marta MT-IH2582A Infrared Heater User Manual

: June 9, 2024
: MARTA

Table of Contents

marta MT-IH2582A Infrared Heater
Parts list
BEFORE THE FIRST USE
USING THE APPLIANCE
CLEANING AND MAINTENANCE
SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

marta MT-IH2582A Infrared Heater

marta-MT-IH2582A-Infrared-Heater-product-image

Parts list

marta-MT-IH2582A-Infrared-Heater-1

Housing
Protective mesh
Quartz heating elements
Reflector
Mode control
Carrying handle
Water tank hatch
Tip over switch

CAUTION
Read this manual carefully before using the appliance and save it for future reference. When using electrical appliances, basic precautions should always be followed, including the following:

Before the first use, check the device specifications and the power supply in your network. Use the appliance only on the voltage specified on the identification plate.
It is not intended for industrial use. When store your heater, keep it in a cool, dry place.
Use the device in a well ventilated room with at least 1 meter of space on each side for normal air circulation and heat removal.
The appliance should never be used under conditions where it may be immersed, or come in contact with water. Similarly do not plug in the appliance if its surfaces are damp.
Do not allow the operating device to come into contact with fusible or flammable materials, fabrics, curtains, etc.
For indoor use only. Use only for domestic purposes according to the instruction manual. Do not use or store the unit in damp and moist areas where it may come in contact with water.
Do not place or use the unit on or near other household appliances (a hot gas or electric burner, etc.). To avoid a circuit overload, do not operate
Do not use the appliance near explosives or flammable materials and easy deformed objects.
Do not use with damaged cord, plug or other injuries. Do not move the device by holding the cord.
Keep the power cord away from sharp edges and hot surfaces. Do not pull the cord. Always take the socket not the wire. Do not reel the cord around the device housing.
Never attempt to frame and repair the appliance by yourself. If you meet problems or if it has been dropped, or damaged in any manner, please contact the nearest customer service center.
Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
Place the appliance on a flat, stable and heat-resistant surface that can support the weight of the appliance.
Incorrectly assembled device may cause fire, electric shock or other injury.
NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after having not been used for a long period of time the heater may emit some smell and fumes. This will disappear after a while.
DANGER: Do not cover the device with anything while it is in operation! Do not place any objects on it!
To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
Do not touch the appliance, the power cord and the plug with wet hands! Do not insert and pull out the plug by wet hands, as this may cause electrical shock.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Keep out of the reach of children. Close supervision is required when any appliance is used by or near children.
Maximum allowable continuous operating time is 4 hours.
Unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use. Unplug heater by grasping plug and pulling it from the outlet. NEVER YANK ON CORD.
Danger of electric shock exists even when the appliance is switched off. ALWAYS unplug the unit when not in use.
WARNING: This device heats up during use. The temperature of surface may be exceeded when the appliance is in operation. The heater must always operate in vertical position.
Do not touch the hot surfaces or heating elements inside to avoid burns. Use handle, regulator and knob.
WARNING: Failure to observe safety precautions may result in fire, electric shock, or burns. Damage to the appliance caused by improper use will exempt the seller from warranty service.

BEFORE THE FIRST USE

Unpack the appliance and remove all packaging materials and labels. Store warning labels (if available) and the product serial number plate on the housing!
Clean the device with a damp cloth, clean the accessories in soapy water rinse thoroughly and dry.

USING THE APPLIANCE

In order to avoid damage to the device, nothing should interfere with its operation and heat dissipation. Provide a free space of at least 1 meter on each side of the device.
Use of the device is allowed only in the assembled state, in a horizontal position with the handle up. Use in an inverted position is prohibited!
The heater has an air humidification function, thanks to which optimal humidity is maintained.
To fill the water tank, open the lid (7). Do not use the appliance without water, it may damage the appliance. Do not allow the water tank to be emptied. Before adding water to the reservoir, turn off the appliance and disconnect it from the electrical network. Top up the water until it completely evaporates. The water level is conveniently monitored on a scale on the side of the heater. DO NOT FILL THE TANK ABOVE THE “MAX” MARK.
When using the humidification function, the tank lid must be open.
To avoid burns, do not bring your hands to the lid for filling water and steam output when the oborgevatel is hot!
The built-in fan distributes the heated air both forward and backward of the heater for faster and more uniform heating of the room.
Before connecting the device to the power supply, set the operating mode switch (5) to the “0” position (OFF/OFF).
Connect the plug of the appliance’s power cord to the mains.
To turn on the heater, turn the operating mode switch (5) to one of the positions:
“I” position (1) to turn on the heating at minimum power without using a fan.
“II” position (2) to turn on the heating at maximum power using the fan.
DO NOT USE THE DEVICE FOR MORE THAN 4 HOURS WITHOUT INTERRUPTION.
To turn off the device, set operating mode switcher to the “0” position (OFF/OFF), then disconnect the device from the power supply.

OVERTURN PROTECTION SYSTEM:
The heater is equipped with tip over switch. If the heater is accidentally dropped, the heater will automatically switch off. Put the fan-heater back to the vertical position to switch it on.

CLEANING AND MAINTENANCE

Switch off the appliance and unplug it from the power supply and allow cooling down. Wipe the outside of the appliance with a soft damp cloth. Clean the air inlet/outlet grilles regularly.
Do not immerse the appliance in water or other liquids. Do not use any detergents or abrasives and do not allow any water to enter the heater.
When the heater is not used for long periods of time it should be protected from dust and stored in a clean dry place.

SPECIFICATION

Power supply 230 V ~ 50 Hz
Max power, W. 2000
Net weight / Gross weight, kg 1,30 / 1,55
Package size (L х W х H), mm 448x160x364

Producer:
COSMOS FAR VIEW INTERNATIONAL LIMITED
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China Made in China

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device. Current information about service centers is available on the website www.multimarta.com