SARGO G10 Thumb Camera User Manual
- June 1, 2024
- SARGO
Table of Contents
SARGO G10 Thumb Camera
Specifications
- Waterproof up to 30 meters with waterproof case
- Supports memory cards up to 128GB (G10) or 256GB (G10+)
- Operating temperature: Normal heat during use
- Battery: Usage-dependent, recommended full charge upon receiving
- Charging: Standard 5V 1A-2A charger required, fast chargers prohibited
Product Usage Instructions
Waterproof Attention
When using the waterproof case, ensure it is tightly sealed before diving.
Perform a waterproof test before use by submerging the case with tissue
inside.
Operating Instructions
- Short press button to start recording
- Double-click button for specific actions like turning on/off WiFi
- Long press button for power on/off
Memory Card
The camera does not come with an internal memory card. Use a high-speed memory
card up to 128GB (G10) or 256GB (G10+).
Temperature Note
Expect higher heat during camera use, which is normal and does not affect
operation.
Charging Instructions
Use a standard 5V 1A-2A charger for charging. Fast chargers are not
recommended.
Battery Life
Battery life varies based on usage environment and habits. Fully charge the
camera upon receiving it.
Notices
- Waterproof Attention: When the camera is equipped with a waterproof case, it supports waterproofing up to 30 meters. Before diving, please ensure the waterproof case is tightly sealed. After returning ashore, wipe the waterproof case and then perform a waterproof test: it is recommended to place a tissue inside the waterproof case and submerge it in water for testing before using the waterproof case.
- Memory Card: The camera itself does not come with internal memory and requires a high-speed memory card. G10 supports up to 128GB, while G10+ supports up to 256GB.
- Temperature Note: Digital cameras will emit higher heat during use, which is normal and does not affect operation.
- Charging Instructions: The camera requires a standard 5V1A-2A charger for charging. Fast chargers are prohibited.
- Battery Life: The camera’s battery life may vary due to usage environment and personal habits. It is recommended to fully charge the camera upon receiving it.
Operating Instructions
WiFi Connection
- Scan the QR code to enter the public account. Follow the prompts to download the software and install it.
- Double-click the camera button to activate WiFi. WiFi Name: G10*** WiFi Password: 12345678
- Open the software, click “Add Device,” enter the phone’s WiFi connection interface, find the camera’s WiFi name, click and enter the password to successfully connect. If prompted that WiFi cannot access the internet, click “Use” to proceed.
- Once Wifi connection is successful, return to the software, click to enter the device, and you can see the real-time image. You can also control the camera or adjust related parameters through the software.
- In the software’s album, you can view photos and videos taken by the camera and download them to your phone. Downloading does not require mobile data.
- Double-click the camera button to exit W iFi mode.
Scan the QR code to follow the public account for usage tutorials.
Warranty Card
Warranty Terms
Warranty service is only applicable within the valid warranty period under
normal usage conditions. Faults caused by product quality issues, excluding
human factors, are eligible for warranty. Within 7 days from the date of
purchase, free return/exchange is supported by this store (provided it does
not affect secondary sales). Within one year from the date of purchase, a one-
time warranty is provided for faults not caused by human factors. For repairs
required beyond the warranty period or not covered by the warranty, our
company reserves the right to charge repair fees at our discretion.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. in
portable exposure conditions without restriction.
FAQ
Q: What is the waterproof depth of the case?
A: The camera is waterproof up to 30 meters when used with the waterproof
case.
Q: What memory card capacity is supported?
A: The camera supports memory cards up to 128GB (G10) or 256GB (G10+).
Q: How should I charge the camera?
A: Use a standard 5V 1A-2A charger for charging. Avoid using fast chargers.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>