WiMo PicoAPRS V4 Transceiver User Guide
- June 9, 2024
- WiMo
Table of Contents
WiMo PicoAPRS V4 Transceiver User Guide
Introduction
The screen ist not a touchscreen. „On screen buttons“ just describes the button funktions for the LEFT and RIGHT direction of the 5-way button.
- To Power ON your PicoAPRS, press & hold PTT for 3 seconds.
- To Power OFF, press „MENU“ (left button) and select „Power OFF“ Menu item.
- To charge, connect a USB-C power source. PicoAPRS will charge even in OFF state but will not show an charging indicator on screen when power is off.
Parts Description
Your PicoAPRS starts in „2m APRS“ mode.
-
To set your Callsign, SSID, APRS icon, your APRS comment and so on, press „SET“ (right button) while you can see the main screen (see example picture on left).
-
To change the device mode, press „MENU“ (left button) while you can see the main screen (see example picture on left). Navigate with the 5 way button to „Settings“. In Settings menu, you can change the device mode and another settings of your device.
-
To set your FM-Voice frequency and another mode related settings, press „SET“ (right button) while you can see the main screen (see example picture on left).
The arrows indicate that the UP & Down buttons have functions.
In FM-Voice mode, you can change the speaker volume.
Support
To download a full user manual, visit
http://picoaprs.de/downloads.php
or scan QR code:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>