XBOX MIG-X PRO Smartphone Controller Instruction Manual

: June 9, 2024
: XBOX

XBOX MIG-X PRO Smartphone Controller

XBOX-MIG-X-PRO-Smartphone-Controller-product-image

Thank you for purchasing this NACON® product.
This product has been designed to enhance your gaming experience. Please keep this user manual in a safe place for future reference.

Warranty

To access the declaration of conformity, please go to: https://my.nacongaming.com/my-nacon/support/

Product features

Nacon MG-X PRO Controller for iPhone®
Asymmetrical joysticks
Built-in battery, rechargeable via USB-C
Up to 20 hours of battery life
Compatible with iOS14 and above
Bluetooth® connection to your iPhone® (Bluetooth® 5.0)
Universal Screen compatibility up to 6.7”
Maximum opening size 163 mm

Package contents

Nacon MG-X PRO Controller for iPhone®
80 cm USB-C cable
Quick IB
Quick Start Guide
Warranty
Use precautions
Compliance information

Control elements

XBOX-MIG-X-PRO-Smartphone-Controller-1

Turning the controller on/off

To turn on the controller, simply press the Home button, and the controller will connect to the last iPhone® it was synced with.
To turn off the controller, simply hold down the Home button for 6 seconds.
Please note: the controller turns off after 15 minutes of inactivity to save battery power.

First start-up of the controller

Turn on the controller, and it will go straight into pairing mode. All 4 LEDs should flash at the same time.
Go to the Bluetooth® menu on your iPhone® and start a Bluetooth® device
search. On your iPhone®, you should see the controller appear under the name ‘MG-X PRO MFi’, select it and wait until the controller is in the list of paired devices.

Syncing your iPhone® with the Nacon MG-X Pro controller

Go to the Bluetooth® menu on your iPhone® and start a Bluetooth® device search.
Press the Home button on your controller, the status LEDs should light up one by one. Press and hold the Bluetooth® button on the lower right-hand side for 2 seconds to initiate pairing. All 4 LEDs should flash at the same time.
On your iPhone®, you should see the controller appear under the name ‘MG-X PRO MFi’, select it and wait until the controller is in the list of paired devices. The controller can store up to 5 devices. It will always try to connect to the most recent
device first. If you want to reset the list of devices stored in the controller:

Turn on the controller by holding down the Home button. Once it’s turned on, release the Home button.
Press and hold the Home and Bluetooth® buttons for 5 seconds.
The controller will return to pairing mode and should appear in the list of devices available for pairing.

Battery level indicator

You can see the battery’s charge level at any time while using the product. To do this, quickly double click on the Home button. The LEDs will toggle to indicate the battery’s charge level according to the sequence below:

Battery full (100%): all 4 LEDs are lit
Battery almost full (≥75%): 3 LEDs are lit
Medium battery (≥50%): 2 LEDs are lit
Low battery (≥25%): 1 LED is lit
Very low battery (<25%): no LEDs light up
Critically low battery (<10%): LED 1 will flash

Charging the controller

Take the USB-C cable provided and plug it into the socket on the bottom of the left handle. Then plug the other end into one of the free USB ports on your PC or charger. The LEDs will light up one by one to indicate charging.
Once all four LEDs are lit, your controller is fully charged.

Quickly changing the iPhone® connected to your controller
You can switch from one iPhone® to the previously connected iPhone® at any time while using the product by quickly double-clicking the Bluetooth® button.

Product reset

If at any time during the use of the product you encounter difficulties with its operation, you can shut down the controller.
To do this take a paper clip, or the tool for removing your SIM card from your phone, insert it into the hole on the back of your controller and press the button. After pressing the button, your controller will turn off and you will be able to turn it on again in the normal way via the Home button.

Compatibility

The Nacon MG-X PRO controller allows you to play on Microsoft’s cloud gaming service. An Xbox Game Pass subscription is required to access the gaming service.
The Nacon MG-X PRO controller is compatible with games in the App Store that support
controllers. To find out if the game you wish to play supports the MG-X Pro controller,
please refer to the game’s page in the Apple App Store and look for the controller logo in the line where the game’s rating is located (you will need to scroll from right to left to see it).

Reconfiguring my controller buttons

The buttons on the Nacon MG-X PRO controller can be reconfigured. To do this you need to go to your phone’s options.
Example on iOS 15: go to: Settings/General/Controller/Custom controls and select the button(s) you wish to change. You can restore the default values at any time by clicking on the ‘Restore default values’ button.
Please note: This option is only supported by the Apple® phone system, and Nacon® is not responsible for the availability or removal of this option.

Additional functions of the Options button

In your iPhone® menus, you can assign functions to the Options button on the Nacon MG-X PRO controller and provide quick access to the items listed below via a double tap or long press:

Take a screenshot
Start/stop recording
Capture a highlight

Example on iOS 15: go to: Settings/ General/ Controller/ Custom Controls and scroll down the page to find the ‘SHARING GESTURES’ section, then set up the desired quick action.
Please note: This option is only supported by the Apple® phone system, and Nacon® is not responsible for the availability or removal of this option.

Mobile application

The Nacon MG-X PRO controller can be connected to the mobile application that can be downloaded from the phone’s App Store. To do this, look for the mobile application: ‘MG-X Series’. It will allow you to update your controller and much more!

Positioning your iPhone®

When using your iPhone® with the Nacon MG-X Pro controller, please place your phone in the dedicated slot to secure your device.
Please note: If your phone has a case, it may keep your phone from correctly fitting into the dedicated slot. In this case, to keep your phone from falling out, it is best that you remove your phone case.

Warning: Please be careful not to pinch your fingers in the sliding system when removing your iPhone® from the Nacon MG-X PRO.

Recycling

Do not dispose of this product with the household waste. Dispose of your old electrical appliance at a suitable collection centre. Recycling is important and helps protect the environment by reducing waste. EU and Turkey only.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.

Important precautions

This product is designed for indoor use only. Do not expose it to direct sunlight or bad weather.
Do not expose the product to splashes, rain, drips or moisture. Do not immerse it in a liquid.
Do not expose to dust, high levels of humidity, extreme temperatures or echanical shocks.
Do not use and do not open if the equipment is damaged. Do not attempt to repair it.
When cleaning the outside, only use a soft, clean and damp cloth. Detergents can
damage the finish and get inside the product.
Do not carry the product while holding it by the cable.
This product is not designed for people (including children) suffering from a physical, sensory or mental impairment, or for users without the necessary and relevant experience or knowledge (unless they have been given advice and instructions on how to use the device from a person responsible for the user). Do not leave the product unattended, do not leave this product within the reach of children. Not suitable for children under 7 (the cable can get wrapped around the neck).
The maximum operating temperature must not exceed 35°C

Precautions for use regarding the battery
WARNING

If your product has a built-in, non-replaceable battery, do not attempt to open the product or remove the battery, as you may damage the product and/or injure yourself.
If your product has a built-in replaceable battery, only use the type of battery supplied by Nacon/RIG. Used batteries should be removed promptly and taken to appropriate collection centres.
RECYCLING: The product battery should be recycled or disposed of in the proper manner.
Contact your local recycling centre for instructions on battery removal and disposal.
The battery has a limited lifespan. Battery charge duration gradually increases with repeated usage and age. Battery life also varies depending on the storage method, usage state, environment and other factors.
Charging may not be as effective when performed in other environments.
Battery duration may vary depending on the usage condition and environmental factors.

When not in use : When the controller is not used for an extended period of time, it is recommended that you fully charge it at least once a year in order to maintain its functionality.
WARNING: Risk of fire, explosion and burns.

Do not leave your charged battery for an extended period without the product being used
Prevent metal objects such as keys or coins from coming into contact with a battery or its holder.
Do not attempt to open or damage the battery. It may contain corrosive products which are dangerous if they come into contact with eyes or skin and are toxic if ingested.
Never put a battery in your mouth. If ingested, contact a doctor or poison control centre.
If the product contained in the battery comes into contact with your clothes, skin or eyes, please wash thoroughly with clear water and contact your doctor immediately.
Always keep batteries out of the reach of children.
Never throw a battery into a fire or oven; crushing or cutting a battery may cause an explosion;
A battery should not be subjected to extremely high or low temperature, low air pressure at high altitude during use, storage or transportation, as this may cause an explosion or leakage of flammable liquid or gas

Ergonomics

Keeping your hand in the same position for a prolonged period of time can result in pain. If this happens repeatedly, please consult your doctor.
As a precaution, take a 15-minute break every hour.

Characteristics techniques

Dimensions: 236 x 105 x 49 mm
Detachable cable length: 80 cm
Consumption: 5 V 500 mA
DC power supply
Battery life: 20 hours
Charging time: <2 hours
Type of battery: Lithium-ion
Voltage: 3.7 V
Power: 2.22 Wh
Battery capacity 600 mAh
The controller’s maximum operating temperature is 35°C
EIRP: Information on the emission power of the product:
- Frequency range: (2.402 ~ 2.480) GHz
- Maximum radiofrequency emission power: controller <13 dBm

Nacon hereby declares that the Nacon MG-X PRO radio equipment complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.nacongaming.com

Technical support

UK
Email: support@nacongaming.com
Tel. : (+44)08081010970

Australia
Email: support.us@nacongaming.com
Tel. : (+61)1300512410

Europe
Email: support@nacongaming.com

US/Canada email
(English/French)
Email: support.us@nacongaming.com (Spanish)
Email: soporte@nacongaming.com

US/Canada Phone Support
(English/French/Spanish)
Tel. : 1-833-622-6687

EU Declaration of Conformity

Product: Nacon MG-X PRO Controller for iPhone®
Manufacturer: Nacon
Nacon declares that this product is in compliance with the Union harmonisation legislation:

Directive 2014/30/EU for Electromagnetic Compatibility
Directive 2011/65/EU the restriction of the use of certain hazardous substances in electrical and electronic equipment

The full text, of the EU Declaration of Conformity, is available at the following website: my.nacongaming.com/en- GB/support

UK Declaration of Conformity

Product: Nacon MG-X PRO Controller for iPhone®
Manufacturer: Nacon
Nacon declares that this product is in compliance with the United Kingdom legislation:

Electromagnetic Compatibility Regulations 2016
The restriction of the use of certain hazardous substances in electrical and electronic equipment regulations 2012

The full text, of the UK Declaration of Conformity, is available at the following website: my.nacongaming.com/en- GB/support

FCC: Declaration of Conformity

United states
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

WWW.NACONGAMING.COM
@NaconGaming Nacongaming Nacon International