iBOLT IBBZ-33921 TabDock Bizmount AMPs User Guide
- June 9, 2024
- iBOLT
Table of Contents
iBOLT IBBZ-33921 TabDock Bizmount AMPs
Specifications
- Product Dimensions: 6 x 4 x 10 inches
- Item Weight: 8 ounces
- Special features: Rotatable, Adjustable
- Other display features: Wireless
- Compatible Devices: Tablets
- Mounting Type: Wall Mount, Dashboard, Drill Base AMPS Pattern
- Brand: IBOLT
Introduction
A mounting solution called TabDock Bizmount AMPs Heavy Duty Drill Base Mount is made to firmly fasten tools and equipment to a drill press. It is perfect for usage in a range of applications because it is constructed from high- quality materials and works with AMPs patterns. The Bizmount AMPs Heavy Duty Drill Basis Mount gives the tool a sturdy base and works to lessen vibration while it is in use.
INCLUDED PARTS
-
22158 BIZMOUNT 4″ SHAFT
-
21227 25mm Ball to AMPS Plate
-
21249 4 Screw & Nut Pack
-
21248 – VHB Adhesive
-
21226- 25mm Ball to 4 Prong Adapter
-
21110 TabDock Tablet Holder -BULK
-
Attach the bizmount to the ball joint of the AMP mount.
-
Mount the tablet holder to the bizmount’s prongs .
-
Use the included screws to mount the AMPS plate to the desired surface area.
-
Loosen the knob to adjust both the prongs and the body of the biz.
-
Prong can be adjusted up to 180. The head can also twist at 360 to further adjust your tablet’s position.
The bizmount can rotate a full 360.
Safety Precautions
- Do not install iBolt products over an air bag cover or an air bag deployment zone.
- iBolt. is not responsible and assumes no liability for injury or death as a result of a car crash and/or airbag deployment.
- IBolt is not responsible for any damages caused to your vehicle, your device, or yourself due to the installation or use of this product.
The latch on the back of the TabDock holder can be lifted to adjust the bottom bracket of the holder to increase of decrease the capacity of the TabDock from 7″-10″.
-
Insert 4 prong adaptor into the TabDock 4 hole patter.
-
Push the adaptor upward into the TabDock holder until it snaps into place.
- The adaptor is secured in place when you see the hole pattern exposed at the bottom.
Frequently Asked Questions
What is the weight capacity of the Bizmount AMPs Heavy Duty Drill Base Mount?
The Bizmount AMPs Heavy Duty Drill Base Mount can hold up to 5 pounds.
How do I adjust the prongs?
Loosen the knob to adjust both the prongs and the body of the biz.
What are the required tools to mount my device?
The Bizmount AMPs Heavy Duty Drill Base Mount requires a drill with a 1/4″ bit.
What are the dimensions of the Bizmount AMPs Heavy Duty Drill Base Mount?
The Bizmount AMPs Heavy Duty Drill Base Mount is 6 x 4 x 10 inches.
Does this fit the 10.5-inch Galaxy Tab S5e?
The Samsung Galaxy Tab Se works with the holder, so the answer is yes.
Would this mount be able to support two 10 inch tablets side by side?
Yes, provided that the tablet’s height does not exceed 8″.
Will my 7-inch tablet fit in there?
Yes, this will fit 7″ tablets. Place your tablet horizontally in the holder and secure it. From there, you can tilt your tablet vertically or 360 degrees.
Can you suction mount this to the dash without using screws?
No, and even if it were, the suction mount would be far too hefty. This workshop-grade tablet mount is incredibly sturdy. It has a double-sided tape mount option that would be suitable for a car dashboard, but in my experience, it performs best when screwed or bolted to a surface. It is sufficiently hefty on its own to remove suction cups.
Does the galaxy tab A7 SM500 case fit?
The arms can only support objects that are up to 3/4″ thick, however the size of the tablet is appropriate with this holder.
Fits a Samsung Tab A 8.4 will this “using case?
This will work with the Samsung Tab A 8.4 without a problem “. Please be aware that the cradle can support objects up to 3/4 of an inch thick.
If the Samsung Galaxy Tab A(2019) has a case on it, can this suit it?
The Samsung Tab A 2019 will fit, and it is one of the most widely used tablets with this mount. You place it horizontally, secure it with a clamp, and then rotate it to the appropriate position.
Will the mount fit a dash that is 30% angled? Subaru npr
To attach the mount, you will need a level area of 2 inches by 1.75 inches. This mount will work just well on a flat or slightly slanted surface.
Video
iBOLT IBBZ-33921 TabDock Bizmount AMPs