SAS SECURITY PRODUCTS Wheel Clamp New Defender Instructions

: June 8, 2024
: SAS SECURITY PRODUCTS

Table of Contents

SAS SECURITY PRODUCTS Wheel Clamp New Defender
Diagram
Maintenance
Spare Parts
To Assemble
About SAS
Documents / Resources

SAS SECURITY PRODUCTS Wheel Clamp New Defender

SAS-SECURITY-PRODUCTS-Wheel-Clamp-New-Defender-PRODUCT

Diagram

Maintenance

On a regular basis for optimum performance:

Clean and lubricate moving parts. We recommend using SAS Corrosion Block Waterproof Grease for moving parts.
We recommend using SAS Mint General Protectant Spray to lubricate and protect the locks of all our products.

Spare Parts

Replacement Parts can be ordered at your local SAS dealer or online at www.sasproducts.com

Your New Defender consists of:

To Assemble

Your New Defender needs assembling prior to use, and once it is set for your wheel size, it needs no further adjustment.

Slide the Rear Extensions into the corresponding sleeves on the Bottom Arms to fit the wheel width as tightly as possible. Secure each using 1 or 2 Allen Cap Head Bolts.
Assemble Top Arm to unthreaded Top Arm Rear Extension. For maximum security, the Allen Cap Head bolts MUST be inserted from the underside of the arm so they sit against the tread of the tyre when the clamp is fitted.
Slide the Bottom Arms into the corresponding 2 Pivoting Arms attached to the Red Front Cover, and secure in place with Allen Cap Head bolts.
Position the Red Housing Cover against the wheel, with the lock facing you, and the 2 pivoting arms towards the ground, in the best position to cover the wheel nuts as centrally on the wheel as possible. Ensure that the hand brake is applied or the vehicle is securely chocked.
Remove the barrel lock by inserting the key making sure that the key goes all the way into the barrel, leaving approximately 10mm of the key shaft exposed. Turn the key 180 degrees in a clockwise direction and pull out the lock.
Position the Red Front Cover against the wheel with the lock, partially inserted, facing you and the 2 pivoting arms on the ground and surrounding the wheel.
Slide the Top Arm over your wheel with the longer arm nearest you. Lifting the red front cover, slide the top arm through the locking slot in the red front cover until you have a tight fit. With the key in position, re-insert the barrel lock and turn the key and lock in a clockwise direction until the lock seats within the lock housing, and the lock and key will not turn any further. Now turn the key 180 degrees in an anti-clockwise direction to lock the barrel, and remove the key.

About SAS

We understand the life of towing and what is important to you. A caravan or a motorhome is more than a box on wheels – it is a home, a store of happy memories and a lifestyle. A trailer is more than just a transport device – it is still the most flexible means available to transport bulky items from A to B by yourself. We know the importance of the experiences you build in your caravan or the days you spend with your trailer behind you.
Unfortunately however, in today’s world, crime and theft continue to increase. Over 4000 caravans are stolen in the UK each year*, and less than 3% are ever fully recovered.
Our vision is to bring a stop to caravan and trailer theft with quality, reliable security solutions that deter criminals and prevent crime. We are on a mission to preserve your assets and memories and give you peace of mind.
Nothing speak of quality, reliability and peace of mind quite like a SAS CLAMP.
In over 30 years of speaking to owners of trailers and caravans, we have developed our solutions to fit your needs, and we are proud of the confidence placed in us by owners, insurers, quality controllers and our distribution network alike.
Visit the SAS website today to find other ways to SECURE YOUR WORLD.**