ALTEC LANSING IMW1400 HydraBoom Everythingproof Wireless Speaker User Guide

ALTEC LANSING IMW1400 HydraBoom Everythingproof Wireless Speaker

AIMPORTANT
PLEASE DO NOT RETURN TO STORE If You’re Having Trouble, We’re Here to Help!

Call us 24/7 at 1-855-292-4087
E-mail us at [email protected] or visit us at alteclansing.com

REGISTER YOUR PRODUCT
To receive news, exelusive deals, OTA or firmware updates, warranty information and more please register your product at
alteclansingsupport.com

WELCOME
Thank you for purchasing an Altec Lansing product. Jet’s our go alto make sure you- are happy Share your happiness with our customer concierge

• follow us @alteclansingofficial
• follow us @alteclansing
• follow uus  @alteclansingofficial

12 Month Limited Warranty

All Altec Lansing products come with 12 month limited warranty from the date of its original purchase

24 Hour Customer Support
We love our customers, and we care about your experience with Altec Lansing.
If you need assistance, please call us at 1.855.292.4087 or e-mail [email protected]

In the Box

A Closer Look

Charging

Powering On/ Bluetooth Pairing

Speaker Controls/Voice Assistant/Reset

PRESS / PRESS & HOLD (2 sec)

• + Volume Up
• -Volume Down
• Play/Pause
• Answer & End Call
• ON /OFF
• + Next Track
• – Previous Track
• Reject Incoming Call
• To activate Voice Assistant (Siri or Google Assistant)

Reset- Press & Hold
Disconnect Bluetooth: Press and hold for five seconds and the speaker will beep
Reset All connections: Press and hold for ten seconds and the speaker will power off

True Wireless Pairing

Turn on the first speaker and connect It with a Bluetooth compatible device.

Turn on the first speaker and connect It with a Bluetooth compatible device. button on that speaker.

Press and hold the button for 2-3 seconds on the first speaker.
The first speaker will now connect to the second so they both play in sync.
The Link Buttons will illuminate green.
To end TWS press & hold the power button on the speaker.

There are two modes:

• Mode 1: Dual Stereo, both play stereo for parties etc.
• Mode 2: Wide Stereo, one plays left and the other right. Briefly press the button to switch between the modes.

Horizontal & Vertical Listening

The speaker will automatically switch modes based on it’s position (horizontal or vertical).

Light Change Mode

To toggle between the different light modes:

1. Multicolor slow transition
2. Single color pulse to music
3. Multi color pulse to music
4. Single color slow fade
5. Single color
6. Multicolor cycle changed
7. Multicolor fast changed with background color
8. Multicolor slow fade
9. Four color slow fade
10. Four color rotation with pulse to music
11. Four color rotation
12. Off

Press & Hold the button for 1-2 sec to  change the Strobe light modes.

• off  Pulse to music Blink Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817, USA 855-292-4087
www.alteclansing.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>