for this reason, sufficient ventilation should be ensured by opening windows or balcony doors; a hood is also suitable.

Installation of the grill

• Assemble the grill as shown in the pictures:
• Place the reflector container in the grill cover.
• Note : Install the tray inserts so that each insert covers all corners.
• Place the heating element with the cable connection in the reflector container. The appliance is equipped with a safety switch. The unit can only be operated with a properly installed junction box.
• Fit both elements of the grill grate so that the protrusions on the grate fit into the corresponding holes in the reflector container.

Assembly of the barbecue trolley

• For grill models with a grill cart, assemble the cart as shown.
• A Phillips screwdriver is required for assembly.
• Before assembly, check that all parts are complete as shown in the picture above.

Construction:

• Place the frame of the barbecue cart upside down on the floor. · Insert the four support legs into the housing and secure each support leg with two large screws. Two support legs with additional wheel holes must be mounted together on the narrow side of the grill cart.
• Turn the frame with the support legs upright.
• Fit the plastic frame of the storage rack and secure it on all four support legs with the appropriate screws and nuts; then install the storage rack.
• Pass the wheel axles through the holes on the support legs and fit the wheels. Secure each wheel with one of the cotter pins and snap the wheel covers into place.
• Place the side tables on the corresponding metal pins.
• Make sure the grill cart is stable. Regularly check the tight connection of the screws.
• Place the assembled grill on top.

Attention:

• Nepřekračujte maximální zatížení 3 kg pro odkládací stolky a 20 kg pro odkládací přihrádku.
• Pokud potřebujete gril přemístit, sejměte stolek na opačné straně, než jsou kolečka a uchopte rám.

Application

• Note: This is a quick guide to find out the most important basic information and learn how to start the grill using the app. Detailed and complete instructions are available on our homepage: www.severin.de-> PG 8139-> Download
• Android 8 app

App for Apple iOS 12

• Download the SEVERIN app from the Apple App Store or Google Play Store.
• Open the SEVERIN application.
• If you are a first time user, you will need to register and create a new account. If you already have an account, use your credentials to log in.
• Connect your grill to a properly installed and easily accessible grounded electrical outlet.
• Tap the + in the upper right corner and select Smart product. Then confirm with Set up.
• Now confirm the connection to the grill by pressing the display.
• Next, select your WiFi network and enter the password. Then tap on Connect.
• The appliance is now connected. When the appliance is connected, the WiFi symbol will appear on its display.
• Finally, you can choose a name for the barbecue.
• You can now use the app to control and configure your appliance.

Preparing the unit

• Assemble the appliance as described in the Grill assembly section.
• For models of grills with a grill cart, see Assembling a Grill Cart.
• Fill the reflector bowl with water up to the Max mark (max. 2 liters). Do not pour water on the heating element or its sensor.

ATTENTION!
During grilling, the water in the reflector container should be replenished in time. Warning: Always disconnect the appliance from the mains before refilling.

• Connect the appliance to the mains.
• The light ring lights up blue, the unit is ready for use.

Rotary controller
The rotary control is used to select a function or switch it off (sleep mode).

Turn:
Select Function/Temperature/Timer.

Press – short:

• Confirm selection.

Press – two seconds:
1 x: return to standby mode to change the function 2 x: return to sleep mode

Rotary controller – light ring
The light ring shows the current operating mode:

• Not lit:
  The unit is in sleep mode.

• Blue light:
  The unit is in standby mode.

• Flashes:
  The grill grate has not yet reached the selected temperature. The unit is heating up or cooling down.

• Stable:
  The selected temperature has been reached.

• Orange:
  Grilling at 80-350 °C

• Red:
  Boost-zone 330-500 °C

• Violet
  Indirect grilling at 80-200 °C

Timer

The timer is used to monitor the grilling time. Can be set from 1 min to 23 h 59 min. Audible signals indicate that the run time has expired; the heating element remains on.

• Turn the dial until it lights up.
• Briefly press the rotary control and rotate to select the hour.
• Briefly press the rotary control to set the minutes.
• Confirm the time setting by briefly pressing the controller. The colon will start flashing; a beep will sound after the time has elapsed.
• To return to standby mode, press the rotary control for two seconds.
• Alternatively, set the timer to 0:00 and briefly press the controller to return to standby mode. ∙ If you turn off the heating after setting the timer, the appliance will switch to sleep mode 5 minutes after the last setting, i.e. the timer will turn off.
• If the timer is set with heating already turned off, it will continue until the pre-selected time is reached, when the unit will go into sleep mode.

Grilling at 80-350°C

For grilling sausages, poultry, fish, etc. For seasoning or keeping steaks warm.
The entire surface of the grill is heated.

• Turn the dial until it lights up.
• Briefly press the rotary control and rotate to select 14 required temperatures. Press briefly to confirm.
• The ring starts flashing orange and the appliance is heating up.
• As soon as the selected temperature is reached, the ring lights up orange.
• Place the food on the grill surface.
• If necessary, close the cover.

Grilling in Boost-zone mode 330-500 °C

• For roasting or lightly grilling steaks.
• The boost-zone is located on the right; the left side is heated to 330 °C.
• Turn the dial until it lights up.
• Briefly press the rotary control and turn to select the desired temperature. Press briefly to confirm.
• The ring starts flashing red and the appliance is heating up.
• As soon as the selected temperature is reached, the ring shows a steady red.
• Place food on the boost zone.

Note:
Do not close the cover while grilling in the Boost zone. The Boost-zone function is automatically deactivated when the cover is closed.
For subsequent cooking, lower the temperature or move the food to the left of the grill surface.

Indirect grilling at 80-200°C

For slow cooking, e.g. roasts or large steaks that require additional cooking. This means that only the outer surface of the grilling surface is heated, creating an indirect grilling zone.

• Turn the control knob until it lights up.
• Briefly press the rotary control and turn to set the desired temperature. Confirm with a short press.
• The ring flashes purple and the appliance is heating up.
• Once it reaches the selected temperature, it lights up purple continuously.
• Place the food on the grill surface.
• Now you can close the lid if you want.

Grilling with a core thermometer

• Includes 2 pieces
  Another thermometer can be ordered under the number ZB 8126.

• Warning : Thermometers heat up during use.

Use appropriate protection, such as grill gloves.

• Insert the plugs of the thermometer into the sockets in the lower part to the left of the cable connection. To prevent the appliance from switching off, ensure that the box does not lift and remains properly connected.
• Select the desired grill function and temperature.
• Once preheating is complete and the ring is steady, insert the food.
• Push the tips of the thermometers into the center of the food.
• Use the rotary knob to set the desired core temperature and press briefly to confirm.
• The display shows the relevant current core temperature.
• When using the hood during grilling, the core thermometer cables should be routed through the cable glands on both sides of the hood.
• Once the preset core temperature is reached on one thermometer, three long beeps will sound.
• Remove the appropriate thermometer and remove the food.

Note:
The grill plate remains on even after reaching the pre-set core temperature.

Standby Mode

• To turn off the heater and return to standby mode, press the rotary control for two seconds.
• Alternatively, short press the controller, set the temperature to 00 and short press again to return to standby mode.

Sleep mode

• If the heating is off, the appliance switches to sleep mode 5 minutes after the last input.
• To switch off earlier, press the rotary control for two seconds.

After grilling

• Always unplug the appliance after grilling and let it cool down.

Cleaning and care

• Make sure the grill is thoroughly cleaned after use.
• Before cleaning the grill, make sure it is unplugged and has cooled down completely.
• Do not use metal pads or abrasive cleaning agents
• Remove the grill grate and clean it in the dishwasher or with warm soapy water. You can leave it soaked for a while to remove any lingering food residue.
• To avoid the risk of electric shock, do not clean the heating element with water or immerse it in water. The heating element with cable connection can be wiped with a slightly damp, lint-free cloth.
• Remove the reflector inserts and the container and clean them in the dishwasher or with warm soapy water. You can leave them soaked for a while to remove any lingering food residue.
• The tips of the thermometer can be wiped with a damp cloth.
• All other parts can be cleaned with a cloth soaked in soapy water and then wiped completely dry

TIP!

• You can use baking powder to clean the grill grate, reflector inserts and tray. Mix a paste of water and baking powder, apply the paste to the affected areas and leave it on for a while. Clean with a soft brush/sponge and then rinse thoroughly.
• For difficult-to-remove residues, the grill grate can first be cleaned by firing: heat the grill to 320 °C, close the lid and wait a few minutes.

Technical data

• Input voltage : 230 V ~ / 50 Hz
• Power: 3000W
• Frequency band : 2.4 GHz
• Maximum output power : <100mW

Disposal

Devices marked with this symbol must be disposed of separately from household waste as they contain valuable materials that can be recycled. Proper disposal protects the environment and human health. Your local authority or dealer can provide you with information on this matter.

Declaration of Conformity

SEVERIN Elektrogeräte GmbH hereby declares that the radio equipment type [PG 8139] complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available on our homepage: www.severin.de-> PG8139-> Download

Guarantee

This product is warranted against defects in materials and workmanship for a period of two years from the date of purchase. Under this warranty, the manufacturer agrees to repair or replace any parts found to be defective, provided the product is returned to one of our authorized service centers. This warranty is only valid if the appliance has been used in accordance with the instructions and provided that it has not been modified, repaired or tampered with by an unauthorized person or damaged by improper use.
Of course, this warranty does not cover wear and tear or breakable items such as glass and ceramic items, light bulbs, etc. This warranty does not affect your statutory rights or any statutory rights you have as a consumer under applicable national laws governing the purchase of goods. . If the product stops working and you need to return it, please package it carefully and include your name and address and the reason for the return. If it is within the warranty period, also present the warranty card and proof of purchase.

References

• SEVERIN Onlineshop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>