IGIA Fine Necklines Micro-Current Gel Pad, Multi Color User Manual

IGIA Fine Necklines Micro-Current Gel Pad, Multi Color User Manual

PRODUCT INTRODUCTION

FINE NECKLINESTM is a resistance toning system for the neck and breast muscles. It is designed to help to make you look younger, rejuvenate the skin, prevent wrinkles and help you to have a radiant, smooth neck without pain or surgery. All in just 10 minutes a day.

FINE NECKLINES” ‘ may help eliminate sagging skin and helps drastically reduce the look of a double chin or neck fold.

• Helps Stimulate the facial muscles.
• Helps Smooth Fine Lines & Wrinkles.
• Helps Rejuvenate your complexion.
• Helps Lifting and Firming “Turkey Neck.”
• Helps Tightening of sagging skin.
• Helps Reduce Expression Marks.
• Helps Toning, Strengthening and Combat Flabbiness.

THE SET INCLUDING

• Electronic device
• Electrode Gel pad
• User’s manual
• lx3V button Cell (Battery) optional

FUNCTION OF THE KEY

| On / Hi:  To turn on the unit or to gradually increase the intensity upward to level 10.
Off/Lo: To turn off  Unit or gradually reduce the intensity downward to level 0.
---|---

HOW TO OPERATE

1. Remove the battery cover at the back of the micro-computerize device, by insert 1 x CR 2032 3V size battery into the battery compartment. Then close the battery cover.

2. Connect the device to the electro gel pad with the snap button.

3. Remove the PE protecting film of the electro gel pad, then place it onto your upper breast (Suggest you to keep the PE protecting film for storage)

4. Press once the On/Hi button to turn on the device, and the indicating light will be light up in green.

5. Then press again the On/Hi button to select the intensity of the massage level.
   It is suggested that one increase the intensity gradually, in order to feel which intensity level is suitable for your needs. For better results, it is recommended to lie down while using the device, so that the gel pad will stick firmly on the skin.

6. The device comes with with 10 minutes auto timer, once the intensity level is selected, the device will be auto count down, and will switch off after 10 minutes.

7. You can turn off the device anytime during use by pressing the Off/Lo key till the indicating light is off.

CLEANSING AND MAINTENCE

Main Device

• Turn off the power and remove the batteries from the unit for storage in the correct way.
• Always keep the main device clean by using a soft cloth to clean the surface of the unit.
• The device is non-waterproof. So don’t let water enter the product, don’t touch it with wet hands and don’t place or use it in a moist environment.
• Do not spill liquid on the device
• Do not immerse the device in water
• Do not clean with chemicals

Electro Gel pad

• When not in use, store/replace the Electrode Gel pads on the original PE protecting film provided at room temperature.

• Keep the Electrode Gel pads clean at dust free and dry location, keep away from oily or sticky location. Otherwise the life of the electrodes varies depending on skin conditions, storage, amount of use, type of stimulation, and stimulation site.
  Usage may be extended by carefully cleaning the gel surface with water.

• Single patient use only.

• Do not apply to broken skin. Should a skin rash occur , discontinue use and contact your physician

• Do not use tissue, cloth etc. to scratch the electrode surface.

• Do not use finger nail, brush etc. to damage the electrode surface.

• Do not frequently clean the pads, and don’t use the detergent or hot water to clean the electrode gel pads

TROUBLE SHOOTING

•  Battery not installed
•  Battery installed incorrectly
•  Battery is dead

|

•  Install Battery
•  Check polarity “+” sign faces you
•  Replace Battery

WITH LED INDICATION LIGHT BUT NO FEELING|

•  No skin contact
• Unit not snapped on gel pad correctly

|

• **** Make sure the skin is touching the electrode pad.
•  Check that device is connected firmly with both snap button of the elect iode pad

 |

•  Intensity level at 0
•  Microprocessor hang up – Battery is low

|

•  Push ON/HI button to increase intensity
•  Reset by removing Battery for 1 minute, Re-insert Battery – Change battery

---|---|---
ALL BUTTON DOES NOT WORK WELL|

• Microprocessor hang up – Battery is low

|

•  Reset by removing Battery for 1 minute, Re-insert Battery.
• Change the battery

PRODUCT SPECIFICATION

• Product Number: MC-0367
• Voltage : 3V
• Maximum operating current : 5.6pA
• Maximum power : 60mW

Customer Service Phone: 516-653-0666 Email: [email protected], www.IGIA.com. Individual results may vary. This product has not been evaluated by the FDA. Fine Necklines”‘ is NOT intended to diagnose, treat, cure or prevent any disease, illness or medical condition. The product color or appearance may vary.

PRECAUTIONS FOR USE

1. Safety not determined for use during pregnancy: DO NOT USE.
2. Persons with heart problems or persons using a heart pacemaker or with a cardiac condition: DO NOT USE.
3. Persons with suspected or diagnosed epilepsy: DO NOT USE.
4. After childbirth and with breastfeeding: DO NOT USE.
5. Epilepsy: DO NOT USE.
6. Don’t place it near to your heart area.
7. must be kept out of reach of children.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>