ACURA TLX Multi-View Rear Camera with Dynamic Guidelines Instructions
- June 9, 2024
- Acura
Table of Contents
ACURA TLX Multi-View Rear Camera with Dynamic Guidelines Instructions
About Your Multi-View Rear Camera
The audio/information screen can display your vehicle’s rear view. The display automatically changes to the rear view when the transmission is put into (R.
Multi-View Rear Camera Display Area
Not available on all models
About Your Multi-View Rear Camera
The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are.
Visually confirm that it is safe to drive before backing up. Certain conditions (such as weather, lighting, and high temperatures) may also restrict the rear view. Do not rely on the rearview display which does not give you all information about conditions at the back of your vehicle.
If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris
Guidelines appear when you put the transmission into (R. You can change the
Guidelines setting.
Customized Features P. 302
Off: Guidelines do not appear.
Fixed: Fixed Guidelines appear.
Dynamic: Guidelines that move according to the steering wheel direction
appear.
Both: Fixed guidelines and dynamic guidelines appear.
You can view three different camera modes on the rearview display. Swipe to highlight the view mode icon and click the A-zone touchpad to change the mode.
True Touchpad Interface P. 211
: Wide view mode
: Normal view mode
: Top down view mode
- If you were last using Wide view mode or Normal view mode, the same view mode will be activated the next time you put the transmission into (R.
- If you were using Top down view mode before you turned off the power system, Wide view mode will be activated the next time you set the power mode to ON and put the transmission into (R.
- If you were using Top down view mode and 10 seconds elapsed after you took the transmission out of (R, Wide view mode will be activated the next time you put the transmission into (R.
• If you were using Top down view mode and put the transmission back into (R within 10 seconds after you took it out of (R, Top down view mode will be activated.