LA CROSSE TECHNOLOGY WT-3161BKX1 16 Inch Atomic Wall Clock User Manual
- June 9, 2024
- LA CROSSE TECHNOLOGY
Table of Contents
WT-3161BKX1 16 Inch Atomic Wall Clock
User Manual
Model: WT-3161BKx1
DC: 100522
For information about WWVB, atomic time signal visit:
http://bit.ly/AtomicTime
POWER UP
-
Select Time Zone and DST settings.
-
Insert one, two, or three batteries into the Battery Compartments.
-
The hands will move to the 12 o’clock position and search for the WWVB Atomic Time Signal for up to 10 minutes.
• If no signal after 8-10 minutes, the clock will run from 12:00.
• Allow up to 5 nights to receive this transmission, the clock will continue to search for the WWVB signal on its own. -
For the best reception, place the clock on an exterior wall near a window with the front or back of it facing Fort Collins, CO.
Watch the setup video:
bit.ly/wallclock_setup
Note: In certain areas, this clock may not be able to receive the WWVB
reception due to signal strength or interference.
In this case, your clock can be set manually until the Atomic Time Signal can
be received.
MANUALLY SET TIME
Hold the SET button for about 3 seconds.
- Press & Hold SET to move hands quickly.
- Press & release SET to move hands step by step.
Note: The Atomic Time Signal will override manual settings.
Reset: If the clock does not respond when trying to manually set your time, press the RESET button.
- SET
- WAVE (Atomic search)
- RESET
- Battery Compartment
- Time Zone Selector
- Daylight Saving Time Selector
SPECIFICATIONS
Battery Requirement: 1 AA (IEC LR6) in any compartment.
Not Included.
Battery Life:
1 Battery: Up to 2 years
2 Batteries: Up to 4 years
3 Batteries: Up to 6 years
Dimensions: 16” Diameter
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback on our social
media outlets!
References
- Radio Station WWVB | NIST
- YouTube
- Patents – La Crosse Technology
- Warranty – La Crosse Technology
- P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>