MANSFIELD 5075550000 Swirl-Way Luxury Series Instruction Manual
- June 8, 2024
- MANSFIELD
Table of Contents
MANSFIELD 5075550000 Swirl-Way Luxury Series
FEATURES
- High gloss, easy-to-clean acrylic with fiberglass reinforcement
- Whirlpool hydromassage system uses fully controllable, high-pressure back and body jets for complete muscle relief
- Hydro-V back jet system with back and body jets
- Clean, geometric lines
- All jets are directionally and flow adjustable
- Includes one pillow
- Rectangular model with end drain (left- or right-hand installation)
- Pre-leveled legs for easy installation
- Integrated dual armrests for bather’s comfort
- Two decorative handles
- Spacious bathing well designed for one-person comfort
- 10-year limited warranty on acrylic
- Installation: Drop-In, Alcove or Undermount
- Available in White
MODEL 5075550000
COMPONENTS
| MODEL # | DESCRIPTION | CODES/STANDARDS |
|---|
5075550000
|
72″ x 42″ x 22-1/2″ Rectangular Swirl-Way® Whirlpool. Drain not included.
|
ACCESSORIES
CAB-| Cable Overflow Drain (White — 1330, Chrome — 1335, Everbrass — 1336,
Brushed Nickel — 1337, Oil Rubbed Bronze — 1338, Matte Black — 1339)
TIP-| Tip Toe Overflow Drain (Chrome — 1335, Everbrass — 1336, Brushed Nickel
— 1337, Oil Rubbed Bronze — 1338, Matte Black
— 1339)
SWAPOO| Nailing Flange Kit (includes 14′ PVC nailing flange, tacky tape and installation instructions)
SPECIFICATIONS
| SOAKING DEPTH | 15-3/4″ | ||
|---|---|---|---|
| MATERIAL | Acrylic, fiberglass reinforced | ||
| NUMBER OF JETS | 14 | ||
| Self contained, pre-plumbed whirlpool bath system mounted on pre-leveled | |||
| base. | WATER CAPACITY | 88 gal. (min.) / 99 gal. (max) | |
| CONSTRUCTION | FLOOR LOADING WEIGHT | 47 lbs. sq.ft. | |
| One 120 volt, 20 amp GFCI dedicated circuit. Optional heater: separate 120 | |||
| volt, 20 amp dedicated circuit. | SHIPPING WEIGHT | Model 5075550000 – 175 lbs. |
(79 kg)
ELECTRICAL REQUIREMENTS| WHIRLPOOL PUMP| 9 amp
| WARRANTY| Acrylic – 10-Year
TECHNICAL INFORMATION
Note : these dimensions are nominal and subject to change without notice
NOTES:
- The pump location is shown for clarity.
- The required pump motor access is 2011 W x 1511 H.
- Measurements may vary 1/4″ (+/-)
- If a factory-installed nailing flange is added to a unit, add l/811 to each side flanged.
- The removable apron is not available for this unit.
- These dimensions are nominal and subject to change without notice.
Mansfield Plumbing Products, LLC
Customer Service
- Toll Free 877-850-3060
- Fax 419-938-6234 www.mansfieldplumbing.com
- Email: [email protected]
- ©2021 Mansfield Plumbing Products, LLC
References
Read User Manual Online (PDF format)
Loading......