BURY 15WWLC Wireless Charger User Manual

BURY 15WWLC Wireless Charger

Approval and declaration of conformity

This device complies with Part 15 of the FCC Rules and with RSS-210 and RSS- Gen of the Industry Canada Rules.Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

NOTICE:
Changes or modifications made to this equipment not expressly approved by BURY GmbH & Co. KG may void the FCC authorization to operate this equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Wireless phone charging

• The wireless charging function can be activated in the PCM (availability dependent on country and equipment).
  CAUTION
  Metallic objects in the phone tray

• Metallic objects located between the phone and the charging pad during wireless charging can become extremely hot and may cause injuries or material damage.

• Do not place the charging
  CAUTION
  Heat generation during wireless charging

The phone can become very hot when charged wirelessly.

• Pay attention to the temperature when removing the phone.
  • The function is activated in the PCM.

  * Wireless charging according to the Qi standard  

supported by the phone.

• Place the phone with the back side on the indi- cated surface in the phone tray.
  • The symbol appears in the PCMstatus bar if the function is activated or is charged wirelessly.
• The charging power may vary depending on the phone.

INFORMATION

• At high temperatures on the phone or in the vehicle, the charging functions of the phone may be restricted or functions may no longer be carried out. The cellphone case used and active apps can influence the charging functions.

• An alternating magnetic field is used during wireless charging. Interactions are possible, such as iritation of the sensory organs or malfunction of active im- plants (e-g. pacemakers, infusion pumps or neurosti mulators) or interference with passive implants (e.g. artificial joints).

  • Keep a minimum distance of 3.94 inches away from the charging surface,
    The limit values for long-term exposure according to ICNIRP1998 are fulfilled at this distance.

  • If you are an implant carrier, please consult a medical specialist if you have any questions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>