vytronix R4SFL Steam Mop Instruction Manual
- June 8, 2024
- VYTRONIX
Table of Contents
- Important Safety Instructions
- Operating Instructions
- Care & Maintenance
- Microfiber pads
- Product Assembly &Parts
- Before Using Your steam mop
- Technical information
- Using the Carpet Glide
- Troubleshooting
- Warranty Registration
- Safe Disposal
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
R4SFL STEAM MOP
INSTRUCTION MANUAL
www.vytronix.com
Important Safety Instructions
IMPORTANT
Be sure to read ALL instructions and warnings before using your appliance.
WARNING
Risk of electrical shock: Be sure to read and follow all instructtions and
warnings.
CAUTION
The appliance emits very hot steam to sanitize the area of use. This means
that the steam head, Microfiber Pad and Carpet Glide get very hot during use.
Care should be taken when using this appliance.
DO NOT touch them during use except in the approved manner as outlined in this
manual.
SAVE THESE INSTRUCTIONS:
For household use only. Any other use of this appliance will void the
manufacturer’s warranty.
Basic precautions should be observed when using an electrical appliance,
including the following:
- Do not direct steam at people, animals, electrical appliances or electrical outlets
- Do not expose to rain
- Store indoors.
- Unplug from outlet when not in use and before conducting service maintenance or trouble-shooting.
- Do not leave the appliance unattended.
- Do not leave the appliance connected to an electrical outlet when not in use.
- Do not service the appliance when it is plugged in.
- Do not use with damaged cord or plug.
- Do not use your appliance if it has been dropped, damaged, left outdoors or dropped into water.
- Do not handle the appliance with wet hands.
- Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or expose cord to heated surfaces.
- Do not unplug by pulling on cord.
- Do not use on or near flammable or toxic substances including, oil-based paint thinner, gases, flammable dust or other explosive or toxic vapours.
- Do not allow to be used as a toy.
- Do not use on leather, wax polished furniture or floors, synthetic fabrics, velvet or other delicate, steamsensitive materials.
- Do not immerse in water or any other liquid.
- Do not use for any purpose other than described in this user manual.
- Never put detergent or chemical products into the appliance unless they have been approved by Vytronix Ltd, as this may damage it or make it unsafe for use.
- Unplug by grasping the plug, not the cord. 20. Avoid using the appliance near children or babies as this appliance gets very hot.
- Contact vytronix customer support if you experience any issues not detailed in the troubleshooting guide.
- Do not allow the unit to be repaired or disassembled by anyone without proper training to do so, doing so could cause a fire or electrical shock or void warranty.
- Do not puncture steam hose that is exposed by the swivel steam head joint.
Operating Instructions
IMPORTANT
Always ensure that your appliance is UNPLUGGED from the wall receptacle prior
to cleaning or emptying the water tank.
CAUTION
Do not immerse your appliance in water or any other liquid.
CAUTION
Always operate appliance by gripping the handle. Do not grip by the pole.
Care & Maintenance
- Turn your appliance off and unplug from the electrical outlet.
- Wrap power cord around cord hangers.
- Leave the appliance for five minutes to cool down after use before removing the microfibre pad and emptying the water tank.
- Never leave microfiber pad on the appliance when you have finished using it. Always remove the microfiber pad and wash in warm water with a mild detergent. Never use bleach or fabric softener when cleaning the microfiber pad.
- The microfibre pad can be washed in the washing machine, we recommend leaving it to hang dry or drying it on a radiator for 24hours to ensure it is fully dry and improve the lifespan.
- To improve the lifespan of your appliance we recommend cleaning the water tank and descaling it once a month or every four or five uses, you can use a normal descaling kit with water and run it through the steamer until all the water has been used.
- Always empty the water tank when you have finished using your appliance.
- Wipe your appliance with a damp cloth to clean. Never immerse the appliance in water or any other liquid.
Helpful Hints:
- Always use a vacuum or sweep before sanitizing your floors.
- The easiest way to use the machine is to tilt the handle to a 45º angle and clean slowly 23 yards at a time.
- A good amount of steam passes through the microfiber pad. We recommend that the microfiber pad be changed when it becomes oversaturated.
- To remove stubborn stains from vinyl or linoleum floors, pre-treat with a mild detergent and some water before using the steam mop.
Microfiber pads
How to Use Microfiber Pads
- Please make sure that a completely dry pad is used.
- As high temperature steam passes through a pad to contact the floor to kill germs, molds, mites and to provide a certain amount of water necessary for cleaning, it is natural that the pad gradually absorbs moisture. After a certain length of time, the pad repels water and becomes damp.
- To keep the floor clean and dry, replace the pad when it is dirty.
- Only remove the pad from unit when not in use and steam is not being emitted.
How to Clean and Store
- Hand wash or machine wash the microfiber pad in cold water on the delicate cycle with a mild detergent. (Do not use a fabric softener)
- Using a washing machine may shorten the lifespan of the pads.
- We recommend air drying the microfiber pad for 24 hours.
Product Assembly &Parts
Base Assembly:
Insert screw as shown. Tighten using a flat-head screwdriver. If screw turns
freely without “gripping” the insert threads, apply additional pressure when
turning.
Floor Setting Indicator Light:
Ideal for ceramic, stone, tile and other durable floors.
Perfect for sealed hardwood, laminate, bamboo and other delicate floors
1. Water Tank Release Button | 8. Floor Setting Control |
---|---|
2. Detachable Water Tank | 9. Floor Setting Indicator Light |
3. Power Cord Organizer (bottom | 10. Steam Power Switch |
4. Assembly Screw (x1) | 11. Storage Hook (rotates 360º) |
5. Carpet Glide | 12. Main Body Assembly Screw |
6. Microfiber Pads (x1) | 13. Power Cord |
7. Handle |
Before Using Your steam mop
Be sure to read ALL instructions and warnings before using your steam mop.
WARNING
Your steam mop is designed to clean hard floor surfaces that will withstand
high heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces
that have been treated with wax or some no-wax floors, the sheen may be
removed by the heat and steam action. It is always recommended to test an
isolated area of the surface to be cleaned before proceeding. We also
recommend that you check the use and care instructions from the floor
manufacturer.
Helpful Hint:
- When heated, never leave the appliance in one spot on any surface for any period of time.
- Always empty water from water tank after use.
IMPORTANT:
This product is NOT for space heating purposes.
CAUTION
The appliance emits very hot steam to sanitize the area of use. This means
that the steam head, Microfiber Pad and Carpet Glide get very hot during use.
Care should be
taken when using this appliance. DO NOT touch them during use except in the
approved manner as outlined in this manual.
Technical information
Rated voltage: 220-240V
Rated frequency: 50Hz
Output power: 1600W (+5%,-10%)
Water tank capacity: 400 ML
With a ready indicator. When the appliance is connected to power supply, turn
on the power switch, after 25s the mop start to emit the steam
The angle of the rotation axis in the cleaner is greater;
Using Your Steam Mop-Operating Instructions
Insert screw into the hole; tighten using a flat-head screwdriver.| Press
Water Tank Release but- ton and remove water tank.| Press Water Tank Release
but- ton and remove water tank.
Tighten cap, insert tank (cap down) until it “clicks”.| Press ON/OFF button.
Wait 25 seconds for unit to heat up unit may vibrate while heating.| Gently
place unit on microfiber pad. You are now ready to steam clean.
Tilt handle at a 45º angle. Push and pull slowly across the floor to clean
thoroughly.| When done, push ON/OFF button| When unit has cooled, remove
microfiber pad. Store unit upright in a dry area.
IMPORTANT:
Always empty the water tank once you have finished using your appliance.
IMPORTANT: Vibration Sound
While the unit is turned off, air builds up in the water pump line. This is a
common accurance.
When the unit is turned on the water pump pushes air out of the line and emits
a vibrating sound. This occurs while the unit is heating up and also when the
water tank is emptied during use. If the vibration sound persists for more
than 60 seconds during heat up, check to make sure the water tank is assembled
correctly.
Floor Setting Button:
Use this button to switch between two steam levels, each catering to specific
floor types.
Floor Setting Indicator Light:
This light indicates which steam floor setting level is selected.
High steam emission ideal for ceramic, stone, tile and other durable floors.
Gentle steam emission perfect for sealed hardwood, laminate, bamboo and other
delicate floors.
Using the Carpet Glide
What is the Carpet glide?
The carpet glide enables the steam mop to be used on softer surfaces including
carpets, rugs, upholstery and pet bedding. The steam mop is designed to kill
dust mites and other allergens. Please check the labels on upholstery
particularly rugs before using this appliance on them.
Attach carpet glide by placing unit under “tabs” and gently pushing down into place.| Turn unit on, slowly move unit back and forth over stain.| Turn unit off, let cool. Use foot on “Hands free” tab to remove Tray from steam head
Troubleshooting
Here are some handy tips to follow if you experience any issues with this
appliance.
CAUTION! ENSURE THE UNIT IS DISCONNECTED FROM THE MAINS AND HAS COMPLETELY
COOLED DOWN BEFORE PERFORMING ANY TROUBLESHOOTING CHECKS OR MAINTENANCE.
Problem | Solution |
---|---|
Vibration sound last longer than 60 seconds. | • Add water to the water tank. . |
Ensure that water tank is inserted correctly in unit.
Unit not operating.| • Ensure plug is set firmly in outlet.
• Check and replace the fuse.
Unit does not emit steam.| • Ensure water tank is filled with water.
Water left on floor.| • Change the microfiber pad.
• Ensure unit is always level and parallel to the floor.
White spot left on floor.| • When cleaning do not leave unit in one spot for
too long.
• Use protector pad / floor mat when unit is ON and stationary.
• Use distilled water instead of hard tap water.
• NOTE: To remove any spots, use a damp cloth and a small amount of white
vinegar.
Warranty Registration
To register you free one year Vytronix warranty visit
www.vytronix.com using product
code: brandnew-vytronix-R4SFL
If you have any queries or require assistance with using your product
including set up, troubleshooting or registration please email our customer
care on support@vytronix.com
Safe Disposal
This marking indicates that this product should not be disposed with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To arrange safe disposal of your used device, please use the return and collection systems or contact the retailer where the product was purchased.
If you have any queries or require assistance with using your
product including set up, troubleshooting or registration please
email our customer care
onsupport@vytronix.com
Register your warranty atwww.vytronix.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>