Laney LT112 Guitar Cabinet User Manual
- June 8, 2024
- Laney
Table of Contents
Laney LT112 Guitar Cabinet
IMPORTANT SAFETY INSTRUCTION
- Read Instructions carefully before installing or operating this product.
- Retain these Instructions.
- Comply with Warnings: All warnings and instructions for these products should be adhered to.
- Caution: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to avoid excessive levels that can cause permanent hearing damage.
- Exposure to extremely high noise levels may cause a permanent hearing loss. Individu-als vary considerably in susceptibility to noise induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time.The U.S. Government’s Occupational Safety and Health Administration (OSHA) has speci-fied the permissible noise level exposure in the chart oposite.
According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear plugs or protectors in the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss if exposure exceeds the limits set forth oposite. To ensure against potentially danger-ous exposure to high sound pressure levels it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.
LT112
Features
- Plywood Cabinet. Steel Side Handles. Folding Tilt mechanism for optimum sound projection.
- Supplied with custom embroidered slip cover.
Specifications
- Drivers 1 x 12” Celestion G12H
- Impedance 8 Ohms
- Power 30 Watts
- Inputs 1 x Jack
- Link Out 1 x Jack
- Weight 18 Kg Packed, 16.5 Kg Unit
- Packed Dims (HxWxD mm) 491 x 627 x 388
- Unit Dims (HxWxD mm) 419 x 562 x 323
LT212
Features
- Plywood Cabinet. Steel Side Handles. Folding Tilt mechanism for optimum sound projection.
- Supplied with custom embroidered slip cover.
Specifications
- Drivers 2 x 12” Celestion G12H
- Impedance 8 Ohms
- Power 60 Watts
- Inputs 1 x Jack
- Link Out 1 x Jack
- Weight 25.5 Kg Packed, 24 Kg Unit
- Packed Dims (HxWxD mm) 536 x 745 x 389
- Unit Dims (HxWxD mm) 455 x 679 x 323
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>