DOMO DO9079K Robot Machine Purchase, cheap User Manual

DOMO DO9079K Robot Machine Purchase, cheap

WARRANTY

This appliance has a two-year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty.

If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it.

RECYCLING INFORMATION

This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it must be brought to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. The packaging is recyclable. Please treat the package ecologically.

From now on, accessories and parts of Domo appliances can also be ordered online from the Domo webshop*:
http://webshop.domo-elektro.be.

You can reach the webshop through the Domo website as well: www.domo- elektro.be. The accessories and parts can also still be obtained at the store where you bought the appliance.

• Only in Belgium, the Netherlands, Luxemburg, France, and Germany.

If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken, including the following:

• Read all instructions carefully. Keep this manual for future reference.

• Make sure all packaging materials and promotional stickers have been removed before using the appliance for the first time.

• Make sure children cannot play with the packaging material.

• This appliance is intended to be used in household and similar applications such as:

  • staff kitchen areas in shops, offices, and other working environments;
    farmhouses;

  • by clients in hotels, motels, and other residential-type environments;

  • bed and breakfast type environments.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• This appliance can be used by children aged 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.

• Keep the appliance and its cord out of reach of children younger than 16 years.

• The appliance must be disconnected from its power source when not in use, during service, and when replacing parts. Allow cooling before putting on or taking off parts, and before cleaning the appliance.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• CAUTION: In order to avoid a hazard this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

• Care is needed when handling the blades of the blender and food processor, especially when removing the blades from the device.

• Never leave the appliance unattended while it is functioning.

• Do not use or store this appliance outdoors.

• Do not use this appliance for other than intended use.

• Check carefully that the voltage and frequency of the power net match the indications on the rating label of the appliance.

• The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local standards and requirements.

• Only use the utensils delivered with the appliance.

• Do not operate this appliance with a damaged cord or plug or in the event the appliance malfunctions or has been damaged in any manner. Return the appliance to the DOMO Service Department or its service agent for examination, repair, or electrical or mechanical adjustment. Do not try to repair the appliance yourself.

• To protect against electrical shock or burns, do not immerse the unit, cord, or plug in water or other liquid.

• Do not operate the appliance with wet hands.

• A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. DO NOT USE WITH AN EXTENSION CORD.

• Unwrap the cord completely to prevent overheating of the cord.

• Do not let the power supply cord hang over the edge of a counter, or touch hot surfaces.

• Do not allow the power cord supply to run underneath or around the unit.

• Make sure the appliance is correctly assembled, then plug the cord into the wall outlet. To disconnect, turn the controls to the “OFF” or “0” position, then remove the plug from the wall. Never pull the cord or appliance to remove the plug from the socket.

• Do not use the appliance if there is any water in it or if the parts are still wet after cleaning.

• Do not use the appliance without ingredients.

• Handle with great care when using sharp accessories like knives. Only touch the accessories when they stopped moving inside the appliance.

• Failure to maintain this appliance in a clean condition could adversely affect the life of the appliance and possibly result in a hazardous situation.

• Any injury or damage caused by failure to comply with these rules is at your own risk. Neither the manufacturer, importer, nor supplier may be held liable.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

PARTS

1. Stainless steel mixing bowl: 6.7 l

2. Transparent bowl lid with the fill opening

3. Cover of connection for A accessories

4. Connection for A accessories (beneath cover): for the vegetable slicer, meat grinder, and pasta accessories (sold separately).

5. Lever for unlocking A accessories

6. Multifunctional head

7. Cover of connections for B and C accessories

8. Connection for B accessories (beneath cover): for a food processor (sold separately)

9. Connection for C accessories (beneath cover): for blender (sold separately)

10. Button for unlocking the multifunctional head

11. Speed control: 0-7 + pulse

12. Balloon whisk

13. Mixer

14. Dough hook
    Sold separately

15. Blender

16. Meat grinder

17. Vegetable slicer

18. Pasta accessories: spaghetti, tagliatelle, lasagna

19. Food processor

20. Juicer

21. Potato peeler

BEFORE THE FIRST USE

• Remove the appliance and the accessories from the packaging.
• Clean all parts in warm soapy water and dry thoroughly.
• Never immerse the motor unit in water to avoid electrocution.

ASSEMBLY & USE

Balloon whisk/mixer/dough hook
Depending on the nature of the ingredients, the mixing bowl can make 2.3 kg of dough.

1. Give the unlocking button a quarter turn to unlock the multifunctional head. Then push the head upwards until you hear a click.
2. Place the mixing bowl on the base and lock it into place by turning it clockwise. Put the ingredients into the bowl.
3. Attach the transparent lid to the head, with the fill opening at the front. Push the 2 clips on the lid into the 2 grooves in the multifunctional head, so that the lid stays into place.
4. Attach the accessory you would like to use: balloon whisk, mixer or dough hook.
   • A. Slide the accessory with its 2 pins into the 2 grooves in the slot of the head.
   • B. Push the accessory upwards and give it a quarter turn counterclockwise.
   • C. Let go of the accessory so that it falls into the locking position.
5. Turn the unlocking button back with a quarter turn so that the multifunctional head moves downwards. Push the head back into its original position until you hear a click.
6. Place the appliance on a level, clean and dry surface. Plug in the stand mixer and select the desired speed by turning the speed control knob from position 1 to 7. For a quick start and stop you can turn the knob to P – the pulse function. Hold the knob in the P position to mix and let go of the knob to stop mixing.
7. During preparation, you can add ingredients through the fill opening in the lid. You can close off the fill opening with a separate lid.
8. To switch off the stand mixer, turn the speed control knob to position 0.

Note:
The balloon whisk/mixer/dough hook is adjustable in height. Turn the nut loose counter-clockwise and adjust the height of the accessory to your liking by turning the pins. Then turn the nut clockwise until its set tight, this to set the height you chose.

DISASSEMBLY

1. Remove the plug from the socket.
2. Give the unlocking button a quarter turn to unlock the multifunctional head. Then push the head upwards until you hear a click.
3. Push the accessory upwards, out of the locking position and give it a quarter turn clockwise. Slide the accessory out of the slot and remove it from the head. Be careful while doing this.
4. Remove the lid from the head.
5. Turn the bowl counterclockwise out of the locking position and remove the bowl.
6. Give another quarter turn to the unlocking button so that the head falls down. Push the head back into the original position until you hear a click.

OPTIONAL: BLENDER DO9072KR-BL
Depending on the nature of the ingredients, the blender can mix 1.4 l.

1. Make sure that the sealing ring is in place in the blade assembly and lock the blade assembly onto the bottom of the glass jar by turning it counterclockwise.
2. Place the multifunctional head into its horizontal position and remove the cover of the connections at the top of the head.
3. Put the ingredients into the jar and close the jar with the lid, including the measuring cup in the fill opening.
4. Place the blender onto the right connection and lock it by turning it clockwise.
5. Use the speed control to blend.
6. During blending, you can remove the measuring cup from the fill opening and add ingredients through the fill opening. Always close the opening afterward with the measuring cup.

Caution:

• Do not use the blender empty.
• Never fill the jar with boiling liquids. Always let them cool down to room temperature.
• If you want to crush ice, never use more than 9 ice cubes (4x4x2cm) at once.

CLEANING

1. Remove the plug from the socket before cleaning the appliance.
2. Never immerse the motor unit in water or never keep it under running water. Clean the motor unit with a soft, damp cloth.
3. Disassemble all the accessories.
4. Clean all the accessories, rinse them and dry them thoroughly. You can also clean the accessories in the dishwasher, except the blender and the balloon whisk.
5. Cleaning the blender: pour warm water with a few drops of washing-up liquid into the blender jar. Close the lid. Connect the blender to the stand mixer and mix a few times using the pulse function. Remove the blender from the stand mixer, rinse the jar under running water and let it dry upside-down.

OPTIONAL: VEGETABLE SLICER DO9070KR-V
Turn the device off, and take the plug out of the socket before you add, remove or clean any accessories.

1. Open the lid at the end of the multifunctional head of the stand mixer: lift the lid upwards and remove it.
2. The connecting point for accessories can now be seen.
3. Place the vegetable slicer at an angle of 25 ° to the connection point and tighten it by making a quarter turn clockwise. You hear a click when it is securely fastened. Your vegetable slicer is now in a perfectly vertical position.
4. Push the grater fully into the opening of the vegetable slicer. You can choose between a slicer, a fine grate and a rough grate.
5. Control the vegetable slicer with the speed control knob of the stand mixer.
6. With the pushing rod, you can safely place vegetables in the vegetable slicer.
7. To remove the vegetable slicer, pull the release lever (see picture) and make a quarter turn clockwise on the vegetable slicer.
8. Remove the vegetable slicer and replace the lid on the connection.
9. Clean all parts thoroughly and dry them carefully before using them again.

OPTIONAL: MEAT GRINDER DO9070KR-M
Turn the device off, and take the plug out of the socket before you add, remove or clean any accessories.

1. Open the lid at the end of the multifunctional head of the stand mixer: lift the lid upwards and remove it.

2. The connecting point for accessories can now be seen.

3. Place the meat grinder at an angle of 25 ° to the connection point and tighten it by making a quarter turn clockwise. You hear a click when this is securely fastened. Your meat grinder is now in a perfectly vertical position.

4. For grinding meat insert in succession: the worm wheel and the cutting knife.

5. Then make a selection from the grinding discs, fine, medium or coarse.

6. Position the notch on the disc at the height of the projecting catch.

7. Connect it all together with the screw ring.

8. You can place the tray on top of the meat grinder to easily place the meat.

9. You can use the push rod to put the meat firmly inside.
   For sausage making, insert the following components:
   For making stuffed meatballs insert the following components:

10. To remove the meat grinder, pull the release lever (see picture) and make a quarter turn clockwise on the meat grinder.

11. Remove the meat grinder and replace the lid on the connection.

12. Clean all parts thoroughly and dry them carefully before using them again.

CLEANING
Do not use the dishwasher for cleaning the meat grinder.

OPTIONAL: PASTA ACCESSORIES DO9070KR-S, -T, -L
Turn the device off, and take the plug out of the socket before you add, remove or clean any accessories.

1. Open the lid at the end of the multifunctional head of the stand mixer: lift the lid upwards and remove it.

2. The connecting point for accessories can now be seen.

3. You can choose between a spaghetti slicer (1), a tagliatelle slicer (2), and a lasagna roller (3).
   Attention: Before making spaghetti or tagliatelle, you need to use the lasagna roller first to make flat pasta sheets.

4. Place the accessory at an angle of 25 ° to the connection point and tighten it by making a quarter turn clockwise. You hear a click when it is securely fastened. Your pasta accessory is now in a perfectly vertical position.

5. Control the pasta accessory with the speed control knob of the stand mixer.

6. To remove the pasta accessory, pull the release lever (see picture) and make a quarter turn clockwise on the accessory.

7. Remove the accessory and replace the lid on the connection.

8. Clean the pasta accessories with a damp cloth and wipe them dry. Do not immerse in water or use dishwasher cleaning.

PREPARATION OF PASTA

Basic recipe

• 500 grams of flour

• 4 eggs

• a pinch of salt

• 2,5ml oil

• Optionally water
  For whole-wheat pasta replace the regular flour with whole-wheat flour. For pasta, Rossa replaces one egg with 75g tomato paste.

• Put the ingredients in the bowl.

• Mix with the dough hook n speed 1-2 for 2 to 3 minutes. Add water if the dough is too dry.

• Stop your food processor and knead the dough by hand until it is smooth.

• Let it rest in a kitchen towel for 15 minutes.

• Put the pasta roller into the connector for accessories.

• First, use the pasta roller to make flat sheets of pasta as for lasagna making.

• Enter these pasta sheets through the pasta cutter for spaghetti or tagliatelle.

• Fill a large pan full of water with a pinch of salt.

• Add some olive oil in order to prevent the pasta stick together

• Bring water to a boil and add the pasta. Let simmer for 2 to 4 minutes depending on your personal preference.

OPTIONAL: FOOD PROCESSOR DO9072KR-F

PARTS

1. Fill the opening with a food pusher
2. Lid
3. 3 l bowl
4. Axis
5. Disc for cutting fries (sticks)
6. Fine grate
7. Rough grate
8. Disc for slices

USE

1. Make sure that the stand mixer is switched off and unplugged.
2. Make sure that the multifunctional head of the stand mixer is in its horizontal position and remove the cover at the top of the head.
3. Make sure that the axis of the food processor is well assembled into the bowl, through the opening at the bottom. Place the food processor bowl on the left connection and lock the bowl by turning it counterclockwise.
4. Slide one of the discs over the top of the axis. Always only use 1 disc at a time!
5. Place the lid on the bowl and lock the lid by turning it counterclockwise.
6. Plug in the plug of the stand mixer.
7. Add the ingredients through the fill opening. Use the food pusher to evenly press the ingredients into the bowl. Use the speed control of the stand mixer to operate the food processor.
8. Switch off the stand mixer after use.

Caution:

• Use fresh ingredients and be sure not to cut them up into pieces that are too small.
• Never put your fingers in the fill opening.
• Be careful, the discs (blades) are sharp.

CLEANING

• Disassemble the food processor: remove the food pusher, unlock the lid and remove it from the bowl, remove the blade disc and push the axis out of the bottom of the bowl.
• Clean all parts, except for the axis, in warm water with some washing-up liquid. Dry all parts thoroughly.
• If necessary, clean the axis with a slightly damp cloth and dry thoroughly.

OPTIONAL: POTATO PEELER DO9072KR-P

PARTS

1. Bowl
2. Lid
3. Revolving disc

USE

Caution:
Also always follow the instructions in the instruction manual of the DO9072KR or DO9079KR stand mixer.

Tip:
First, let the potatoes soak in water for a while.

1. Make sure that the stand mixer is switched off and unplugged. Place the appliance on a flat, clean, and dry surface.
2. Give a quarter turn to the unlocking button to unlock the multifunctional head of the stand mixer. Push the head upwards until you hear it click.
3. Place the revolving disc into the bowl and add potatoes to the bowl – max. 1 kg.
4. Add water, until the potatoes are underwater, with a maximum of 2 l.
5. Put the lid onto the bowl and turn until it locks.
6. Place the potato peeler onto the base of the stand mixer and turn counterclockwise to lock. Give a quarter turn to the unlocking button so that the head falls down. Push the head into its original horizontal position until it clicks.
7. Plug in the plug of the stand mixer and select the desired speed by turning the speed control. The maximum speed to use for peeling potatoes is speed 4.
8. To turn off the stand mixer, set the speed control to position 0.
9. Remove the plug from the socket.
10. Turn the unlocking button a quarter and push the head upwards until it clicks.
11. Turn the bowl of the potato peeler clockwise to unlock and remove the bowl.
12. Turn the unlocking button a quarter so that the head falls down. Push the head back into its original horizontal position until it clicks.

CLEANING

• Disassemble the potato peeler: remove the lid from the bowl by turning and removing the revolving disc.
• Wash all parts in warm water with some washing-up liquid. Dry all parts thoroughly.

OPTIONAL: JUICER DO9079KR-J
Turn the device off, and take the plug out of the socket before you add, remove or clean any accessories.

1. Open the lid at the end of the multifunctional head of the stand mixer: lift the lid upwards and remove it.
2. The connecting point for accessories can now be seen.
3. Place the juicer at an angle of 25 ° to the connection point and tighten it by making a quarter turn clockwise. You hear a click when this is securely fastened.
4. Unwind the electrical cord and plug in the unit.
5. Place a glass or bowl under the juice outlet for the juice.
6. Cut the fruit in the center.
7. Press down the juice outlet for opening and the juice can flow out.
8. Place the fruit on the head and press it down. Press for 15 sec. then let the unit rest for 15 sec.
9. Click the juice outlet before removing the glass. Now the drips cant flow out anymore.

CLEANING

• Disassemble the juicer.
• Wash all parts in warm water with some washing-up liquid. Dry all parts thoroughly.

DOMO Webshop

ORDER
The original Domo accessories and parts are online at: webshop.domo- elektro.be.

LINEA 2000 – Dompel 9 – 2200 Herentals Belgium – Tel 014/21.71.91 – Fax : 014/21.54.63.

References

• Elektrozine.be | We really love high tech
• www.ELEKTROKOLA.cz - Crussis, Ghost, Kellys, Leader Fox, Pells, Specialized - doprava zdarma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>