Cue Health AIIN9000207-2 4.0 Artwork Monitoring System User Guide

Cue Health AIIN9000207-2 4.0 Artwork Monitoring System

Set Up Your Cue Account

Download the Cue Health App from the Apple App® Store® or Google Play Store™ to your mobile smart device. Go to www.cuehealth.com for a list of compatible devices. Follow the on-screen instructions to create your account and pair your Cue Cartridge Reader to your mobile smart device.

Connect Cartridge Reader to power

When prompted on the Cue Health App, connect your Cartridge Reader directly to power using the supplied Cue Power Adapter and USB Charging Cable.

Find Cartridge Reader QR code

Rotate your Cartridge Reader upside-down so the bottom of the Cartridge Reader is facing up and the QR code is visible to you. The QR code is located on the bottom of the Cartridge Reader.

Pair Cartridge Reader to mobile device

When prompted on the Cue Health App, adjust the camera so the QR code is visible on-screen and inside of the capture outline. When the QR code is recognized, the Cartridge Reader is paired securely to the mobile smart device.

Cue Cartridge Reader is ready to use

To begin using the Cartridge Reader to run tests, open the Cue Health App and follow the on-screen instructions.

Welcome
This guide will help you get started using the Cue Health Monitoring System and the Cue Health Mobile App (Cue Health App).

Get Started
See opposite page for instructions on downloading the Cue Health App, creating your Cue Account, and setting up your Cue Cartridge Reader.

Questions
Dial (833) CUE-TEST · 833-283-8378
Cue and the Cue logo are registered trademarks of Cue Health Inc.
Apple and App Store are registered trademarks of Apple Inc.
Google Play is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Cue is under license. Other trademarks and trade names are those of their respective owners.
This product has not been FDA cleared or approved; but has been authorized by FDA under an EUA. This product has been authorized only for the detection of nucleic acid from SARS-CoV-2, not for any other viruses or pathogens. The emergency use of this product is only authorized for the duration of the declaration that circumstances exist justifying the authorization of emergency use of in vitro diagnostics for detection and/or diagnosis of COVID-19 under Section 564(b)(1) of the Federal Food, Drug and Cosmetic Act, 21 U.S.C. § 360bbb-3(b)(1), unless the declaration is terminated or authorization is revoked sooner.

About the Cue Health Monitoring System

Charging the Cartridge Reader

Indicator Lights

Battery Level

When the Cartridge Reader is connected to power, the lights will sequentially illuminate then flash to indicate the battery charge level.

Prompts for an Action

While running a test or after a test has been completed, the indicator lights will sweep from top to bottom or in reverse

Alerts

When connecting to the Cue Cartridge Reader or at the start of a test, the indicator lights will flash in different patterns

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>