RAZER THX Hammerhead True Wireless Pro Bluetooth Gaming User Guide

RAZER THX Hammerhead True Wireless Pro Bluetooth Gaming

Enjoy true audio freedom and a pure, uninterrupted listening experience with the most advanced earbuds we’ve ever created. Sporting a 60ms low latency connection and hybrid active noise cancellation, focusing on your games, music and videos has never been this absolute.

WHAT’S INSIDE/ WHAT’S NEEDED

WHAT’S INSIDE

Razer Hammerhead True Wireless Pro earbuds

Charging case

Charging cable

Additional silicone ear-tips in 3 sizes (5, M, L}

Comply™ foam tips (M)

WHAT’S NEEDED

• Devices with Bluetooth audio capability
• Internet connection for app installation

LETS GET YOU COVERED

You’ve got a great device in your hands, complete with a 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com

Got a question? Ask the Razer Support Team at support.razer.com

TECHNICAL SPECIFICATIONS

• Frequency Response : 20 Hz – 20 kHz
• Impedance: 16 Ohm
• Sensitivity: 118dB
• Input power: 3 mW
• Driver size – Diameters: 10mm
• Connection type : Bluetooth connection
• Microphone Frequency Response : 100 Hz -10 kHz
• Microphone Pick Up Pattern: Omni -directional
• Microphone Signal-to-Noise Ratio : 64dB
• Microphone Sensitivity: -26dBFS
• Compatibility: Devices with Bluetooth audio capability
• Smartphone app : Available for Android and iOS
• Supported codecs : SBC, AAC

GETTING STARTED

CHARGING YOUR RAZER HAMMERHEAD TRUE WIRELESS PRO

For first time use, connect the charging case to a USB port using the charging cable without removing the earbuds. For subsequent use, the charging case and the earbuds can be charged independently.

Wait until your Razer Hammerhead True Wireless Pro is fully charged.

BATTERY INDICATOR FOR THE CHARGING CASE

When Plugged In

When Unplugged

PAIRING TO A MOBILE DEVICE

When trying to connect your Razer product, remember to keep it within 1 meter of your mobile device.

1. While inside the charging case, simply open the lid to enter pairing mode
2. Enable Bluetooth on your mobile device and select Razer Hammerhead TWS Pro from thelist of devices found.
3. Wait for pairing to complete. You will hear an audio prompt when the earbuds have successfully paired and connected to your device

If the earbuds fail to connect to your audio source, the earbuds will stay in search mode then power off after 3 minutes. If this happens, simply repeat the steps again to pair.

• Once the earbuds have been paired, it will automatically try to connect to that paired mobile device every time the charging case’s lid is opened, or the earbuds are powered on.
• Your earbuds can only connect to one mobile device at a time.

USING YOUR EARBUDS

GAMING MODE

While connected, triple tap then hold the last tap for at least 2 seconds on any earbud to activate gaming mode. Once enabled, your earbuds will function at a lower latency; giving you real-time audio feedback while gaming. Repeat the same gesture to disable gaming mode.

For best performance, it is recommended to keep vour earbuds within a verv close distance of the audio source.

ACTIVE NOISE CANCELLATION (ANC) / QUICK ATTENTION MODE

Active Noise Cancellation helps eliminate background noise while Quick Attention Mode allows you to hear your surroundings without needing to remove the earbuds. While connected, tap and hold on any earbud for at least 2 seconds to activate ANC and repeat to activate Quick Attention Mode. Doing the same gesture for the third time will deactivate both functions.

An audio prompt will notifv vou when ANC and/or Quick Attention Mode have been enabled or disabled.

USING THE SILICON EAR-TIPS

The silicon ear-tips offer increased comfort, sound isolation, and security. Various size options let you achieve a comfortable and secure fit that effectively reduces unwanted noise.

Due to the different ear canal sizes of individuals, it’s recommended to interchange the ear-tips to a larger or smaller size to improve comfort and sound quality and achie11e a proper seal.

POWER ON/OFF

To power off the device, simply place the earbuds back inside the charging case and close the lid. Opening the lid if they are in the charging case will power them on.

If the earbuds are left idle outside the charging case for a few minutes, you will hear an audio prompt and then the earbuds will power off.

Tap and hold the function button on each earbud for at least 2 seconds to power them on again. You will hear an audio prompt from each earbud once they are powered on.

FUNCTION BUTTON QUICK REFERENCE

The following functions are only available when the earbuds are paired to a mobile device.

RAZER AUDIO APP

Making advanced customization just got a whole lot easier for your Razer Hammerhead True Wireless Pro earbuds. With the Razer Audio app, learn all its gestures, select from predefined EQs or customize one as needed, remap what each tap or gesture function does and much more­anytime, anywhere.

SAFETY AND MAINTENANCE

SAFETY GUIDELINES

• In order to achieve maximum safety while using your Razer Hammerhead True Wireless Pro, we suggest that you adopt the following guidelines:
• Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for assistance.
• Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
• Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0° C (32 ° F) to 40 ° C (104 ° F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.
• The device isolates external ambient sounds even at low volumes, resulting in lowered awareness of your external surroundings. Please remove the device when engaging in any activities that requires active awareness of your surroundings.
• Listening to excessively loud volumes over extended periods of time can damage your hearing. Furthermore, legislation of certain countries permits a maximum sound level of 86db to affect your hearing for 8 hours a day. We therefore recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.

MAINTENANCE AND USE

The Razer Hammerhead True Wireless Pro requires minimum maintenance to keep it in optimum condition. Once a month we recommend you clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.

LEGALESE

COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION

©2020 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, and “For Gamers. By Gamers.” are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks are the property of their respective owners.
©2018 Google LLC All rights reserved. Android, Google, Google Logo, Google Play, and the Google Play logo are registered trademarks of Google LLC.
Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Razer is under license.
THX and the THX Logo are the property of THX Ltd., registered in the U.S. and other countries.
Comply is a registered trademark of Hearing Components, Inc.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered) concerning the product in this guide. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. The Razer Hammerhead True Wireless Pro (the
“Product”) may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.

LIMITED PRODUCT WARRANTY

For the latest and current terms of the Limited Product Warranty, please visit razer.com/warranty.

LIMITATION OF LIABILITY

Razer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of, sale of, resale of, use of, or inability to use the Product. In no event shall Razer’s liability exceed the retail purchase price of the Product.

GENERAL

These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable} shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.

FOR GAMERS. BY GAMERS.’

References

• Razer Warranty Policy | Razer United States
• support.razer.com/
• Razer ID
• support.razer.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>