La Crosse Technology 308-1414B Wireless Atomic Digital Color Forecast Station User Guide

June 8, 2024
LA CROSSE TECHNOLOGY

La Crosse Technology 308-1414B Wireless Atomic Digital Color Forecast

Station

Full-color display shows current temperatures and humidity, as well as a forecast for whether it will be sunny, rainy, or snowy. It has an accurate, self-set atomic time and date, as well as automatic DST updates. It keeps track of minimum and maximum temperatures and notifies you of extreme temperatures. Your heat index and dew point are also displayed. Will indicate a low battery and weak reception. Batteries are required (not included.). Explanation for Weather Station Factory Restart: The factory restart resets the weather station and outdoor sensor to their default settings and frequently resolves problems.

La-Crosse-Technology-308-1414B-Wireless-Atomic-Digital-Color-Forecast-
Station-img-1

La-Crosse-Technology-308-1414B-Wireless-Atomic-Digital-Color-Forecast-
Station-img-2

GET STARTED

  1. Insert the included 5-volt AC power adapter into the weather station and then into wall outlet.
  2. (Optional): Insert 3 new “AAA” batteries (not included) into the weather station. Observe the correct polarity.
  3. Insert 2 new “AA” batteries (not included) into TX141TH-Bv2 sensor. Observe the correct polarity. The red LED will flash when transmitting.
  4. After 5 minutes, place sensor in a shaded outdoor location.

SET TIME, DATE, AND TEMPERATURE UNITS

NOTE
Only press or hold one button at a time.

  1. Hold the TIME SET button 3 seconds to enter time set mode.
  2. Press and release the ▼ or ▲ buttons to adjust values.
  3. Press and release the TIME SET button to confirm adjustments and move to the next item.

SETTINGS ORDER

  1. WWVB ON/OFF
  2. Time Zone
  3. Daylight Saving Time
  4. 12/24 Hour Time Format
  5. Hour
  6. Minutes
  7. Year,
  8. Month
  9. Date
  10. Fahrenheit/Celsius

Press and release the TIME SET button to exit, or wait 20 seconds without pressing buttons to return to the time display.

SET TEMPERATURE ALERTS

  1. Hold the ALERTS button for 3 seconds.
  2. The temperature alert value will blink in set mode.
  3. Press and release the ▼ or ▲ buttons to adjust alert values.
  4. Press and release the ALERTS button to confirm & move to the next alert.

THE TEMPERATURE ALERT ORDER:

  1. Outdoor High
  2. Outdoor Low
  3. Indoor High
  4. Indoor Low

Press and release the ALERTS button to exit, or wait 20 seconds without pressing buttons to return to normal time display

ARM / DISARM TEMPERATURE ALERTS

Press and release the ALERTS button to toggle between the alerts Outdoor HI / Outdoor LOW / Indoor HI / Indoor LOW

  • Arm the alert with the ▲button.
  • Disarm the alert with the ▼ button.
  • ALERT BELL ICON appears when armed.

La-Crosse-Technology-308-1414B-Wireless-Atomic-Digital-Color-Forecast-
Station-img-3

ACTIVE TEMPERATURE ALERT

  • Beeps once per minute with flashing alert bell icon.
  • Press any button to stop the alert.

SET TIME ALARM

  1. Hold the ALARM button to enter alarm time set mode.
  2. Press the ▼ or ▲ buttons to adjust alarm time.
  3. Press the ALARM button to confirm adjustments and move to the next item.

ALARM TIME SETTING ORDER:

  1. Hours
  2. Minutes

ACTIVATE / DEACTIVATE TIME ALARM

  • Press and release the ALARM button once to view alarm time.
  • Press and release the ALARM button again to activate the alarm. Once activated the bell icon appears.
  • Press and release the ALARM button again to deactivate the alarm. The bell icon will disappear.

SNOOZE (SILENCES ALARM TEMPORARILY)

  • When alarm sounds, press and release the LIGHT/SNOOZE button to silence the alarm for 10 minutes.
  • The alarm icon Zz will flash.
  • In snooze mode, press any button to stop the alarm for one day. Note: The alarm is crescendo sound. The alarm will sound for 2 minutes and then shut off completely.

FORECAST ICONS

The weather station uses changing atmospheric pressure to predict weather conditions for the next 12-hours with 70-75% accuracy.  Note: Please allow 7 days for barometer calibration.

La-Crosse-Technology-308-1414B-Wireless-Atomic-Digital-Color-Forecast-
Station-img-4

Note: The “snowy” icon appears when the temperature is below 32°F (0°C) and the forecast is rainy or stormy.

FORECAST TREND INDICATOR

La-Crosse-Technology-308-1414B-Wireless-Atomic-Digital-Color-Forecast-
Station-img-5

HEAT INDEX/DEW POINT

  • Press the HEAT/DEW button once to view Heat Index.
  • Press the HEAT/DEW button twice to view Dew Point.

ADJUST BACKLIGHT

WHEN USING A/C POWER:

Press and release the HI/LOW/OFF button to adjust the backlight.

WHEN USING BATTERY POWER ONLY:

Press and release the HI/LOW/OFF button for 10 second backlight.

VIEW/RESET MIN/MAX VALUES

The station automatically resets minimum and maximum values daily at midnight (12:00 AM).

  • Press and release the ▼ button to view minimum values.
  • Hold the ▼ button for 5 seconds to reset minimum values.
  • Press and release the ▲ button to view maximum values.
  • Hold the ▲ button for 5 seconds to reset maximum values.

SEARCH FOR OUTDOOR SENSOR

  • Hold the HEAT/DEW button for 3 seconds to search for the outdoor sensor.
  • The strength signal icon will animate until the sensor signal is received or for 3 minutes if no signal available.

La-Crosse-Technology-308-1414B-Wireless-Atomic-Digital-Color-Forecast-
Station-img-6

TEMPERATURE/HUMIDITY TREND INDICATORS

The temperature (2°F/1°C) and humidity (3% RH) trend indicators update every 30 minutes or less.

  • Temperature has risen in the past 3 hours.

  • Humidity has risen in the past 3 hours.

  • Temperature has not changed in the past 3 hours.

  • Humidity has not changed in the past 3 hours.

  • Temperature has fallen in the past 3 hours.

  • Humidity has fallen in the past 3 hours.

MANUAL WWVB RADIO-CONTROLLED TIME SEARCH

  • Press and release the TIME SET button to start or stop a manual signal search.
  • The WWVB Icon will flash

For information about WWVB, visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

SPECIFICATIONS

Indoor :
Temperature Range:| 32°F to 122°F (0°C to 50°C)
Humidity Range:| 10%-99% (RH)
Outdoor :
Temperature Range:| -40°F to 140°F (-40°C to 60°C)
Alkaline Batteries:| -20°F to 140°F (-28.8°C to 60°C)
Lithium Batteries:| -40°F to 140°F (-40°C to 60°C)
NOTE:| Temperatures below – 20°F (-28.8°C) require Lithium batteries in the outdoor sensor.
Humidity Range:| 10%-99% (RH)
Distance:| Over 300 ft. (91 meters) RF 433MHz (open air)
Power:
Weather Station|
Primary Power: AC/6 Number:| 5-volt AC power adapter (included) GPU280500150WA00
Optional/Battery Backup| Optional 3-AAA, IEC, LR3 batteries (not included)
TX141TH-BV2 Sensor:| 2-AA, IEC, LR6 batteries (not included)
Battery Life:
Weather Station Battery Backup:| Battery life is over 36 months when using the AC adapter for primary power


TX141TH-BV2 Sensor:

| Battery life is over 12 months when using reputable battery brands for both Alkaline and Lithium batteries
Dimensions:
Weather Station:| 8.34” L x 1.03” W x 5.48” H

(211.836 x 26.162 x 139.192mm)


TX141TH-BV2 Sensor:

| 1.57″ x 0.79″ x 5.12″

(40 x 20 x 130mm)

LOW BATTERY ICON

Low battery icon indicates low battery for the station or sensor.

  • Battery next to Outdoor Temperature, replace sensor batteries
  • Battery near Indoor Temperature, replace weather station batteries.

POSITION OUTDOOR SENSOR

  • Mount the outdoor sensor on a north-facing wall or in any well-shaded area. Under an eave or deck rail is preferred.
  • The maximum transmitting range to the weather station is over 300 feet (91 meters) in open air, not including walls.

WEATHER STATION CARE AND MAINTENANCE

  • Do not mix old and new batteries
  • Do not mix Alkaline, Standard, Lithium, or Rechargeable Batteries
  • Always purchase the correct size and grade of battery most suitable for the intended use.
  • Replace all batteries of a set at the same time.
  • Clean the battery contacts and also those of the device prior to battery installation.
  • Ensure the batteries are installed correctly with regard to polarity (+ and -).
  • Remove batteries from equipment when it not to be used for an extended period of time.
  • Promptly remove expired batteries.
  • If the product is not working properly, change the batteries and/or check the A/C cord connection.

Frequently Asked Questions

My time and date are not correct.

Make sure the sensor is in a shaded area and has a clear view of the sky. If it is still not correct, remove the batteries and wait 5 minutes before reinstalling them.

My sensor lost power or was unplugged during a power outage. How do I reset it?

Remove the batteries from the sensor for 5 minutes, then replace them and wait 5 minutes before plugging in the power adapter.

Can it be wall mounted?

wall mounting.

Does this have variable brightness settings?

When plugged in it has 3 brightness setting. High, medium, and dimmed. When on battery, it is automatically dimmed, then you click for brightness, then goes back to dim.

What’s the difference between this unit and the S88907

The S88907 has a humidity range of 1% to 99% RH. It also includes an Indoor comfort range: Too DRY (1-25%), DRY (26-39%), Comfort OK (40-75%), Wet (76-83%), Too Wet (84-99%), and a 300-foot wireless transmission range. The 308-1414B has a humidity range: 19% to 97% RH, and a 200-foot wireless transmission range.

Does it come with batteries?

No it doesn’t come with batteries you’ll need 2 double A’s for the outdoor sensor (which pretty much have to be lithium ion batteries or the outdoor sensor will constantly loose sync with the indoor screen and not display a temp or humidity) and three triple A’s for the display screen.

What are the dimensions of this item?

As it sets on my table it is 8″ wide, 5″hi. Unit is about 1/2″ deep, but use of the easel stand will take up more room.

What wireless protocol and/or frequency does this use? Thanks!

If you have a hand-held radio turned on in the UHF freq. range 420-450 MHz the transmission of the remote sensor is irritating. Took me awhile to discover where the interference was coming from.

How come you stopped making the model that will display weather forecast for up to three days?

Don’t know – but it’s as accurate as the local weatherman – pointless.

does the display stay on all the time, or do you have to hit a button? I want it to stay on all the time.

Oh yes, the display is on all the time and is quite visible across the largest room of a typical home. Beautiful and in color.

Does the remote require 2 aa or 2 aaa?

The remote requires 2 AA, the station needs 3 AAA.

Does this unit 308 1414B come with an adapter allowing it to be plugged in, specs state only that batteries are required and nothing about an adapter.

The sensor operates on 2 AA batteries. The Receiver operates on 3 AAA batteries or the included 5V AC adapter to plug into an outlet.

Video

La-Crosse-Technology-308-1414B-Wireless-Atomic-Digital-Color-Forecast- Station

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

LA CROSSE TECHNOLOGY User Manuals

Related Manuals