pTron Fusion 10W Wireless Soundbar User Manual

pTron Fusion 10W Wireless Soundbar

Button Description

Power On & Pairing

1.  Power On the soundbar by Pressing the Power button until blue LED blinks in keys.
2.  Open Bluetooth function on your Device and Search for the Available Bluetooth device.
3.  Click on ‘pTron BT Speaker’ to connect.

Power Off:
Press Power button for 3 seconds to Turn Off the soundbar.

Bluetooth Connectivity Automatic

Just Turn On the soundbar. It will Automatically Connect to the Last Connected Device.

Note: The last connected device must be turned on, Bluetooth function must be active and both the devices must within 10 meters wireless range.

Modes: There are 4 modes.

1.  Bluetooth mode
2.  Aux 3.5mm
3.  Play by TF card
4.  Play by USB drive

Note:

1.  TF card mode will be active only when a TF card is inside the TF card port.
2.  USB Drive mode will be active only when an USB drive is inserted.
3.  AUX Mode will be active only when an Aux cable is connected.

Aux Function

1.  Turn ON the speaker.
2.  By default Bluetooth mode will open.
3.  Connect the Aux cable with the speaker & the phone.
4.  Then press the Power/Mode button once then Aux mode will activate.
   Now, you can use this function.

TWS Function: (Connecting 2 Fusion Evo together)

1.  Just turn on the speaker.
2.  By default Bluetooth mode will open.
3.  Now, press the MFB button twice to activate TWS mode.
4.  And then both the speakers will get connected.

Note:

1.  Need to keep the speakers closer for pairing.
2.  This function can also be used when either of the speakers is connected to a device through Bluetooth mode. At that time, also we can connect 2 speakers and there is no need to power off or to unpair or to disconnect.

Call & Music Functions

• Answer/Hangup a Phone Call: Press MFB Once
• Reject a Phone Call: Press MFB for 2 seconds.
• Music Play/Pause: Press MFB once
• Next Song: Press “+” button once.
• Previous Song: Press “-” button once.
• Volume Up: Long Press “+” button.
• Volume Down: Long Press “-” button.
• Modes: Press power button once for Bluetooth & Aux mode.

Note:

MFB stands for Multi-function Button | Play/Pause button is MFB.

Charging the Speaker:

1.  Connect the Micro USB cable to soundbar.
2.  Connect the USB end of the Charging cable to a Power Source such as USB Charger or other Charging Devices of 5V Output.
3.  Red LED light will be steady if the speaker is OFF during charging. Even after the speaker is fully charged, Red LED light will be steady red.
4.  If the speaker is ON during charging then Blue LED light will be steady throughout the charging time.

Troubleshooting Scenario 1 – Connectivity Issue

1.  Turn OFF the Speaker and charge 100%.
2.  Un-pair with the connected Bluetooth device.
3.  Restart the Bluetooth device.
4.  After 100% charging switch ON the soundbar and pair it with the Bluetooth device again.

Disclaimer

The colors and specifications shown mentioned in the user manual may differ from the actual product. The images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>