WHITE LIGHTNING W5A003500 Knock Down Water Based Wall Texture User Guide
- June 8, 2024
- WHITE LIGHTNING
Table of Contents
WHITE LIGHTNING W5A003500 Knock Down Water Based Wall Texture User Guide
Introduction
White Lightning® KNOCK DOWN Wall Texture provides a quick & easy solution to
matching original knock down texture on walls with very minimal mess.
Available in coarse & fine textures for use on interior walls, drywall,
plaster, wood & more.
- Quick & easy spray
- Minimal prep & mess
- Dries in 30 minutes or less
Seamless Touch Up & Repair
Bring product to room temperature prior to application.
-
Make sure the area being repaired & patched is clean & dry.
-
Protect adjacent areas from overspray & other repair products.
-
Complete repairs to walls & wait for proper dry times.
-
Shake can for 2 minutes after ball begins to rattle – repeat can shake for 10 seconds after each minute of use.
-
Practice spraying on scrap material 24” to 36” from surface to determine surface coverage and troweling technique needed to achieve desired knock down pattern. A continuous circular style of spraying is recommended, but can be adapted depending on pattern needed.
-
Wait 1-3 minutes or until texture no longer looks wet; hold knock down trowel knife at 15 angle; lightly move blade down patched area, using just enough pressure to flatten texture – but not remove it.
-
Spray texture onto repaired area – perform trowel knife technique described in step 6.
-
Once dry, add topcoat to match original paint.
Product Description
White Lightning® KNOCK DOWN Wall Texture provides a quick & easy solution to matching original knock down texture on walls with very minimal mess. Available in coarse & fine textures for use on interior walls, drywall, plaster, wood & more.
Physical Properties
- Type: Wall Texture
- Color: Off White
- Shelf Life: 24 months
- Flash Point: -20˚F
- Flammability: Extremely Flammable
- Full Cure Time: 1 hour
- Tack Free Time: 30 minutes or less
- Application Temperature: 68°F to 75°F, <65% humidity
- Vehicle: Dimethyl Ether
- Solids by Weight: 66.60
- Weight: 20 fl. oz.
- Primers: Not Required
Performance Data
Clean Up: Clean paint on tip with warm water; recycle can & cap per local
regulations, wash hands with soap & water
Painting: Paintable after 1 hour. Allow extra dry time during periods of
high humidity and/or cool temperatures, or heavy applications.
Cautions:
EXTREMELY FLAMMABLE. Keep away from heat, sparks, and open flame.
Vapors will accumulate readily and may ignite explosively.
Keep area ventilated during use and until all vapors are gone.
| PART # | UPC | Texture | SIZE |
|---|---|---|---|
| W5A003000 | 0-23275-00375-0 | Coarse | 20.0 fl. oz. |
| W5A003500 | 0-23275-00376-7 | Fine | 20.0 fl. oz. |
PAINTABLE
INTERIOR
CUSTOMER SUPPORT
For more information please call or write:
White Lightning® Products l 101 Prospect Ave. NW l Cleveland, OH 44115
1-800-241-5295 Option 1 Customer
Service l 1-800-241-5295 Option 2
Technical Service
www.wlcaulk.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>