eTEC E7032S Flat Panel TV Mount Stand Instruction Manual
- June 4, 2024
- eTEC
Table of Contents
eTEC E7032S Flat Panel TV Mount Stand
PARTS
INSTALLATION INSTRUCTIONS
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
IF USING THIS STAND AS A CONSOLE, SKIP TO PAGE 16 AND INSTALL THE 3 GLASS SHELVES TO COMPLETE THE CONSOLE STAND
STEP 7
STEP 8
STEP 9
STEP 10
LIMITED SIX-YEAR FURNITURE WARRANTY
We warrant this product to you, the original purchaser at the time of purchase
printed on a dated store receipt froman authorized ETEC retailer and for a
period of six-years thereafter that our furniture product and all it’s parts
and components are free of defects in material and workmanship under normal
use. This warranty is subject to the provisions below. ETEC’s sole obligation
and the purchaser’s exclusive remedy pursuant to these warranties are limited
to replacement at ElECs sole discretion. I here are no other warranties except
as expresSively set forth Delow either expressed or implied, including any
warranty or merchantability tor any particular purpose. Should you be missing
any of the assembly parts or components (screwS, pieces, etc.), please contact
the Technical Support Center to secure a replacement for those parts. It is
not necessary to bring the entire unit back to the store. When calling. please
use the parts list found in the construction Manual to help us accurately
identify the missing parts so we can promptly provide replacements. Our
Customer Support Center is available Monday and Saturday (10:00 AM to 7:00 PM
EST) for technical aor troubleshooting. 1o contact us, please call
1-85-994-3832 or visit www.sibrands.com. Istane ce This warranty is expressly
limited to the replacement of furniture parts and components described in the
parts list located in the Instruction Manual included with the product. This
warranty applies under conditions of normal use. This warranty does not cover:
any product, which has been subject to damage due to improper assembly or
disassembly, products that were not assembled, installed, used, or maintained
in accordance with the product assembly instructions&warnings, acts of nature,
misuse, neglect, accidents, abuse, exposure to elements, Outdoor use, extreme
temperature ranges, damage during transit, commercial use, modification of, or
to any part of the product or attachments to the product not approved by ETEC.
Also not covered are costs for assembly/disassembly labor, costs incurred in
shipping the unit or parts for warranty repair/exchange or any products
purchased trom unauthorized ETEC Sellers. Under no circumstances shall ElEC,
be liable for any loss (direct, indirect, incidental, foreseen, unforeseen,
special or consequential) or for any damage arising out of, or in connection
with, the use of this product. Nor shall ETEC have any responsibility for
incidental or consequential damages resulting from the breach of this warranty
including but not limited to inconvenience, purchase or rental of replacement
products, loss of profits or commercial loss.We reserve the right to request
damaged parts or units be shipped to our offices for inspection or
confirmation of
any warranty claims. This warranty does not cover product sold ‘As Is. This
warranty is valid only to the original purchaser of the Product in the United
States and Canada and grants specific legal rights.
Schoenfeld International Inc and ETEC
5001 American Boulevard West
Suite 275
Bloomington, Minnesota 55437
OSchoenfeld International Inc., 2019
EZ032S Ver 1 1October 2019