FeeLTEK Jet Glass 7 in 1 USB-C Hub User Manual

June 9, 2024
FeeLTEK

FeeLTEK Jet Glass 7 in 1 USB-C Hub

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. Please contact the customer line if you have any questions or comments about the device. ✉ www.alza.co.uk/kontakt ✆ +44 (0)203 514 4411 Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

  • Input USB-C 3.1
  • Output Connector: USB-C PD x 1, USB-C x 1, USB-A 3.1 x 2, SD x 1, Micro SD x 1, HDMI x 1, Data Transfer: USB3.1 (Max 5Gbps), SD 2.0, Micro SD 2.0, Max. Resolution: HDMI up to 4K/2K@30Hz, PD: Max 20 V/5 A
  • Operating temperature 0-45°C
  • Dimensions 125 mm x 39 mm x 9.7 mm
  • Weight 45 g +/- 5 g

Easy user guide

FeeLTEK-Jet-Glass-7-in-1-USB-C-Hub-FIG-1

Please confirm the contents of the package

  • Jet Glass 7 in 1 USB-C x 1

Information for connecting

USB-C

  • Connect the USB-C Connector to your devices without install any driver and use directly.

PD

  1. Please connect the devices before USB-C PD charging, if you connect the PD first, you will not be able to detect the network or the external device. Please re-operate.
  2. If the PD is not inserted, the external hard disk cannot be driven on the NB. The external temperature is about 40 degrees.
  3. Please using a USB-C compliant charging device for USB-C PD.
  4. The product should be placed in a cool and dry place, please avoid sunlight.

Cautions

  • Use only original manufacturer’s cable (that came with the device) or certified cables.
  • Do not drop / Do not clean with any form of detergents.
  • Do not disassemble / Do not place near heat sources (e.g., fire).
  • Do not use under extreme heat or in direct sunlight (>45°C / 113°F) / The product should be placed in a cool and dry place, please avoid sunlight.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative

  • Importer: Alza.cz a.s.
  • Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
  • CIN: 27082440

Subject of the declaration

  • Title: Jet Glass 7 in 1 USB-C Hub
  • Model / Type: FLT007a

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

  • Directive No. 2014/30/EU
  • Directive No. 2011/65/EU as amended 2015/863/EU

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals