ROCK U1 / U1A AX1800 Wi-Fi 6 Dual-Band USB Adapter Installation Guide
- June 9, 2024
- ROCK
Table of Contents
ROCK U1 / U1A AX1800 Wi-Fi 6 Dual-Band USB Adapter Installation Guide
In the box
- Wireless USB adapter x 1
- Quick Installation Guide x 1
For U1A, a USB extension cable is provided.
Install the wireless USB adapter
(Windows 10 supported)
Tips
If a wireless adapter has already been installed on your computer before,
please uninstall the existing wireless adapter driver first. For detailed
steps, see Appendix 1.
Install the wireless USB adapter
-
For U1, plug in your wireless USB adapter to a USB port on your
computer.
-
For U1A, plug one end of the USB extension cable into the wireless USB adapter and the other end into the USB port on your computer.
Double-click the This PC icon
Tips
If you cannot find the This PC icon, please add the icon to your desktop
first. For detailed steps, see Appendix 2.
Double-click rock space.
Double-click Setup.exe , and then install the wireless USB
adapter according to the prompts
Wait a moment until the initialization finishes. Now you can connect your
computer to the Wi-Fi network
Connect to the Wi-Fi Network
(Windows 10 is used as an example)
-
Click in the bottom right corner of your screen, select the desired Wi-Fi network, and then click Connect.
-
Enter the wireless password if the network is encrypted, click Next, and then follow the system prompts Connected successfully.
Appendix 1: Uninstall the existing wireless adapter driver on your computer
Perform the following steps (Windows 10 is used as an example):
-
Click in the bottom left corner of your screen, and then click .
-
Click Apps.
-
Find and uninstall any other installed wireless adapter drivers.
Appendix 2: Add the This PC icon to your desktop
Perform the following steps (Windows 10 is used as an example):
-
Right-click anywhere on your desktop and select Personalize.
-
Select Themes from the left sidebar, and then click Desktop icon settings.
-
Check Computer and click ok.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment of and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device is for indoor usage only. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.Operating frequency:
2.4 GHz: 2402–2480 MHz 5 GHz: 5150–5350 MHz, 5470–5725 MHz, 5725–5850 MHz
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. (2)
To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
- Operating Temperature: 0°C–40°C
- Operating Humidity: (10%–90%) RH, non-condensing
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be
handled pursuant to European directive 2012/19/EU in order to be
recycled or dismantled to minimize its impact on the environment. User has the
choice to give his product to a competent recycling organization or to the
retailer when he buys a new electrical or electronic equipment.
S ervice and Support
To check the full list of ROCK network devices or learn more about
the device (such as the setup video and installation guide), visit
https://rockspaceworld.com or simply scan the QR code below.
Website: https://rockspaceworld.com
Email: [email protected]
Tech Support:
Email (US): [email protected]
Telphone (US): +1 833-816-6558
Email (EU): [email protected]
Telphone (UK): +44 8082737556
Service Time: EST 10:00 – 21:00 / CET 16:00 – 24:00
from Monday to Friday
CE Mark Warning
This is a Class B product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
Operations in the 5.15–5.25GHz band are restricted to indoor use only.
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. (2)
To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable
Declaration of Conformity
Hereby, SHENZHEN HECHUANG YOUSU TRADE CO., LTD. declares that the radio
equipment type U1 & U1a is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
address: https://rockspaceworld.com/pages/support
- Operating Frequency:
- 2.4 GHz: EU/2400–2483.5 MHz (CH1–CH13)
- 5 GHz: EU/5150–5250 MHz (CH36–CH48)
- EIRP Power (Max.):
- 2.4 GHz < 20 dBm
- 5 GHz: < 20 dBm