anko 43233274 Portable Party Speaker User Manual
- June 9, 2024
- Anko
Table of Contents
Bluetooth® Party Speaker with
RGB Lights
User Manual
What’s Included:
Wireless Speaker x 1
Micro USB Charging Cable x 1
AUX in cable x 1
User Manual x 1
43-233-274
Warning
-
Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
Risk of explosion if battery is replaced by an Incorrect type. Dispose of used battery according to the instructions.
Replacing battery with an incorrect type will bypass built-in safeguards. -
Disposal of a battery into fire, or mechanically crushing or cutting a battery could result in an , explosion.
, Leaving a battery in an extremely high temperature surrounding environment could result in an explosion.
A battery subjected to extremely low air pressure could may result in an explosion or the leakage of flammable liquid or gas. -
Do not expose the device to direct sunlight, heat or flame.
Damage, shock, and/or injury can occur if these warnings are not heeded.
Device may become warm while charging.
Make sure you always turn the product off and the power outlet off completely before unplugging the product.
Make sure the product has plenty of ventilation. -
Do not press the buttons too hard as it could damage the product.
-
Only use dry cloth to keep product clean from dust.
Never try to repair this product yourself. take it to a certified technician. Trying to remove panels or repairing the unit yourself could lead to electric shock. When the unit is not in use. make sure it is correctly turned off and stored in a cool dry place. -
Do not insert foreign objects into the product.
Avoid dropping the product. as harsh impacts could damage the product.
Function Overview
Power ON/OFF:
Press and hold ON/OFF button. LED lights will flash.
Bluetooth Mode:
- Once the unit is powered on, will automatically enter to Bluetooth mode.
- Search for KM43233274 and connect from Bluetooth menu on the media device.
- Once unit is successfully paired and connected, you will hear a prompt tone.
Pause and Resume Playback:
Press Play/Pause button to start playback or pause music from your media
device.
Skip Track:
Press Plus or Minus button once to skip the track.
Adjusting the Volume:
Press and hold the Plus or Minus button to increase and decrease the speaker
volume.
AUX Function:
Use a 3.5mm Aux-in coble to connect your device through the AUX in port.
USB Operation:
Insert the USB drive into the USB port. You will hear a sound. The speaker
will play the music from the USB drive automatically.
Music support format: MP3/WMA/WAV/FLAC/APE
NOTE: USB port does not support USB charging for external device.
Micro SD Card Function:
- Plug the Micro SD card into the slot and play music via your media device.
Music support format: MP3/ WMA/WAV/FLAC/APE
Mode Change:
Press Mode button to change the function when more than two modes are used at
the same time.
Receiving and Ending Calls:
In Bluetooth mode the speaker will automatically pause the playback when there
is an incoming call.
- To answer/hang up the call. press the Play/Pause button. To reject the call. press and hold the Play/Pause button for 2 seconds.
Double press Play/Pause to redial the last dialed number.
Battery Charging:
Please use provided USB cable for charging. Plug one side to the USB port of
the unit and the other side connect with the PC. wall charger or other 5V
charging devices.
The indicator will be red on charging and will be off after full charged.
Do not use the unit when charging.
TWS Pairing (for Bluetooth mode only}:
- After confirming that the two speakers are in Bluetooth mode, press and hold the LED light button 2 seconds for either speaker to enter TWS pairing for automatic connection; after the successful connection, you will hear prompts from the two speakers; after the first successful pairing connection, the two speakers will perform pairing connection automatically if both of them are powered on.
- After the successful pairing connection, gou can search KM43233274 from source device and connect.
- If either of them is operated, the other will perform the same operation, such as light changes, switching songs. volume up/down. Play/Pause and power-off; you also can control the volume up/down, switching songs, Play/Pause from source device.
- Disconnect pairing connection: In pairing connection mode, press and hold the LED light button 2 seconds for either speaker to disconnect and then the current speaker with Bluetooth connection will keep working, and the speaker without connection will go into standby mode.
- Re connection after disconnection: After the TWS pairing connection is disconnected, press and hold the LED light button 2 seconds on disconnected speaker to re-enter TWS pairing and re-connect the other speaker automatically (both speakers should be in Bluetooth mode).
Notes on TWS pairing connection:
TWS pairing will not work if either speaker is already connected to a
Bluetooth source device.
Please disconnect the speakers first before TWS pairing.
Specification
- Loudspeaker: 5Wx2
- Bluetooth Version: 5.2
- Frequency: 100Hz-20kHz
- Working Voltage: 5V
- Working Distance: 10m
- Play Time: 1-2hours
- Charging Time: 2-3hours
12 month warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above. from the date of
purchase. provided that the product is used in accordance with the
accompanying recommendations or instructions where provided. This warranty is
in addition to your rights under the Australian Consumer Law. Kmart will
provide you with your choice of a refund, repair or exchange (where possible)
for this product if it becomes defective within the warranty period. Kmart
will bear the reasonable expense of claiming the warranty. This warranty will
no longer apply where the defect is a result of alteration, accident, misuse,
abuse or neglect. Please retain your receipt as proof of purchase and contact
our Customer Service Centre on 1800 124125 (Australia) or 0800 945 995 (New
Zealand) or alternatively, via Customer Help at kmart.com.au for any
difficulties with your product. Warranty claims and claims for expense
incurred in returning this product can be addressed to our Customer Service
Centre at 690 Springvale Rd, Mulgrave Vic 3170. Our goods come with guarantees
that cannot be excluded under the Australian Consumer Law. You are entitled to
a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. For New Zealand customers, this
warranty is in addition to statutory rights observed under New Zealand
legislation.
WARNING
- Do not dispose of unit in fire or water. Never attempt to disassemble and reassemble. Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority for recycle advice.
- Keep your device and all accessories out of reach of children and animals. Small ports may cause choking or serious injury if swallowed. Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 40C).
- Extreme temperatures con cause deforming of the device and reduce the charging capacity and life of your device. Do not allow your device to get wet, liquids can cause serious damage. Do not handle your device with wet hands.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth® SIG, Inc., and any use of such marks by KMART AUSTRALIA is under
licence.
iPhone, iPad and Moc is a trademark of Apple Inc., registered in the U.S. and
other countries.
LASER At rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>