JBL TUNE 570BT Wireless Headphone User Guide
- June 8, 2024
- JBL
Table of Contents
TUNE570BT
QUICK START GUIDE
WHAT’S IN THE BOX
POWER ON & CONNECT
- POWER ON AND AUTOMATICALLY ENTER PAIRING MODE
- CHOOSE “JBL TUNE570BT” TO CONNECT
MANUAL PAIRING
- POWER OFF
- MANUAL PAIRING MODE
- CHOOSE “JBL TUNE570BT” TO CONNECT
BUTTON COMMAND
MULTI-POINT CONNECTION
- (MAXIMUM 2 DEVICES) ENTER PAIRING MODE WITH THE 2ND DEVICE
1 TO SWITCH MUSIC SOURCE, PAUSE THE MUSIC ON THE CURRENT DEVICE AND
SELECT PLAY ON THE 2ND DEVICE.
2 PHONE CALL WILL ALWAYS TAKE PRIORITY.
3 IF ONE DEVICE GOES OUT OF BLUETOOTH RANGE OR POWERS OFF, YOU MAY NEED
TO MANUALLY RECONNECT THE REMAINING DEVICE.
4 SELECT “FORGET THIS DEVICE” ON YOUR BLUETOOTH DEVICES TO DISCONNECT
MULTI-POINT.
CHOOSE “JBL TUNE57OBT” TO CONNECT
- 1ST BLUETOOTH DEVICE
- 2ND BLUETOOTH DEVICE
CHARGING
LED BEHAVIORS
TECH SPEC
| Model: | TUNE 570BT |
|---|---|
| Driver Size: | 32 mm / 1.26” Dynamic Driver |
| Power supply: | 5V 1A |
| Weight: | 160 g/0.35 lbs |
| Headset battery type: | Lithium-ion battery (3.7 V / 450 mAh) |
| Charging time: | 2 hrs |
| Music playtime with BT on: | up to 40 hrs |
| Frequency response: | 20 Hz — 20 kHz |
| Impedance: | 32 ohm |
| Sensitivity: | 103.5 dB SPL@1 kHz/1 mW |
| Maximum SPL: | 95 dB |
| Microphone sensitivity: | -29 dBV@1 kHz/Pa |
| Bluetooth version: | 5.0 |
| Bluetooth profile version: | A2DP V1.3, AVRCP V1.6, HFP V1.7 |
| Bluetooth transmitter frequency range: | 2.4 GHz — 2.4835 GHz |
| Bluetooth transmitted power: | <8 dBm |
| Bluetooth transmitted modulation: | GFSK, π/4DQPSK,8DPSK |
| Maximum operation temperature: | 45 °C |
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
HP_JBL_TUNE57OBT_QSG_EMEA & RUSSIA_CR_V3