BLUETTI EP800 Generator Installation Guide
- July 19, 2024
- Bluetti
Table of Contents
BLUETTI EP800 Generator
Thank You
Thank you for making BLUETTI a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable
future through green energy storage solutions while delivering an exceptional
eco-friendly experience for our homes and our world.
That’s why BLUETTI makes its presence in 100+ countries and is trusted by
millions of customers across the globe.
Copyright © 2024 Shenzhen PowerOak Newener Co., Ltd. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by
any means without the prior written consent of Shenzhen PowerOak Newener Co.,
Ltd.
Notice
BLUETTI’s products, services, and features are subject to the agreed-upon
terms and conditions during purchase. Please note that some products,
services, or features described in this manual may not be available under your
purchase contract. Unless otherwise specified in the contract, BLUETTI makes
no representations or warranties of any kind, express or implied, with respect
to the contents of this manual.
The contents of this manual are subject to change without notice. Please
get the latest version from: https://www.bluettipower.com/pages/user-
guides
If you have any questions or concerns about this manual, please contact
BLUETTI support for further assistance.
Shenzhen PowerOak Newener Co., Ltd.
F19, BLD No.1, Kaidaer, Tongsha RD No.168, Xili street, Nanshan, Shenzhen,
China Web: https://www.bluettipower.com
Working Principle
Manual Start: Enable the Generator startup settings in the BLUETTI app,
and the system working mode operates as if in “Backup mode”. While the
Generator is running, it supplies power to the load and fully charges the
system. When the system is fully charged and the Generator stops running and
switches to off-grid operation, the load is powered by the EP800 energy
storage system.
Attention: Deactivate the Generator in the app when returning to grid
power.
Automatic Start: “Enable Generator” Mode in the BLUETTI app, the
Generator automatically starts by receiving the signal through the DRMs/COM
communication cable. Without grid power, Generator supplies power to the load
and fully charges the system as if in Backup mode. When the grid is restored
it switches back to grid power, the Generator stops running and the system
supplies power to the loads.
Note: Don’t forget to disable the “Enable Generator” Mode in the app when
grid restored.
Electrical Diagrams
Manual Start
Automatic Start
Note: The EP800 electrical diagram has no CT on the grid side.
Procedures
Step 1: Wiring
Connect the cables according to the electrical diagrams above.
Note: Install a transfer-switch between the grid and the Generator.
Step 2: Power on
Press and hold the battery power button to activate the energy storage system. Refer to the product’s user manual and related materials for detailed instructions.
Step 3: Enable Generator
Access the “Advanced Settings” page in the app and turn on the “Enable
Generator” Mode. Refer to the product’s app user manual for detailed
instructions.
Step 4: Configure Grid Input
Access the “Advanced Settings” page in the app and set the grid input limits.
Be sure to set the power and current below 80% of the Generator’s rating.
Refer to the product’s app user manual for details.
Step 5: Initiate
Turn on the “System Switch” to enable the Generator via the app.
Precautions
- The Generator application cannot be enabled at the same time as the AC coupling application/micro-inversion application.
- The power limit and current limit at the grid inlet cannot be greater than 80% of the diesel engine rating.
- When the power grid exists, a mutually exclusive switch is required between the power grid and the diesel engine.
- Use only compatible Generators.
- Not all generators are compatible with EP800 , please contact BLUETTl before installation.
Software Version (minimum required version)
EP800 ESS: ARM502711, DSP502612, PBOX904311, BCU102514.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>