medela PersonalFit Flex Breast Shield and Connector Instruction Manual

: June 9, 2024
: medela

Table of Contents

medela PersonalFit Flex Breast Shield and Connector
OVERVIEW
DIMENSION
Instructions for use
Intended use
Assembling and usage
Product overview
Product variants
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

medela PersonalFit Flex Breast Shield and Connector

OVERVIEW

DIMENSION

Instructions for use

PersonalFit™ Flex breast shield and connector

Product description: The reusable PersonalFit Flex breast shield is compatible with the Medela breast pumps Swing Maxi Flex, Swing Flex and Freestyle Flex. PersonalFit Flex breast shields are available in different sizes (see Product variants). Refer to the pump manual for instruction on operating the pump and pump set.

Intended use

Breast shield
The breast shield is intended to contact the breast and nipple tissue of the user and to be connected to the connector assembly of PersonalFit PLUS and PersonalFit Flex in order to apply vacuum at the breast and channel breast milk from the breast to the connector assembly.

Connector
The connector assembly is intended to be connected to the Breast Shields of PersonalFit PLUS and PersonalFit Flex as well as to the Medela retail bottle in order to apply vacuum at the breast and channel breast milk from the breast to the bottle.

Furthermore the connector assembly is intended to provide a leakproof barrier between fluid and vacuum loaded connector components and the tubing (motor unit).
Furthermore the connector assembly is intended to provide a tubing port.

Indication for use

Refer to the manual of the pumps listed under product description.

Important safety information

Caution: The breast shield and connector are personal care items intended for use by a single user only. It should not be shared between mothers.

Use Medela original accessories only.
Inspect before each use. Replace mouldy, damaged or worn parts.
Never leave packaging and components unattended. Keep them out of reach of children.
Pressing shields too firmly onto the breasts may affect the milk flow.
If problems or pain occur, consult a breastfeeding specialist.

Cleaning and hygiene

Perform all steps as described in the instructions for use of the Medela breast pump disassemble, wash, sanitize.
Clean the breast shield immediately after use to avoid drying up of milk residues and to prevent growth of bacteria.
Only use drinking-quality water for cleaning.
Take care not to damage parts when using a brush.
Do not use abrasive washing-up liquids/detergents when cleaning the breast pump or pump set parts.
Disassemble the pump-set into its individual parts.

Wash – before 1st use and after each use

Rinse all parts with cold, clear drinking-quality water (approx. 20 °C).
Clean these parts with plenty of warm, soapy water (approx. 30 °C). Use a commercially available washing-up liquid, preferably without artificial fragrances and colouring (pH neutral).
Rinse the parts with cold, clear drinking-quality water for 10–15 seconds (approx. 20 °C). Dry after washing.

Sanitise – before 1st use and once a day

Cover the breast shield with water and boil at least 5 minutes. As an alternative to boiling use Quick Clean bags in the microwave in accordance with the instructions.

Drying / Storage

Dry with a clean cloth or leave to dry on a clean cloth. Put the clean parts in a clean storage bag or a clean environment. Do not store parts in an airtight container/bag if moist. It is important
that all residual moisture dries.

Assembling and usage

For information about how to use the breast shield and breast pump, see the instructions for use of the breast pump/pump set 1.

Choosing your PersonalFit Flex breast shield size 2
The breast shield size could change over the duration of your pumping experience. At all times during this period, the breast shield must fit correctly. A correctly fitting breast shield helps to prevent compression of the milk ducts during pumping, supports optimal emptying of the breast and helps to maximize milk output.

In a correctly fitting breast shield the nipple is centered and moves freely 3.
Find more information at www.medela.com/personalfit

Product overview

a) connector
b) lid
c) membrane
d) breast shield
e) protective cover – Remove and dispose the protective cover from the breast shield before first use.

Product variants

101033953: PersonalFit™ Flex breast shield S
(Ø 21 mm)
101033964: PersonalFit™ Flex breast shield M
(Ø 24 mm)
101033992: PersonalFit™ Flex breast shield L
(Ø 27 mm)
101033997: PersonalFit™ Flex breast shield XL
(Ø 30 mm)
101034005: PersonalFit™ Connector

Material breast shield: Polypropylene, Thermoplastic Elastomer
Material connector: Polypropylene, Silicone
Disposal: According to local regulations.
CE-mark according to 93/42/EEC

This symbol indicates the manufacturer.
This symbol indicates to follow instructions for use.
This symbol indicates the manufacturer’s sales article number.
This CE-mark indicates the compliance essential requirements of the Council Directive 93/42/EEC of 14 June 1993 concerning medical device.
This symbol indicates that the packaging contains products intended to come
This symbol indicates to keep the device away from sunlight.
This symbol indicates that the material is part of a recovery/recycling process.
This symbol indicates a carton package.
This symbol indicates the temperature limitation for operation, transport and storage.in contact with food according to regulation 1935/2004.
This symbol indicates the humidity limitation for operation, transport and storage.
This symbol indicates the atmospheric pressure limitation for operation, transport and storage.
This symbol indicates to keep the device dry.
This symbol indicates unique GSI Global Trade Item Numbers (GTIN).
This symbol indicates do not dispose the device together with unsorted municipal waste (for EU only).
This symbol indicates to handle the fragile device with care.