MANSFIELD 5073550000 Swirl-Way Luxury Series 36 Inch W x 66 Inch L White Acrylic Instruction Manual
- June 8, 2024
- MANSFIELD
Table of Contents
MANSFIELD 5073550000 Swirl-Way Luxury Series 36 Inch W x 66 Inch L White
Acrylic
FEATURES
- High gloss, easy-to-clean acrylic with fiberglass reinforcement
- Whirlpool hydromassage system uses fully controllable, high-pressure back and body jets for complete muscle relief
- Hydro-V back jet system with back and body jets
- Clean, geometric lines
- All jets are directionally and flow adjustable
- Includes one pillow
- Rectangular model with end drain (left- or right-hand installation)
- Pre-leveled legs for easy installation
- Integrated dual armrests for bather’s comfort
- Two decorative handles
- Spacious bathing well designed for one-person comfort
- 10-year limited warranty on acrylic
- Installation: Drop-In, Alcove or Undermount
- Available in White
COMPONENTS
MODEL # | DESCRIPTION | CODES/STANDARDS |
---|
5073550000
|
66″ x 36″ x 22-1/2″ Rectangular Swirl-Way® Whirlpool. Drain not included.
|
ACCESSORIES
CAB-| Cable Overflow Drain (White — 1330, Chrome — 1335, Everbrass — 1336,
Brushed Nickel — 1337, Oil Rubbed Bronze — 1338, Matte Black — 1339)
TIP-| Tip Toe Overflow Drain (Chrome — 1335, Everbrass — 1336, Brushed Nickel
— 1337, Oil Rubbed Bronze — 1338, Matte Black
— 1339)
SWAPOO| Nailing Flange Kit (includes 14′ PVC nailing flange, tacky tape and installation instructions)
SPECIFICATIONS
MATERIAL
|
Acrylic, fiberglass reinforced
| | SOAKING DEPTH| 15-3/4″
---|---|---|---|---
NUMBER OF JETS| 14
CONSTRUCTION
| Self contained, pre-plumbed whirlpool bath system mounted on pre-leveled
base.| WATER CAPACITY| 60 gal. (min.) / 75 gal. (max)
FLOOR LOADING WEIGHT| 47 lbs. sq.ft.
ELECTRICAL REQUIREMENTS
| One 120 volt, 20 amp GFCI dedicated circuit. Optional heater: separate 120
volt, 20 amp dedicated circuit.| SHIPPING WEIGHT| Model 5073550000 – 165 lbs.
(75 kg)
WHIRLPOOL PUMP| 9 amp
WARRANTY| Acrylic – 10-Year
TECHNICAL INFORMATION
Note: these dimensions are nominal and subject to change without notice.
NOTES:
- Pump location is shown for clarity.
- Required pump motor access is 2011 W x 1511 H.
- Measurements may vary 1/4″ (+/-)
- If a factory installed nailing flange is added to a unit, add l/811 to each side flanged.
- Removable apron is not available for this unit.
- These dimensions are nominal and subject to change without notice.
ABOUT COMPANY
- Mansfield Plumbing Products, LLC
- Customer Service Toll Free 877-850-3060
- Fax 419-938-6234
- www.mansfieldplumbing.com
- Email: custserv@mansfieldplumbing.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>