MAXIM 12243OFSBR Clover 3 Light Flush Mount User Manual
- June 8, 2024
- MAXIM
Table of Contents
12243OFSBR Clover 3 Light Flush Mount
PRODUCT NAME: CLOVER 3-LIGHT FLUSH MOUNT
ITEM NUMBER: 12243OFSBR Please consult a qualified electrician fixture
and wiring
Light flush mount: 3 x E26 Type A19 60W (Not Included) Made in Vietnam/Hecho en Vietnam/Fabrque en Vietnam
Before Getting Started
Read the instructions carefully prior to assembling
the product.
When you open the package with a sharp tool
like a cutter knife, be careful not to damage the components inside.
Carefully remove all packaging materials and
retain for future use.
Keep all hardware parts and packaging out of
reach of small children.
Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for
complete assembly.
Take care when lifting. Assemble the product in
close proximity to where you intend to position the item.
Do not over tighten the screws and bolts as this
may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder
reduces the appearance of fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
Periodically (every90days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Contents
Before getting, started, ensure the package contains the fallowing components.
A
|
WIRE NUTS
|
X 3
|
---|---|---|---
B
|
MOUNTED PLATE
|
X 1
|
C
|
GREEN GROUND SCREW
|
X 1
|
D
|
8/32 25MM L SCREW
|
X 4
|
E
|
FRAME + SHADE
|
X 1
|
F
|
∅
8/32
16 x 10MM H
CAP NUT
|
X 2
|
---|---|---|---
G
|
WASHER
|
X 2
|
H
|
DIFFUSER
|
X 1
|
I
|
FLATE WASHER
|
X 1
|
J
|
∅
20*10MM H FINIAL
|
X 1
|
MADE IN VIETNAM
Page 3 of ( 6 )
MADE IN VIETNAM
Page 6 of ( 6 )