MTI BASICS MBIS6032 Soaking Heated Whirlpool and Air Bathtub Instruction Manual
- October 29, 2023
- MTI BASICS
Table of Contents
MBIS6032 Soaking Heated
Whirlpool and Air Bathtub Instruction Manual
MBIS6032
60” x 32” x 19.25”
Installation: Alcove
Material: Acrylic
Plumbed Weight: 129 lbs / 59 kg
Soaker Weight: 105 lbs / 48 kg
Average Fill: 34 gal to above jet level
Maximum Fill: 51 gal to overflow
| Package | Package Content | Part # |
|---|---|---|
| Soaker | Soaking bath – No jets. Integral front skirt, 3-sided integral tile | |
| flange and textured bottom. | MBSIS6032 | |
| Air Bath | 12 air jets, heated air blower, pre-leveled foam base, textured |
bottom, integral front skirt and 3-sided tile flange.
pre-leveled foam base increases overall tub height 2”-3”| MBAIS6032
Whirlpool| 6 point-massage jets, 1-bhp pump, integral front skirt, 3-sided
integral tile flange and textured bottom.| MBWIS6032
Options Must be ordered at time of purchase.
Standard White (no charge)
Color Upgrade: Biscuit (MTISCOLOR)
Quick Ship / Priority
Soaker & Whirlpool (QSHIPMTIS)
Airbath (QSHIPMTISA)
Inline Heater
For Whirlpool (HTRMTIS) uses existing pump For Soaker & Air Bath (MBHTI SOAK)
heater with recirculating pump
Accessories.
Lift and Turn Drain & Overflow
Chrome (MBWOC), White (MBWOW),
Brushed Nickel (MBWOBN)
Pillows
Soft Pillow
White (MBPSW) Black (MBPSB)
Roll-Up Pilow
Light Aqua (MBPRUC) Black (MBRUB)
Important Ordering and Installation Information
- Before ordering or installing, consider access to equipment.
- Must specify left- or right-hand drain when ordering.
- Tubs equipped with hydrotherapy components have a removable front panel.
- Use proper bedding compound to fully level and support the tub.
- Tubs equipped with an air system or factory installed pre-leveled foam base are designed to install directly onto a flat level subfloor.
- Location of all therapy components is predetermined and cannot be changed.
- Suction and control locations may vary.
- Options listed cannot be combined with Designer Collection options.
- Before discarding tub crate, check for accessories that may be packaged inside.
- All product measurements are +1/2”.
- Specifications and configurations are subject to change without notice.
- Measurements herein supersede all others published prior to publication date below.
| Hydrotherapy Package | Components Included | GFCI / 110V |
|---|---|---|
| Soaker with Optional Inline Heater | ½-bhp pump, inlineheater | 1-15 amp |
| Whirlpool or Air Bath | 1-bhp pump | 1-15 amp |
| Whirlpool with Optional Inline Heater | 1-bhp pump, inline heater | 1-20 amp |
| Air Bath with Optional Inline Heater | 1-bhp pump, inline heater | 2-15 amp |
NOTE: Filling this tub to the maximum may require an above average size or
dedicated water heater.
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
Rev. 04 19 2022
CSA # MTIS-IS6032
©2021 by MTI Baths, Inc. Modification Rights Reserved.
Documents / Resources
| MTI
BASICS MBIS6032 Soaking Heated Whirlpool and Air
Bathtub
[pdf] Instruction Manual
MBIS6032 Soaking Heated Whirlpool and Air Bathtub, MBIS6032, Soaking Heated
Whirlpool and Air Bathtub, Whirlpool and Air Bathtub, Air Bathtub
---|---