truelife NannyCam R3 Smart User Manual
- June 9, 2024
- truelife
Table of Contents
NannyCam R3 Smart
MANUAL
BOX CONTENTS
- Camera (baby unit)
- Micro USB cable + adapter
- Accessories for wall mounting
CAMERA DESCRIPTION
1. Microphone
2. Camera lens
3. Infrared sensor
4. Reset button
5. MicroSD card slot
6. 6 IR diodes for night vision| 7. Speaker
8. Micro USB
9. Antenna
10. Temperature sensor
11. Wall mounting plate
---|---
FIRST USE
-
Download the app
Scan the QR code or enter the URL: truelife.eu/57721/app -
Register or log in using an existing account
a) Registering
If you do not have an account in the app yet, register by pressing the Sign Up button. Select your country/region and fill in your email address. Carefully read the Privacy Policy and check the I Agree box. Next, select Get Verification Code and write down the six-digit code that you receive in your email inbox. Now set your password (6-20 characters with a combination of letters and numbers) and select Go to App.
Note: The code is only valid for 60 seconds. If you have not filled it in by then, press the Resend button and re-enter the code.
b) Logging in with your existing account
If you already have an account in the app, select Log In. Select your country/region, fill in your email address, enter your password and tap the Log In button. -
Pairing your camera with the app
Plug the power adapter connector into the cameras input and the adapter into a mains socket. The camera will start to rotate and report ,,Wait for Wi-Fi config” while it searches for a home router to connect to. **Note:** If you do not hear any audio signal, carefully rotate the camera lens upwards and hold the reset button for five seconds (see CAMERA DESCRIPTION, point 4). If the camera is currently rotating, wait until it comes to a complete stop to avoid damaging the motor. The camera must be plugged into the mains for the factory reset to be successful. In the app, select Add Device. In the left column, choose Security & Video Surveillance and then select Smart Camera (Wi-Fi). Even though there isnt an LED indicator on the camera, check the box Make sure the indicator is flashing quickly. Select Wi-Fi (2.4 GHz), enter the password for that Wi-Fi, and press Next.
Note: The app requires location access to pair properly.
Hold the QR code on your display in front of the camera lens at a distance of 15 to 20 cm. When the pairing is successful, the audio signal ,,Connect router”, ,,Connect internet” and ,,Add device success” will be heard. Select I Heard a Prompt and wait until the device has been added. When finished, select Done. The camera is now ready to use.
COMMON PROBLEMS
- Make sure the camera is connected to the correct Wi-Fi network. The camera does not support 5 GHz, only 2.4GHz.
- The camera supports WPA2 (AES/TKIP) or WPA3, not WEP encryption. The router must also have DHCP enabled for IP address allocation and zero-handoff disabled.
- The Wi-Fi password must not contain special characters: ~!@#$%^*-.
- When configuring, make sure the router, smartphone and camera are as close as possible to each other. When pairing, you must be less than 5 m from the router.
- If you are still unable to pair, uninstall the app, restart your smartphone and camera, and do everything again according to the instructions.
- Other issues when pairing include a weak Wi-Fi signal, interference from nearby networks, or incompatible smartphones (IOS 7 and above/Android 4.0 and above).
SECURITY AGAINST HACKING
The app uses a five-layer security technology to ensure the security of smart
devices without the risk of information being compromised: military-grade AES
data encryption, triple-check authorization and authentication, two-code
dynamic key, and https channel encryption guarantee the security of network
traffic.
Note: To increase protection against hacking, set the strongest possible
password on your Wi-Fi network. The password should consist of at least eight
characters with a combination of uppercase and lowercase letters and numbers.
Do not use special characters ,,~!@#$%^*-“, otherwise the camera will not be
able to pair.
MAIN FUNCTIONS OF THE APP
| Set the quality of the video transmission to SD or HD
---|---
| Mute/unmute the audio
| Zoom in on the image (can also be done with two fingers)
| Switch to full screen
| Take a screenshot (the screenshot will be saved to the phone’s gallery)
| When held, it transmits audio from your smartphone microphone to the
speaker on the camera
| Press the button will make the audio two-way
Note: Basic function settings → Audio mode.
| Capture video (the video will be saved to the phone’s gallery)
---|---
| View the gallery of captured images and videos
| Set the light or dark theme of the app
| Set night vision
Note: When set to Auto, the camera will automatically switch to night
vision mode when it gets dark, and the image switches to black and white.
| Set the camera volume
---|---
| Turn on the lullaby
| Motion tracking – the camera will rotate to follow motion
Note: Under the „Activity Area“ settings, you can set the parts of the
image that will be monitored and about which you receive notifications.
Adjust, drag or resize the red frame by adjusting the corners of the frame.
| Sound detection – sends a notification to your smartphone when sound is
detected
---|---
| Temperature settings – sends a notification to your smartphone when the
upper and lower temperature limits you set are detected
Note: To view the notifications for motion, sound and temperature
detection, please make sure you have notifications enabled for the app in your
phone settings.
|
---|---
Note: Insert the card when the camera is switched off into the slot under the lens (see CAMERA DESCRIPTION, point 5). Format the card in the camera before recording. In the settings menu, you can also select whether the camera will record continuously to the card or only when motion is detected.
SPECIFICATIONS
| Angle of view | 100° |
|---|---|
| Horizontal camera rotation | 350° (enables a 360° view) |
| Vertical camera rotation | 45° (enables a 90° view) |
| Automatic night vision | Yes (visibility up to 10 m) |
| Video format | MP4, H.264 compression |
| Wi-Fi | 2.4 GHz (range 15 metres camera → router) |
| Video resolution | 1080P (1920×1080 12 FPS), VGA (640×480 12 FPS) |
| Max. microSD card capacity | 128 GB |
| Power input | Micro USB |
| Power consumption | 5 V, 0.32 A |
| Dimensions | 80 × 116 × 90 mm (L × W × H) |
| Weight | 180 g |
SAFETY WHEN WORKING WITH THE DEVICE
- Carefully read the enclosed safety instructions.
- For correct handling of the product, download and read the latest version of the manual from www.truelife.eu.
- Printing errors and changes to information reserved.
Manufacturer:
elem6 s.r.o.,
Braškovská 15, 16100 Prague 6,
Czech Republic
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>