bryant SYSTXBBECC01-C Evolution Connex Control User Guide

June 6, 2024
bryant

Bryant SYSTXBBECC01-C Evolution Connex™ Control User Guide

Bryant Logo

SYSTXBBECC01-C, SYSTXBBWEC01-B, SYSTXBBECF01-B, SYSTXBBWEF01-B Evolution® Connex™ Control

Please review full installation instructions before installing this product.

Safety Considerations

This instruction covers installation of the Evolution Connex Control only. Physical installation instructions for the indoor and outdoor equipment, and accessories are provided with each unit.

Mounting Evolution Connex System Control

Mount the backplate on the wall. Connect wires to connector in backplate. See Fig. 1, Fig. 2, and Fig. 3 for typical examples of the Evolution Connex Control to the indoor and outdoor equipment connections. Position the bottom of the control in the backplate. Snap the top of the unit firmly to the backplate.

Figure 1 - Four-Wire Connection Diagram

Figure 2 - Connection Diagram for Furnace

Figure 3 - Connection Diagram for FE Fan Coil

Power Up Sequence

This section addresses initial power up (or commissioning) of a new Evolution Connex Control. The User Interface will communicate and identify all Evolution components in the system.

Fig. 4 shows an example of screens for the power up sequence. Exact screens will be dependent on actual system installations. The first screen addresses the indoor equipment. Follow the prompts on the subsequent screens until presented with the summary screen.

NOTE: Refer to full installation instructions if equipment cannot be found.

Figure 4 - Power Up Sequence

Training

My Learning Center is your central location for professional residential HVAC training resources that help strengthen careers and businesses. We believe in providing high quality learning experiences both online and in the classroom.

Access My Learning Center with your HVACpartners credentials at www.mlctraining.com. Please contact us a mylearning@carrier.com with questions.

© 2021 Carrier. All rights reserved.
A Carrier Company
Edition Date: 08/21
Catalog No: SYSTXBBECC-05QS
Replaces: SYSTXBBECCC-04QS

Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

Documents / Resources

| bryant SYSTXBBECC01-C Evolution Connex Control [pdf] User Guide
SYSTXBBECC01-C, SYSTXBBWEC01-B, SYSTXBBECF01-B, SYSTXBBWEF01-B, Evolution Connex Control
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

bryant User Manuals

Related Manuals