Ornamental Mouldings 20508POLY White Polyurethane Accent Wall Moulding Instructions
- June 4, 2024
- Ornamental Mouldings
Table of Contents
DECORATIVE MILLWORK
A NOVO Building Products Company
Poly Panel Instructions
TOOLS NEEDED:
- Construction adhesive
- Fine sandpaper
- Utility knife or saw
- Caulk and Spackle
- Painters tape
- Chalk Line
- Measuring tape
- Level
- 100% Acrylic latex paint
INSTALLATION PREPARATION:
- Acclimate materials in the room for 24 hrs prior to installation.
- Read instructions before beginning.
- It is advisable to paint panels with 100% acrylic paint prior to installation. Joints can be filled with spackle, sanded, and touched up after installation if desired.
- You may find it helpful to tape the panels in place temporarily to determine your favorite arrangement. Mark the outline. Remove and proceed to install using the outlines for reference.
- Caulking may be indicated if the installation surface is uneven.
Installation Steps
-
Assure that the installation surface is smooth, clean, and dry.
-
Measure and mark a vertical line at the center of the installation surface. Note: pattern may be started from the top, bottom, or center.
-
Apply a small bead of adhesive to the back of the grid and place the grid on the wall aligning with your center mark.
Remove any excess adhesive. Secure in place with painter’s tape until cured.
Note: Small finishing nails may be used in lieu of tape. -
Continue installing panels end to end and side by side, leveling each as installed, and trimming as necessary.
FOR MORE INFORMATION VISIT ORNAMENTAL.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>