U-BOAT Chrono Titanio Smartwatch Instruction Manual
- June 3, 2024
- U-BOAT
Table of Contents
- Chrono Titanio Smartwatch
- WATCH OPERATION INSTRUCTIONS
- SETTING THE PRECISE TIME
- CHRONOGRAPH OPERATION INSTRUCTIONS
- INTERMEDIATE TIME FUNCTIONS
- ADJUSTING CHRONOGRAPH HANDS TO CORRECT POSITION
- BATTERY REPLACEMENT AND OIL ADJUSTMENT
- CARE AND MAINTENANCE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Titanio Smartwatch Instruction Manual
Chrono Titanio Smartwatch
Dear Customer
WE CONGRATULATE YOU ON THE PURCHASE OF THIS U-BOAT WATCH. IN THIS BOOKLET
YOU WILL FIND THE INSTRUCTIONS FOR USE.
WE KINDLY INVITE YOU TO REGISTER YOUR WATCH ON OUR OFFICIAL WEB SITE IN THE
U-Club – U-Boat (uboatwatch.com),
DEDICATED EXCLUSIVELY TO THE U-BOAT WATCHES OWNERS AND GAIN ACCESS TO FURTHER
BENEFITS AND PREVIEWS ON OUR LATEST NEWS, EVENTS AND OFFERS.
Quartz
WATCH OPERATION INSTRUCTIONS
A START AND STOP CHRONOGRAPH
B RESET CHRONOGRAPH
C SCREW CROWN
D HOUR HAND
E MINUTE HAND
F CHRONOGRAPH SECOND HAND
G SECOND HAND
H CHRONOGRAPH MINUTE HAND
I CHRONOGRAPH HOUR HAND
SETTING THE PRECISE TIME
- Unscrew the crown C and bring it into the position 3.
- Turn crown C to set the desired time.
- Screw down the crown C to put it back into position 1.
NB: we advise pulling out crown C into position 3 when the watch isn’t being used for a long period to limit battery consumption.
CHRONOGRAPH OPERATION INSTRUCTIONS
-
Press button A to start the chronograph.
Press button A again to stop the chronograph. -
Press button B to reset the chronograph.
INTERMEDIATE TIME FUNCTIONS
- Press button A to start the chronograph.
- Press button B to stop the chronograph and read the intermediate time while timing continues. Pressing button B lagain returns the chronograph hands to the current time recorded.
- 1 Start
2 Time reading
3 Restart
4 Time reading
5 Restart
6 Stop
ADJUSTING CHRONOGRAPH HANDS TO CORRECT POSITION
-
Unscrew the crown C and bring it into the position 3.
-
Press buttons A and B together for about 2 seconds.
Hand F will rotate through 360°. (IF FITTED)
Pressing button A returns hand F to the correct position. (IF FITTED)
Press button B to activate correction of hand I .
Press button A to return hand I to the correct position.
Pressing button B again activates correction of hand H .
Press button A to return hand H to the correct position. -
Screw down the crown C to put it back into position 1.
BATTERY REPLACEMENT AND OIL ADJUSTMENT
- Innovative closure system with a compartment for quick battery change. L
- Closing system for oil regulation in the case, exclusively by U-BOAT specialized technicians. M
CARE AND MAINTENANCE
- The precision mechanism in your watch will provide long-lasting performance when properly cared for.
- We recommend taking your watch to an Authorised Retailer/Authorised Service Centre every year for a check-up, perform ordinary maintenance on all mechanical parts and restore of water-resistance.
- We also advise taking your watch to an Authorised Retailer/Authorised Service Centre to change the strap.
- Avoid leaving your watch where it is exposed to large temperature variations, humidity, the sun and strong magnetic fields.
- Make sure the watch is in adequate conditions for water use/activities.
- Remember to rinse the watch after it comes into contact with seawater.
- Automatic watches require manual winding following a long period of inactivity.
OPTIMAL OPERATING CONDITIONS 0°/+60°C WHEN NOT WORK.
U-BOAT HEAD OFFICE
Via Pesciatina 751H
Gragnano, Capannori – 55010 Lucca – Italy
Tel: +39 0583 469288 – Fax: +39 0583 462249
www.u-boatwatch.com –
service@u-boatwatch.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>